The receptor tyrosine kinase Ror2 has recently been shown to act as an alternative receptor or coreceptor for Wnt5a and to mediate Wnt5a-induced migration of cultured cells. However, little is known ...about the molecular mechanism underlying this migratory process. Here we show by wound-healing assays that Ror2 plays critical roles in Wnt5a-induced cell migration by regulating formation of lamellipodia and reorientation of microtubule-organizing center (MTOC). Wnt5a stimulation induces activation of the c-Jun N-terminal kinase JNK at the wound edge in a Ror2-dependent manner, and inhibiting JNK activity abrogates Wnt5a-induced lamellipodia formation and MTOC reorientation. Additionally, the association of Ror2 with the actin-binding protein filamin A is required for Wnt5a-induced JNK activation and polarized cell migration. We further show that Wnt5a-induced JNK activation and MTOC reorientation can be suppressed by inhibiting PKCζ. Taken together, our findings indicate that Wnt5a/Ror2 activates JNK, through a process involving filamin A and PKCζ, to regulate polarized cell migration.
A single-pulse TMS to the human motor cortex (M1) influences reaction time (RT). We may summarize from previous studies where different groups of subjects participated in various types of RT tasks ...that TMS above motor threshold (MT) delays RT, whereas TMS below MT shortens RT and that these RT changes depends on TMS timings during RT period. However, these effects have never been systematically investigated in a single study where an identical group of subjects participated. The purpose of this study is to test previous TMS effects in a study of simple RT task. Seven subjects isometrically abducted their right index fingers as quickly as possible when a visual stimulus appeared. A single-pulse TMS was randomly delivered over the left M1 at various timings during RT period in a single trial (at 0, 40, 60, 80 or 100
ms after the visual stimulus). Motor-evoked potential (MEP) and EMG activity for response were recorded from the right finger muscles. Only the TMS above MT delivered at 80 or 100
ms, which increased MEP amplitude, significantly delayed RT and increased the size of response EMG activities that may reflect contents of central motor commands. The TMS below MT at these timings, which occasionally evoked MEP, exclusively shortened RT despite the fact that the response EMG size was unchanged. A single-pulse TMS has different effects on the ongoing neuronal processes in M1 during the pre-movement period: TMS above MT may temporally retard the processes and also affect contents of central motor commands, whereas TMS below MT may simply facilitate its processes without affecting motor commands.
Summary Hepatitis C-associated osteosclerosis (HCAO), a very rare disorder in which an extremely rapid bone turnover occurs and results in osteosclerosis, was acknowledged in 1990s as a new clinical ...entity with the unique bone disorder and definite link to chronic type C hepatitis, although the pathogenesis still remains unknown. Affected patients suffer from excruciating deep bone pains. We report the 19th case of HCAO with diagnosis confirmed by bone biopsy, and treated initially with a bisphosphonate, next with corticosteroids and finally with direct acting antivirals (DAA: sofosbuvir and ribavirin) for HCV infection. Risedronate, 17.5 mg/day for 38 days, did not improve the patient’s symptoms or extremely elevated levels of bone markers, which indicated hyper-bone-formation and coexisting hyper-bone-resorption in the patient. Next, intravenous methylprednisolone pulse therapy followed by high-dose oral administration of prednisolone evidently improved them. DAA therapy initiated after steroid therapy successfully achieved sustained virological response, but no additional therapeutic effect on them was observed. Our results strongly suggested that the underlying immunological alteration is the crucial key to clarify the pathogenesis of HCAO. Bone mineral density of lumbar vertebrae of the patient was increased by 14% in four-month period of observation. Clarification of the mechanisms that develop osteosclerosis in HCAO might lead to a new therapeutic perspective for osteoporosis. Learning points: HCAO is an extremely rare bone disorder, which occurs exclusively in patients affected with HCV, of which only 18 cases have been reported since 1992 and pathogenesis still remains unclear. Pathophysiology of HCAO is highly accelerated rates of both bone formation and bone resorption, with higher rate of formation than that of resorption, which occur in general skeletal leading to the diffuse osteosclerosis with severe bone pains. Steroid therapy including intravenous pulse administration in our patient evidently ameliorated his bone pains and reduced elevated values of bone markers. This was the first successful treatment for HCAO among cases reported so far and seemed to propose a key to solve the question for its pathogenesis. The speed of increase in the bone mineral content of the patient was very high, suggesting that clarification of the mechanism(s) might lead to the development of a novel therapy for osteoporosis.
Viscoelastic properties of wet pulp fiber networks as a function of fiber concentration were investigated with a parallel-plates type rheometer. The dynamic storage moduli, G', of the networks were ...independent of angular frequency: i.e., they are the pseudo-equilibrium moduli. A power law correlation was found between the moduli and volume concentrations, cv, of the networks: G' = kcvα. The factor, k, changed with the beating degree, which is an index of fiber flexibility. This indicates that the factor, k, reflects the individual fiber characteristics. On the other hand, the exponent, α, was constant and the value was written as three for all the measured fiber networks, regardless of the beating degree. This indicates that the exponent does not reflect the individual fiber properties but the properties of the whole network structure.
The purpose of this study was to investigate the relationship between electrical resistance (ECM) measurements and microradiographic variables during remineralization of softened enamel lesions. ...Sound bovine enamel blocks were demineralized and, subsequently, were remineralized for 3, 4, 5, 7 or 14 days. All the specimens were assessed by ECM and transversal microradiography. The mean ECM values in each group increased after remineralization. The ECM values after remineralization (ECM1), mineral loss (DeltaZ) and maximum mineral content in the surface layer (V(max)) were significantly correlated with the remineralization time. The ECM1 values were also significantly correlated with DeltaZ and V(max). It is suggested that ECM could be used as a device to monitor mineral accumulation as a result of preventive treatment in vitro. However, it may take a much longer time to follow up the remineralization changes compared with demineralization.
Highlights • QLF-D can be used to classify differences between before and after RI. • The presence of RI can be confirmed from fluorescence images obtained using QLF technology. • QLF technology can ...be used as a nondestructive and real-time assessment tool for RI.
Background: The aim of this study is to evaluate the validity of screening methods in predicting periodontitis in people with disabilities using the objective salivary hemoglobin level, a subjective ...self‐report questionnaire, and a combined model of the two methods with demographic characteristics.
Methods: The participants were 195 patients with disabilities aged >18 years who were examined using the community periodontal index (CPI), salivary hemoglobin level, and answers to 10 self‐report questions (n = 192). Multivariable logistic regression and receiver operating characteristic (ROC) curve analysis were performed to evaluate the validity of the methods and the combined model in predicting the prevalence of ≥CPI 3 (probing depth PD ≥4 mm) or CPI 4 (PD ≥6 mm).
Results: Overall, 75.9% of the study group (148 of 195) were diagnosed with ≥CPI 3, and 38.5% of the study group (75 of 195) were diagnosed with CPI 4. The areas under the ROC curve (AUCs) of the salivary hemoglobin level were 0.578 (sensitivity of 41% and specificity of 77%) and 0.662 (sensitivity of 53% and specificity of 75%) for predicting the prevalence of ≥CPI 3 and CPI 4, respectively. Multivariable modeling incorporating four different questions for predicting ≥CPI 3 or CPI 4 indicated higher AUCs of 0.710 and 0.732, respectively, yielding higher sensitivity (55% for ≥CPI 3 and 69% for CPI 4) than that of salivary hemoglobin level. The most useful prediction models for ≥CPI 3 or CPI 4 were combined models, which yielded AUCs of 0.773 and 0.807, respectively, with sensitivity values of 70% and specificity values >75%.
Conclusion: The salivary hemoglobin level, self‐report questionnaire, and the combined method demonstrated screening potential that could predict the population prevalence of ≥CPI 3 or CPI 4.
To improve the vat dyeing of cotton knit fabric with Indanthren Black RB Coll. (CI Vat Black 9), the basic parameters of dyeing, including the concentrations of chemicals, the dyeing temperature and ...duration, and the apparent diffusion coefficient of the dye, were obtained by test dyeing with a stoppered Erlenmeyer flask and the cellophane film roll method. A stable vat dyeing process has been developed on a modified jet dyeing machine for the first time without using nitrogen to purge oxygen. Modifications were made to improve the airtightness of the machine and the equipment in the liquor circulating system, with a water inlet and outlet for the gentle oxidation of dyed fabric, and with monitoring by means of a sensor inserted in the liquor circulating system for in situ measurements of the redox potential and the pH of the dyeing liquors. These measurements made it possible to follow to their completion the process of dyeing and the process of gentle oxidation by overflow washing with water and final oxidation. Optimal conditions with regard to the amount of reducing agent, the dyeing temperature (80 °C), and oxidising processes were established with this machine. It was found that, by using the modified machine and process conditions, dyeing proceeded stably and reproducibly (at 80 °C) to yield grade A dyed fabric. Visual inspection confirmed that faultless deep‐colour dyeing of the fabric was attained. Production has been proceeding successfully for the past 2 years. Owing to its insolubility, complete removal of the dye from the wastewater has been possible.
PDF
