A new dc high voltage spin-polarized photoelectron gun has been constructed that employs a compact inverted-geometry ceramic insulator. Photogun performance at 100 kV bias voltage is summarized.
A polarimeter was constructed to measure the longitudinal polarization of a spin-polarized electron beam at 5 and 7 MeV. The polarimeter takes advantage of Compton scattering between circularly ...polarized bremsstrahlung photons produced by a longitudinally polarized electron beam striking a copper radiator and the spin-polarized electrons orbiting the iron atoms of an analyzing magnet. This so-called Compton transmission polarimeter is compact and relatively inexpensive compared to Mott-scattering polarimeters because no spin manipulator is required. This work presents the design of the radiator, analyzing magnet, photon detector assembly, and data acquisition system of the Compton transmission polarimeter as well as beam commissioning results performed at the Upgraded Injector Test Facility at Jefferson Lab.
GaAs-based dc high voltage photoguns used at accelerators with extensive user programs must exhibit long photocathode operating lifetime. Achieving this goal represents a significant challenge for ...proposed high average current facilities that must operate at tens of milliamperes or more. This paper describes techniques to maintain good vacuum while delivering beam, and techniques that minimize the ill effects of ion bombardment, the dominant mechanism that reduces photocathode yield of a GaAs-based dc high voltage photogun. Experimental results presented here demonstrate enhanced lifetime at high beam currents by: (a) operating with the drive laser beam positioned away from the electrostatic center of the photocathode, (b) limiting the photocathode active area to eliminate photoemission from regions of the photocathode that do not support efficient beam delivery, (c) using a large drive laser beam to distribute ion damage over a larger area, and (d) by applying a relatively low bias voltage to the anode to repel ions created within the downstream beam line. A combination of these techniques provided the best total charge extracted lifetimes in excess of 1000 C at dc beam currents up to 9.5 mA, using green light illumination of bulk GaAs inside a 100 kV photogun.
Beam test of a harmonic kicker cavity Bruker, M W; Grames, J; Guo, J ...
Journal of physics. Conference series,
01/2024, Letnik:
2681, Številka:
1
Journal Article
Recenzirano
Odprti dostop
Abstract
A harmonically resonant kicker cavity designed for beam exchange in a circulator cooler was built and successfully tested at the Upgraded Injector Test Facility (UITF) at Jefferson Lab. This ...type of cavity is being considered for the injection scheme of the Rapid Cycling Synchrotron at the Electron-Ion Collider, where the spacing of neighboring bunches demands very short kicks. Operating with five transversely deflecting modes simultaneously that resonate at 86.6 MHz and consecutive odd harmonics thereof, the prototype cavity selectively deflects 1 of 11 electron bunches while leaving the others unperturbed. An RF driver was developed to synthesize phase- and amplitude-controlled harmonic signals and combine them to drive the cavity while also separating the modes from a field-probe antenna for RF feedback and dynamic tuning. Beam deflection was measured by sweeping the cavity phase; the deflection waveform agrees with expectations, having sub-nanosecond rise and fall times. No emittance increase is observed. Harmonically resonant cavities like the one described provide a new capability for injection and extraction at circulators and rings.
The unpolarized and polarized Beam Charge Asymmetries (BCAs) of the
e
→
±
p
→
e
±
p
γ
process off unpolarized hydrogen are discussed. The measurement of BCAs with the CLAS12 spectrometer at the ...Thomas Jefferson National Accelerator Facility, using polarized positron and electron beams at 10.6 GeV is investigated. This experimental configuration allows to measure azimuthal and
t
-dependences of the unpolarized and polarized BCAs over a large
(
x
B
,
Q
2
)
phase space, providing a direct access to the real part of the Compton Form Factor (CFF)
H
. Additionally, these measurements confront the Bethe-Heitler dominance hypothesis and eventual effects beyond leading twist. The impact of potential positron beam data on the determination of CFFs is also investigated within a local fitting approach of experimental observables. Positron data are shown to strongly reduce correlations between CFFs and consequently improve significantly the determination of
R
e
H
.
This contribution describes the latest milestones of a multiyear program to build and operate a compact−300kVdc high voltage photogun with inverted insulator geometry and alkali-antimonide ...photocathodes. Photocathode thermal emittance measurements and quantum efficiency charge lifetime measurements at average current up to 4.5 mA are presented, as well as an innovative implementation of ion generation and tracking simulations to explain the benefits of a biased anode to repel beam line ions from the anode-cathode gap, to dramatically improve the operating lifetime of the photogun and eliminate the occurrence of micro-arc discharges.
CsxKySbphotocathodes grown on GaAs and molybdenum substrates were evaluated using a−300kVdc high voltage photogun and diagnostic beam line. Photocathodes grown on GaAs substrates, with varying ...antimony layer thickness (estimated range from 1um), yielded similar thermal emittance per rms laser spot size values (∼0.4mmmrad/mm) but very different operating lifetime. Similar thermal emittance was obtained for a photocathode grown on a molybdenum substrate but with markedly improved lifetime. For this photocathode, no decay in quantum efficiency was measured at 4.5 mA average current and with peak current 0.55 A at the photocathode.
PDF
