Synovial explants furnish an in-situ population of mesenchymal stem cells for the repair of articular cartilage. Although bone morphogenetic protein 2 (BMP-2) induces the chondrogenesis of bovine ...synovial explants, the cartilage formed is neither homogeneously distributed nor of an exclusively hyaline type. Furthermore, the downstream differentiation of chondrocytes proceeds to the stage of terminal hypertrophy, which is inextricably coupled with undesired matrix mineralization. With a view to optimizing BMP-2-induced chondrogenesis, the modulating influences of fibroblast growth factor 2 (FGF-2) and transforming growth factor beta 1 (TGF-ß1) were investigated.
Explants of bovine calf metacarpal synovium were exposed to BMP-2 (200 ng/ml) for 4 (or 6) weeks. FGF-2 (10 ng/ml) or TGF-ß1 (10 ng/ml) was introduced at the onset of incubation and was present either during the first week of culturing alone or throughout its entire course. FGF-2 enhanced the BMP-2-induced increase in metachromatic staining for glycosaminoglycans (GAGs) only when it was present during the first week of culturing alone. TGF-ß1 enhanced not only the BMP-2-induced increase in metachromasia (to a greater degree than FGF-2), but also the biochemically-assayed accumulation of GAGs, when it was present throughout the entire culturing period; in addition, it arrested the downstream differentiation of cells at an early stage of hypertrophy. These findings were corroborated by an analysis of the gene- and protein-expression levels of key cartilaginous markers and by an estimation of individual cell volume.
TGF-ß1 enhances the BMP-2-induced chondrogenesis of bovine synovial explants, improves the hyaline-like properties of the neocartilage, and arrests the downstream differentiation of cells at an early stage of hypertrophy. With the prospect of engineering a mature, truly articular type of cartilage in the context of clinical repair, our findings will be of importance in fine-tuning the stimulation protocol for the optimal chondrogenic differentiation of synovial explants.
Numerous attempts have been made to develop an efficacious strategy for the repair of articular cartilage. These endeavors have been undaunted, if not spurred, by the challenge of the task and by the ...largely disappointing outcomes in animal models. Of the strategies that have been lately applied in a clinical setting, the autologous‐chondrocyte‐transplantation technique is the most notorious example. This methodology, which was prematurely launched on the clinical scene, was greeted with enthusiasm and has been widely adopted. However, a recent prospective and randomized clinical trial has revealed the approach to confer no advantage over conventional microfracturing. Why is the repair of articular cartilage such a seemingly intractable problem? The root of the evil undoubtedly lies in the tissue's poor intrinsic healing capacity. But the failure of investigators to tackle the biological stumbling blocks systematically rather than empirically is hardly a less inauspicious circumstance. Moreover, it is a common misbelief that the formation of hyaline cartilage per se suffices, whereas to be durable and functionally competent, the tissue must be fully mature. An appreciation of this necessity, coupled with a thorough understanding of the postnatal development of articular cartilage, would help to steer investigators clear of biological cul‐de‐sacs.
Many attempts have been made to develop an efficacious cartilage‐repair strategy for osteoarthritic lesions, but without much success. Investigators must themselves bare a share of the responsibility for these disappointing results: Historically, the problem has been tackled empirically rather than rationally and systematically. The state of the art in the field is surveyed and possible ways forward are suggested.
No single processing technique is capable of optimally preserving each and all of the structural entities of cartilaginous tissue. Hence, the choice of methodology must necessarily be governed by the ...nature of the component that is targeted for analysis, for example, fibrillar collagens or proteoglycans within the extracellular matrix, or the chondrocytes themselves.
This article affords an insight into the pitfalls that are to be encountered when implementing the available techniques and how best to circumvent them.
Adult articular cartilage is taken as a representative pars pro toto of the different bodily types. In mammals, this layer of tissue is a component of the synovial joints, wherein it fulfills crucial and diverse biomechanical functions. The biomechanical functions of articular cartilage have their structural and molecular correlates. During the natural course of postnatal development and after the onset of pathological disease processes, such as osteoarthritis, the tissue undergoes structural changes which are intimately reflected in biomechanical modulations. The fine structural intricacies that subserve the changes in tissue function can be accurately assessed only if they are faithfully preserved at the molecular level. For this reason, a careful consideration of the tissue-processing technique is indispensable. Since, as aforementioned, no single methodological tool is capable of optimally preserving all constituents, the approach must be pre-selected with a targeted structure in view. Guidance in this choice is offered.
•A comprehensive overview of cartilage-preservation techniques•Insight into the pitfalls that are associated with different methodological tools•Guidance in the choice of techniques to optimally preserve specific matrix components•The implementation of complimentary methodologies is advised.
The inner surface layer of human joints, the synovium, is a source of stem cells for the repair of articular cartilage defects. We investigated the potential of the normal human synovium to form ...novel cartilage and compared its chondrogenic capacity with that of two patient groups suffering from major joint diseases: young adults with femoro-acetabular impingement syndromes of the hip (FAI), and elderly individuals with osteoarthritic degeneration of the knee (OA). Synovial membrane explants of these three patient groups were induced in vitro to undergo chondrogenesis by growth factors: bone morphogenetic protein-2 (BMP-2) alone, transforming growth factor-β1 (TGF-β1) alone, or a combination of these two. Quantitative evaluations of the newly formed cartilages were performed respecting their gene activities, as well as the histochemical, immunhistochemical, morphological and histomorphometrical characteristics. Formation of adult articular-like cartilage was induced by the BMP-2/TGF-β1 combination within all three groups, and was confirmed by adequate gene-expression levels of the anabolic chondrogenic markers; the levels of the catabolic markers remained low. Our data reveal that the chondrogenic potential of the normal human synovium remains uncompromised, both in FAI and OA. The potential of synovium-based clinical repair of joint cartilage may thus not be impaired by age-related joint pathologies.
(1) Background: We tested the hypothesis that hyaluronic acid (HA) can significantly promote the osteogenic potential of BMP-2/ACS (absorbable collagen sponge), an efficacious product to heal large ...oral bone defects, thereby allowing its use at lower dosages and, thus, reducing its side-effects due to the unphysiologically-high doses of BMP-2; (2) Methods: In a subcutaneous bone induction model in rats, we first sorted out the optimal HA-polymer size and concentration with micro CT. Thereafter, we histomorphometrically quantified the effect of HA on new bone formation, total construct volume, and densities of blood vessels and macrophages in ACS with 5, 10, and 20 μg of BMP-2; (3) Results: The screening experiments revealed that the 100 µg/mL HA polymer of 48 kDa molecular weight could yield the highest new bone formation. Eighteen days post-surgery, HA could significantly enhance the total volume of newly-formed bone by approximately 100%, and also the total construct volume in the 10 μg BMP-2 group. HA could also significantly enhance the numerical area density of blood vessels in 5 μg BMP-2 and 10 μg BMP-2 groups. HA did not influence the numerical density of macrophages; and (4) Conclusions: An optimal combined administration of HA could significantly promote osteogenic and angiogenic activity of BMP-2/ACS, thus potentially minimizing its potential side-effects.
Bone typing is crucial to enable the choice of a suitable implant, the surgical technique, and the evaluation of the clinical outcome. Currently, bone typing is assessed subjectively by the surgeon.
...The aim of this study is to establish an automatic quantification method to determine local bone types by the use of cone-beam computed tomography (CBCT) for an observer-independent approach.
Six adult human cadaver skulls were used. The 4 generally used bone types in dental implantology and orthodontics were identified, and specific Hounsfield unit (HU) ranges (grey-scale values) were assigned to each bone type for identification by quantitative CBCT (qCBCT). The selected scanned planes were labelled by nonradiolucent markers for reidentification in the backup/cross-check evaluation methods. The selected planes were then physically removed as thick bone tissue sections for in vitro correlation measurements by qCBCT, quantitative micro–computed tomography (micro-CT), and quantitative histomorphometry.
Correlation analyses between the different bone tissue quantification methods to identify bone types based on numerical ranges of HU values revealed that the Pearson correlation coefficient of qCBCT with micro-CT and quantitative histomorphometry was R = 0.9 (P = .001) for all 4 bone types .
We found that qCBCT can reproducibly and objectively assess human bone types at implant sites.
Abstract Osteogenic agents, such as bone morphogenetic protein-2 (BMP-2), can stimulate the degradation as well as the formation of bone. Hence, they could impair the osteoconductivity of ...functionalized implant surfaces. We assessed the effects of BMP-2 and its mode of delivery on the osteoconductivity of dental implants with either a naked titanium surface or a calcium-phosphate-coated one. The naked titanium surface bore adsorbed BMP-2, whilst the coated one bore incorporated, adsorbed, or incorporated and adsorbed BMP-2. The implants were inserted into the maxillae of adult miniature pigs. The volume of bone deposited within a defined “osteoconductive” (peri-implant) space, and bone coverage of the implant surface delimiting this space, were estimated morphometrically 1–3 weeks later. After 3 weeks, the volume of bone deposited within the osteoconductive space was highest for coated and uncoated implants bearing no BMP-2, followed by coated implants bearing incorporated BMP-2; it was lowest for coated implants bearing only adsorbed BMP-2. Bone-interface coverage was highest for coated implants bearing no BMP-2, followed by coated implants bearing either incorporated, or incorporated and adsorbed BMP-2; it was lowest for uncoated implants bearing adsorbed BMP-2. Hence, the osteoconductivity of implant surfaces can be significantly modulated by BMP-2 and its mode of delivery.