The mechanisms producing fast variability of the \(\gamma\)-ray emission in active galactic nuclei are under debate. The MAGIC telescopes detected a fast very high energy (VHE, E\(>100\) GeV) ...\(\gamma\)-ray flare from BL Lacertae on 2015 June 15. The flare had a maximum flux of \((1.5\pm 0.3)\times 10^{-10}\) photons cm\(^{-2}\) s\(^{-1}\) and halving time of \(26\pm8\) minutes. The MAGIC observations were triggered by a high state in the optical and high energy (HE, E\(>100\) MeV) \(\gamma\)-ray bands. In this paper we present the MAGIC VHE \(\gamma\)-ray data together with multiwavelength data from radio, optical, X-rays, and HE \(\gamma\) rays from 2015 May 1 to July 31. Well-sampled multiwavelength data allow us to study the variability in detail and compare it to the other epochs when fast VHE \(\gamma\)-ray flares have been detected from this source. Interestingly, we find that the behaviour in radio, optical, X-rays and HE \(\gamma\)-rays is very similar to two other observed VHE \(\gamma\)-ray flares. In particular, also during this flare there was an indication of rotation of the optical polarization angle and of activity at the 43\,GHz core. These repeating patterns indicate a connection between the three events. We also test modelling of the spectral energy distribution, based on constraints from the light curves and VLBA observations, with two different geometrical setups of two-zone inverse Compton models. In addition we model the \(\gamma\)-ray data with the star-jet interaction model. We find that all of the tested emission models are compatible with the fast VHE \(\gamma\)-ray flare, but all have some tension with the multiwavelength observations.
CERN is pursuing a small scale R&D on a fast cycled superconducting dipole magnet (FCM) of interest for the upgrade plan of the LHC accelerator complex. The FCM dipole prototype being built has a ...number of novel features if compared to other magnets for similar applications. In this paper we describe the magnet design, and its expected performance, focusing especially on the novel features (magnetic circuit, mechanical supports, cooling) and on the details of the manufacturing procedure (coil winding and impregnation, joints, instrumentation and quench protection).
PDF