Our advances in detection and feature extraction in the processing of acoustic signals allow us to capture more information about a target and extract features with separability ...
Low-noise surfaces have become a common mitigation action in the last decade, so much so that different methods for feature extraction have been established to evaluate their efficacy. Among these, ...the Close Proximity Index (CPX) evaluates the noise emissions by means of multiple runs at different speeds performed with a vehicle equipped with a reference tire and with acoustic sensors close to the wheel. However, signals acquired with CPX make it source oriented, and the analysis does not consider the real traffic flow of the studied site for a receiver-oriented approach. These aspects are remedied by Statistical Pass-By (SPB), a method based on sensor feature extraction with live detection of events; noise and speed acquisitions are performed at the roadside in real case scenarios. Unfortunately, the specific SPB requirements for its measurement setup do not allow an evaluation in urban context unless a special setup is used, but this may alter the acoustical context in which the measurement was performed. The present paper illustrates the testing and validation of a method named Urban Pass-By (U-SPB), developed during the LIFE NEREiDE project. U-SPB originates from standard SPB, exploits unattended measurements and develops an in-lab feature detection and extraction procedure. The U-SPB extends the evaluation in terms of before/after data comparison of the efficiency of low-noise laying in an urban context while combining the estimation of long-term noise levels and traffic parameters for other environmental noise purposes, such as noise mapping and action planning.
Most of research in regenerative oral surgery describes materials or techniques for increasing volumetric results for implant-supported prosthesis. The use of bio-materials in alveolar ridge ...preservation after tooth extraction commonly leads to a delayed recovery. Bromelain is an enzyme that belongs to a family of proteolytic enzymes derived from the stem of the pineapple plant (Ananas comosus) with effectiveness in decreasing the inflammation development and swelling. The present paper reports a prospective comparative study performed in order to test the possible use of oral bromelain 40 mg in alveolar ridge preservation. Evaluations were performed at three time points after the surgery: after 2 days (t1), after 7 days (t2) and after 14 days (t3). A statistically significant difference among patients that used bromelain and patients that used placebo resulted among the use of bromelain and lower Visual Analogue Scale (VAS) at t1 (r = −0.75, p = 0.0067), t2 (r = −0.90, p = 0.0001) and t3 (r = −0.8566, p = 0.0008). Bromelain therapy reported a statistically significant difference among patients that used bromelain and patients that used placebo even with regards to the use of bromelain and postoperative swelling at t1 (r = −0.79, p = 0.0034), t2 (r = −0.81, p = 0.0020) but not at t3 (r = −0.34, p = 0.2967). With the result of the present paper, and the poorness of contraindication of the investigated drug, bromelain may be suggested to be used for patients that undergo to alveolar ridge preservation after tooth extraction.
Noise maps and action plans represent the main tools in the fight against citizens' exposure to noise, especially that produced by road traffic. The present and the future in smart traffic control is ...represented by Intelligent Transportation Systems (ITS), which however have not yet been sufficiently studied as possible noise-mitigation tools. However, ITS dedicated to traffic control rely on models and input data that are like those required for road traffic noise mapping. The present work developed an instrumentation based on low-cost cameras and a vehicle recognition and counting methodology using modern machine learning techniques, compliant with the requirements of the CNOSSOS-EU noise assessment model. The instrumentation and methodology could be integrated with existing ITS for traffic control in order to design an integrated method, which could also provide updated data over time for noise maps and action plans. The test was carried out as a follow up of the L.I.S.T. Port project, where an ITS was installed for road traffic management in the Italian port city of Piombino. The acoustic efficacy of the installation is evaluated by looking at the difference in the acoustic impact on the population before and after the ITS installation by means of the distribution of noise exposure, the evaluation of G
and G
, and the calculation of the number of highly annoyed and sleep-disturbed citizens. Finally, it is shown how the ITS system represents a valid solution to be integrated with targeted and more specific sound mitigation, such as the laying of low-emission asphalts.
•Mapping road traffic noise is fundamental for preventing health effects on citizens.•Noise models need to react to social changes and future scenarios.•CNOSSOS-EU coefficients for electric vehicles ...have been calculated starting from Controlled Pass-By measurements in urban scenarios.•The obtained results, with uncertainties, are compared to scientific literature.
Road traffic noise mapping is a fundamental step in the prevention and mitigation of citizens' exposure to noise, which is the cause of well-known and widespread health issues. The most current noise simulation models are not yet ready to adapt to the present and future scenarios of sustainable mobility, manifested by the increasing of electric vehicles. To improve the accuracy of the simulated noise level results, the European CNOSSOS-EU model uses different calculation coefficients for the sound power for each car category. However, for electric vehicles (EVs), such coefficients have not been defined yet, and it is deliberately left open in the decree pending studies dedicated to their definition. In order to fill this gap, the present study defines the CNOSSOS-EU coefficients for calculating the sound power of EVs starting from the Controlled Pass-By measurements in a real case scenario. The analysis performed with four different EVs, considering two different pair of tyres and two different pavements such as reference (RP) and crumb rubber (CRP). A peculiarity of the work is that measurements were deliberately carried out in urban roads since they represent the case where the road traffic noise maps will be used the most to investigate citizens’ exposure to noise. However, this real case scenario implied measurement difficulties which required a specific adaptation of the data analysis procedure. The results are compared with similar studies thus defining values that can be taken as a reference in road noise simulations. Results are the coefficients for the open category (category 5) of CNOSSOS-EU for both RP and CRP, but also a methodology applicable into urban area under real conditions that could act as a basis for other future studies aimed at broadening its applicability and statistical value.
The knowledge of the acoustic impedance of a material allows for the calculation of its acoustic absorption. Impedance can also be linked to structural and physical proprieties of materials. However, ...while the impedance of pavement samples in laboratory conditions can usually be measured with high accuracy using devices such as the impedance tube, complete in-situ evaluation results are less accurate than the laboratory results and is so time consuming that a full scale implementation of in-situ evaluations is practically impossible. Such a system could provide information on the homogeneity and the correct laying of an installation, which is proven to be directly linked to its acoustic emission properties. The present work studies the development of a measurement instrument which can be fastened through holding elements to a moving laboratory (i.e., a vehicle). This device overcomes the issues that afflict traditional in-situ measurements, such as the impossibility to perform a continuous spatial characterization of a given pavement in order to yield a direct evaluation of the surface's quality. The instrumentation has been uncoupled from the vehicle's frame with a system including a Proportional Integral Derivative (PID) controller, studied to maintain the system at a fixed distance from the ground and to reduce damping. The stabilization of this device and the measurement system itself are evaluated and compared to the traditional one.
Noise barriers are the most widespread solution to mitigate noise produced by the continuous growth of vehicular traffic, thus reducing the large number of people exposed to it and avoiding ...unpleasant effects on health. However, conventional noise barriers present the well-known issues related to the diffraction at the edges which reduces the net insertion loss, to the reflection of sound energy in the opposite direction, and to the complaints of citizens due to the reduction of field of view, natural light, and air flow. In order to avoid these shortcomings and maximize noise abatement, recent research has moved toward the development of sonic crystals as noise barriers. A previous review found in the literature was focused on the theoretical aspects of the propagation of sound through crystals. The present work on the other hand reviews the latest studies concerning the practical application of sonic crystal as noise barriers, especially for road traffic noise mitigation. The paper explores and compares the latest developments reported in the scientific literature, focused on integrating Bragg’s law properties with other mitigation effects such as hollow scatterers, wooden or recycled materials, or porous coating. These solutions could increase the insertion loss and frequency band gap, while inserting the noise mitigation action in a green and circular economy. The pros and cons of sonic crystal barriers will also be discussed, with the aim of finding the best solution that is actually viable, as well as stimulating future research on the aspects requiring improvement.
Maritime transportation is recognized to have advantages in terms of environmental impact compared to other forms of transportation. However, an increment in traffic volumes will also produce an ...increase in noise emissions in the surroundings for a greener source, as ports are frequently surrounded by urban areas. When more sources or higher noise emissions are introduced, the noise exposure of citizens increases, and the likelihood of official complaints rises. As a consequence, among the most demanding aspects of port management is effective noise management aimed at a reduction in the exposure of citizens while ensuring the growth of maritime traffic. At the same time, the topic has not been thoroughly studied by the scientific community, mostly because port areas are challenging from a noise management point of view; they are often characterized by a high degree of complexity, both in terms of the number of different noise sources and their interaction with the other main transportation infrastructure. Therefore, an effective methodology of noise modeling of the port area is currently missing. With regard to the INTERREG Maritime Program, the present paper reports a first attempt to define noise mapping guidelines. On the basis of the current state-of-the-art and the authors’ experiences, noise sources inside port areas can be divided into several different categories: road sources, railway sources, ship sources, port sources, and industrial sources. A further subdivision can be achieved according to the working operation mode and position of the sources. This classification simplifies actions of identification of the responsible source from control bodies, in the case that noise limits are exceeded or citizen complaints arise. It also represents a necessary tool to identify the best placing of medium/long-term noise monitoring stations. The results also act as a base for a future definition of specific and targeted procedures for the acoustic characterization of port noise sources.
After being neglected for a long time, in the last years, ships have been recognized and studied as sound emitters. The sound energy they generate impacts the outside, but it can also affect the ...indoor quality of life if the environments are not properly designed. In fact, acoustic comfort plays a pivotal role, particularly in recreational crafts. In the present work, room acoustics and acoustic camera measurements were performed, inside a 50 m length overall yacht, chosen as a case study in order to evaluate the acoustic comfort. The Italian classification procedure UNI 11367:2010 for buildings was applied, and results have been compared to other international comfort classes. However, all of these are based on prescription for standard buildings, and the present work highlights that they do not account for the effective ship’s acoustic issues: sound energy transfer from impacts over ceilings and sound energy leakage. While attention of shipbuilders in acoustic comfort is shown in the measured good reverberation times, the acoustic camera revealed sound energy leakages corresponding to hidden escape ways that have been poorly insulated. This compromises the standardized sound difference between contiguous compartments and also the thermal insulation, as leakage involves air passages. The present work attempts to evolve the classification procedure by also including, for the first time, the reverberation time, but future studies focused on finding correct standardized impact level noise for ship cases are needed. In fact, their values were very high and not comparable with those measured in actual buildings and for which reference values have been designed.
Maritime transport for both passengers and freight is continuously increasing and, consequently, the global attention toward its sustainability is growing. Ships offer advantages in terms of ...environmental impact compared to other transportation systems but the increasing traffic volume is expected to increase pollutants. Noise produced in port areas has been neglected for too long, until the INTERREG Maritime programme Italy-France 2014–2020 has brought to light how citizen complaints are emerging for some of the main ports in the Mediterranean. However, port noise prevention and management is difficult as knowledge on specific sources is very limited in the literature. Furthermore, on field measurements are difficult to be performed given the complexity of the port area, where multiple types of sound emitters mix and confuse each other.
Noise maps represent the first important step in order to align ports to the requirements set by the Environmental Noise Directive to the transportation infrastructures. Once computed, they are an excellent tool supporting port management towards the reduction of citizens’ noise exposure while ensuring traffic growth.
The present paper reports a guideline for the characterization of noise sources needed as inputs for the noise maps, as developed in the framework of the INTERREG Maritime programme Italy-France 2014–2020. On the basis of the current state of the art, a procedure has been elaborated for different categories of noise sources acting in port, ranging from stationary to moving ships, from mooring operations to loading/unloading operations, from industrial activities to road and railway traffic.
Port noise; Guidelines; Sources characterization; Interreg maritime programme; Noise of transport infrastructures.