Current‐density–voltage (J–V) hysteresis in perovskite solar cells (PSCs) is a critical issue because it is related to power conversion efficiency and stability. Although parameters affecting the ...hysteresis have been already reported and reviewed, little investigation is reported on scan‐direction‐dependent J–V curves depending on perovskite composition. This review investigates J–V hysteric behaviors depending on perovskite composition in normal mesoscopic and planar structure. In addition, methodologies toward hysteresis‐free PSCs are proposed. There is a specific trend in hysteresis in terms of J–V curve shape depending on composition. Ion migration combined with nonradiative recombination near interfaces plays a critical role in generating hysteresis. Interfacial engineering is found to be an effective method to reduce the hysteresis; however, bulk defect engineering is the most promising method to remove the hysteresis. Among the studied methods, KI doping is proved to be a universal approach toward hysteresis‐free PSCs regardless of perovskite composition. It is proposed from the current studies that engineering of perovskite film near the electron transporting layer (ETL) and the hole transporting layer (HTL) is of vital importance for achieving hysteresis‐free PSCs and extremely high efficiency.
Photocurrent–voltage hysteresis in perovskite solar cells (PSCs) induced by ion migration combined with nonradiative recombination near the interface depends on perovskite composition and device structure. Among the methods used in the attempt to reduce the hysteresis, potassium‐ion doping is found to be a universal approach toward hysteresis‐free PSCs regardless of perovskite composition.
The rediscovery of graphene in 2004 triggered an explosive expansion of research on various van der Waals (vdW) materials. The atomic layers of these vdW materials do not have surface crystal defects ...and are bonded by weak vdW interactions, thus the vdW materials can be stacked onto each other to form vdW heterojunction structures without needing to consider the lattice mismatch issue. In addition, the broad library of vdW materials makes it possible to design diverse types of heterojunctions with a wide range of band alignments, bandgaps, and electron affinities. Vertical vdW heterostructures especially offer numerous possibilities for the realization of high-performance electronic and optoelectronic devices. Therefore, these vdW heterostructures have received significant attention, and extensive relevant experimental results have been reported in the past few years. In this review, we first introduce the transfer techniques to form vdW heterojunction structures. Next, we discuss recent progress in vdW heterostructure-based electronic and optoelectronic devices, including vertical field effect transistors, negative differential resistance devices, memories, photodetectors, photovoltaic devices, and light-emitting diodes. Finally, we conclude this review by discussing the current challenges facing vdW heterojunction structure-based devices and our perspective on future research directions.
Display omitted
An ultrahigh performance MoS2 photodetector with high photoresponsivity (1.94 × 106 A W–1) and detectivity (1.29 × 1012 Jones) under 520 nm and 4.63 pW laser exposure is demonstrated. This ...photodetector is based on a methyl‐ammonium lead halide perovskite/MoS2 hybrid structure with (3‐aminopropyl)triethoxysilane doping. The performance degradation caused by moisture is also minimized down to 20% by adopting a new encapsulation bilayer of octadecyltrichlorosilane/polymethyl methacrylate.
Use of intravascular ultrasound (IVUS) promotes better clinical outcomes for coronary intervention in complex coronary lesions. However, randomized data demonstrating the clinical usefulness of IVUS ...are limited for lesions treated with drug-eluting stents.
To determine whether the long-term clinical outcomes with IVUS-guided drug-eluting stent implantation are superior to those with angiography-guided implantation in patients with long coronary lesions.
The Impact of Intravascular Ultrasound Guidance on Outcomes of Xience Prime Stents in Long Lesions (IVUS-XPL) randomized, multicenter trial was conducted in 1400 patients with long coronary lesions (implanted stent ≥28 mm in length) between October 2010 and July 2014 at 20 centers in Korea.
Patients were randomly assigned to receive IVUS-guided (n = 700) or angiography-guided (n = 700) everolimus-eluting stent implantation.
Primary outcome measure was the composite of major adverse cardiac events, including cardiac death, target lesion-related myocardial infarction, or ischemia-driven target lesion revascularization at 1 year, analyzed by intention-to-treat.
One-year follow-up was complete in 1323 patients (94.5%). Major adverse cardiac events at 1 year occurred in 19 patients (2.9%) undergoing IVUS-guided and in 39 patients (5.8%) undergoing angiography-guided stent implantation (absolute difference, -2.97% 95% CI, -5.14% to -0.79%) (hazard ratio HR, 0.48 95% CI, 0.28 to 0.83, P = .007). The difference was driven by a lower risk of ischemia-driven target lesion revascularization in patients undergoing IVUS-guided (17 2.5%) compared with angiography-guided (33 5.0%) stent implantation (HR, 0.51 95% CI, 0.28 to 0.91, P = .02). Cardiac death and target lesion-related myocardial infarction were not significantly different between the 2 groups. For cardiac death, there were 3 patients (0.4%) in the IVUS-guided group and 5 patients (0.7%) in the angiography-guided group (HR, 0.60 95% CI, 0.14 to 2.52, P = .48). Target lesion-related myocardial infarction occurred in 1 patient (0.1%) in the angiography-guided stent implantation group (P = .32).
Among patients requiring long coronary stent implantation, the use of IVUS-guided everolimus-eluting stent implantation, compared with angiography-guided stent implantation, resulted in a significantly lower rate of the composite of major adverse cardiac events at 1 year. These differences were primarily due to lower risk of target lesion revascularization.
clinicaltrials.gov Identifier: NCT01308281.
A high‐performance ReS2‐based thin‐film transistor and photodetector with high on/off‐current ratio (104), high mobility (7.6 cm2 V−1 s−1), high photoresponsivity (2.5 × 107 A W−1), and fast temporal ...response (rising and decaying time of 670 ms and 5.6 s, respectively) through O2 plasma treatment is reported.
Most doping research into transition metal dichalcogenides (TMDs) has been mainly focused on the improvement of electronic device performance. Here, the effect of self‐assembled monolayer (SAM)‐based ...doping on the performance of WSe2‐ and MoS2‐based transistors and photodetectors is investigated. The achieved doping concentrations are ≈1.4 × 1011 for octadecyltrichlorosilane (OTS) p‐doping and ≈1011 for aminopropyltriethoxysilane (APTES) n‐doping (nondegenerate). Using this SAM doping technique, the field‐effect mobility is increased from 32.58 to 168.9 cm2 V−1 s in OTS/WSe2 transistors and from 28.75 to 142.2 cm2 V−1 s in APTES/MoS2 transistors. For the photodetectors, the responsivity is improved by a factor of ≈28.2 (from 517.2 to 1.45 × 104 A W−1) in the OTS/WSe2 devices and by a factor of ≈26.4 (from 219 to 5.75 × 103 A W−1) in the APTES/MoS2 devices. The enhanced photoresponsivity values are much higher than that of the previously reported TMD photodetectors. The detectivity enhancement is ≈26.6‐fold in the OTS/WSe2 devices and ≈24.5‐fold in the APTES/MoS2 devices and is caused by the increased photocurrent and maintained dark current after doping. The optoelectronic performance is also investigated with different optical powers and the air‐exposure times. This doping study performed on TMD devices will play a significant role for optimizing the performance of future TMD‐based electronic/optoelectronic applications.
High‐performance transition metal dichalcogenides (TMD) photodetectors are enhanced by self‐assembled monolayer (SAM) doping. The photoresponsivity of WSe2 and MoS2 photodetectors is improved by a factor of ≈28.2 (with OTS p‐doping) and ≈26.4 (with APTES n‐doping), respectively. These improvements are attributed to the enhancement of TMD optical properties by SAM doping and this is also investigated in detail through photoluminescence analysis.
Highly efficient and bendable organic solar cells (OSCs) are fabricated using solution‐processed silver nanowire (Ag NW) electrodes. The Ag NW films were highly transparent (diffusive transmittance ≈ ...95% at a wavelength of 550 nm), highly conductive (sheet resistance ≈ 10 Ω sq−1), and highly flexible (change in resistance ≈ 1.1 ± 1% at a bending radius of ≈200 μm). Power conversion efficiencies of ≈5.80 and 5.02% were obtained for devices fabricated on Ag NWs/glass and Ag NWs/poly(ethylene terephthalate) (PET), respectively. Moreover, the bendable devices fabricated using the Ag NWs/PET films decrease slightly in their efficiency (to ≈96% of the initial value) even after the devices had been bent 1000 times with a radius of ≈1.5 mm.
Highly bendable and efficient organic solar cells are developed using solution‐processed silver nanowires. The electrode and solar cell characterizations are also presented with the devices showing high performance and flexibility.
Abstract
The recent reports of various photodetectors based on molybdenum disulfide (MoS
2
) field effect transistors showed that it was difficult to obtain optoelectronic performances in the broad ...detection range visible–infrared (IR) applicable to various fields. Here, by forming a mono-/multi-layer nano-bridge multi-heterojunction structure (more than > 300 junctions with 25 nm intervals) through the selective layer control of multi-layer MoS
2
, a photodetector with ultrasensitive optoelectronic performances in a broad spectral range (photoresponsivity of 2.67 × 10
6
A/W at
λ
= 520 nm and 1.65 × 10
4
A/W at
λ
= 1064 nm) superior to the previously reported MoS
2
-based photodetectors could be successfully fabricated. The nano-bridge multi-heterojunction is believed to be an important device technology that can be applied to broadband light sensing, highly sensitive fluorescence imaging, ultrasensitive biomedical diagnostics, and ultrafast optoelectronic integrated circuits through the formation of a nanoscale serial multi-heterojunction, just by adding a selective layer control process.
Exercise is a well-known non-pharmacological intervention to improve brain functions, including cognition, memory, and motor coordination. Contraction of skeletal muscles during exercise releases ...humoral factors that regulate the whole-body metabolism via interaction with other non-muscle organs. Myokines are muscle-derived effectors that regulate body metabolism by autocrine, paracrine, or endocrine action and were reportedly suggested as “exercise factors” that can improve the brain function. However, several aspects remain to be elucidated, namely the specific activities of myokines related to the whole-body metabolism or brain function, the mechanisms of regulation of other organs or cells, the sources of “exercise factors” that regulate brain function, and their mechanisms of interaction with non-muscle organs. In this paper, we present the physiological functions of myokines secreted by exercise, including regulation of the whole-body metabolism by interaction with other organs and adaptation of skeletal muscles to exercise. In addition, we discuss the functions of myokines that possibly contribute to exercise-induced improvement of brain function. Among several myokines, brain-derived neurotrophic factor (BDNF) is the most studied myokine that regulates adult neurogenesis and synaptic plasticity. However, the source of circulating BDNF and its upstream effector, insulin-like growth factor (IGF-1), and irisin and the effect size of peripheral BDNF, irisin, and IGF-1 released after exercise should be further investigated. Recently, cathepsin B has been reported to be secreted from skeletal muscles and upregulate BDNF following exercise, which was associated with improved cognitive function. We reviewed the level of evidence for the effect of myokine on the brain function. Level of evidence for the association of the change in circulating myokine following exercise and improvement of neuropsychiatric function is lower than the level of evidence for the benefit of exercise on the brain. Therefore, more clinical evidences for the association of myokine release after exercise and their effect on the brain function are required. Finally, we discuss the effect size of the action of myokines on cognitive benefits of exercise, in addition to other contributors, such as improvement of the cardiovascular system or the effect of “exercise factors” released from non-muscle organs, particularly in patients with sarcopenia.
In today’s world, renewable energy sources are increasingly integrated with nonrenewable energy sources into electric grids and pose new challenges because of their intermittent and variable nature. ...Energy prediction using soft-computing techniques plays a vital role in addressing these challenges. As electricity consumption is closely linked to other energy sources such as natural gas and oil, forecasting electricity consumption is essential for making national energy policies. In this paper, we utilize various data mining techniques, including preprocessing historical load data and the load time series’s characteristics. We analyzed the power consumption trends from renewable energy sources and nonrenewable energy sources and combined them. A novel machine learning-based hybrid approach, combining multilayer perceptron (MLP), support vector regression (SVR), and CatBoost, is proposed in this paper for power forecasting. A thorough comparison is made, taking into account the results obtained using other prediction methods.