Geomagnetically trapped antiprotons Selesnick, R. S.; Looper, M. D.; Mewaldt, R. A. ...
Geophysical research letters,
October 2007, Letnik:
34, Številka:
20
Journal Article
Recenzirano
The distribution of geomagnetically trapped antiprotons from decay of cosmic ray albedo antineutrons is described theoretically. The calculation includes ionization energy loss, inelastic nuclear ...scattering and annihilation, radial diffusion, and solar cycle and geomagnetic secular variations. The trapped antiproton intensity at satellite altitudes is predicted to be significantly higher than the interplanetary cosmic ray antiproton intensity.
The solar particle event observed at STEREO
Ahead
on 18 August 2010 displayed a rich variety of behavior in the particle anisotropies. Sectored rates measured by the
Low Energy Telescope
(LET) on ...STEREO showed very large bidirectional anisotropies in 4 – 6 MeV protons for the first ∼ 17 hours of the event while inside a magnetic cloud, with intensities along the field direction several hundred to nearly 1000 times greater than those perpendicular to the field. At the trailing end of the cloud, the protons became isotropic and their spectrum hardened slightly, while the He/H abundance ratio plunged by a factor of approximately four for about four hours. Associated with the arrival of a shock on 20 August was a series of brief (< 10 minute duration) intensity increases (commonly called “shock spikes”) with relatively narrow angular distributions (∼ 45
∘
FWHM), followed by an abrupt decrease in particle intensities at the shock itself and a reversal of the proton flow to a direction toward the Sun and away from the receding shock. We discuss the STEREO/LET observations of this interesting event in the context of other observations reported in the literature.
Context.
In 2020 May-June, six solar energetic ion events were observed by the Parker Solar Probe/IS⊙IS instrument suite at ≈0.35 AU from the Sun. From standard velocity-dispersion analysis, the ...apparent ion path length is ≈0.625 AU at the onset of each event.
Aims.
We develop a formalism for estimating the path length of random-walking magnetic field lines to explain why the apparent ion path length at an event onset greatly exceeds the radial distance from the Sun for these events.
Methods.
We developed analytical estimates of the average increase in path length of random-walking magnetic field lines, relative to the unperturbed mean field. Monte Carlo simulations of field line and particle trajectories in a model of solar wind turbulence were used to validate the formalism and study the path lengths of particle guiding-center and full-orbital trajectories. The formalism was implemented in a global solar wind model, and the results are compared with ion path lengths inferred from IS⊙IS observations.
Results.
Both a simple estimate and a rigorous theoretical formulation are obtained for field-lines’ path length increase as a function of path length along the large-scale field. From simulated field line and particle trajectories, we find that particle guiding centers can have path lengths somewhat shorter than the average field line path length, while particle orbits can have substantially longer path lengths due to their gyromotion with a nonzero effective pitch angle.
Conclusions.
The long apparent path length during these solar energetic ion events can be explained by (1) a magnetic field line path length increase due to the field line random walk and (2) particle transport about the guiding center with a nonzero effective pitch angle due to pitch angle scattering. Our formalism for computing the magnetic field line path length, accounting for turbulent fluctuations, may be useful for application to solar particle transport in general.
Context . The solar energetic particle analysis platform for the inner heliosphere (SERPENTINE) project, funded through the H2020-SPACE-2020 call of the European Union’s Horizon 2020 framework ...program, employs measurements of the new inner heliospheric spacecraft fleet to address several outstanding questions on the origin of solar energetic particle (SEP) events. The data products of SERPENTINE include event catalogs, which are provided to the scientific community. Aims . In this paper, we present SERPENTINE’s new multi-spacecraft SEP event catalog for events observed in solar cycle 25. Observations from five different viewpoints are utilized, provided by Solar Orbiter, Parker Solar Probe, STEREO A, Bepi Colombo, and the near-Earth spacecraft Wind and SOHO. The catalog contains key SEP parameters for 25–40 MeV protons, ~1 MeV electrons, and ~100 keV electrons. Furthermore, basic parameters of associated flares and type II radio bursts are listed, as are the coordinates of the observer and solar source locations. Methods . An event is included in the catalog if at least two spacecraft detect a significant proton event with energies of 25–40 MeV. The SEP onset times were determined using the Poisson-CUSUM method. The SEP peak times and intensities refer to the global intensity maximum. If different viewing directions are available, we used the one with the earliest onset for the onset determination and the one with the highest peak intensity for the peak identification. We furthermore aimed to use a high time resolution to provide the most accurate event times. Therefore, we opted to use a 1-min time resolution, and more time averaging of the SEP intensity data was only applied if necessary to determine clean event onsets and peaks. Associated flares were identified using observations from near Earth and Solar Orbiter. Associated type II radio bursts were determined from ground-based observations in the metric frequency range and from spacecraft observations in the decametric range. Results . The current version of the catalog contains 45 multi-spacecraft events observed in the period from November 2020 until May 2023, of which 13 events were found to be widespread (observed at longitudes separated by at least 80° from the associated flare location) and four could be classified as narrow-spread events (not observed at longitudes separated by at least 80° from the associated flare location). Using X-ray observations by GOES/XRS and Solar Orbiter/STIX, we were able to identify the associated flare in all but four events. Using ground-based and space-borne radio observations, we found an associated type II radio burst for 40 events. In total, the catalog contains 142 single event observations, of which 20 (45) have been observed at radial distances below 0.6 AU (0.8 AU). It is anticipated that the catalog will be extended in the future.
Energetic electrons of Jovian origin have been observed for decades throughout the heliosphere, as far as 11 astronomical units (au), and as close as 0.5 au, from the Sun. The treatment of Jupiter as ...a continuously emitting point source of energetic electrons has made Jovian electrons a valuable tool in the study of energetic electron transport within the heliosphere. We present observations of Jovian electrons measured by the EPI-Hi instrument in the Integrated Science Investigation of the Sun (IS ʘ IS) instrument suite on Parker Solar Probe at distances within 0.5 au of the Sun. These are the closest measurements of Jovian electrons to the Sun, providing a new opportunity to study the propagation and transport of energetic electrons to the inner heliosphere. We also find periods of nominal connection between the spacecraft and Jupiter in which expected Jovian electron enhancements are absent. Several explanations for these absent events are explored, including stream interaction regions (SIRs) between Jupiter and Parker Solar Probe and the spacecraft lying on the opposite side of the heliospheric current sheet from Jupiter, both of which could impede the flow of the electrons. These observations provide an opportunity to gain a greater insight into electron transport through a previously unexplored region of the inner heliosphere.
Context.
Silicon solid-state detectors are commonly used for measuring the specific ionization, d
E
∕d
x
, in instruments designed for identifying energetic nuclei using the d
E
∕d
x
versus total ...energy technique in space and in the laboratory. The energy threshold and species resolution of the technique strongly depend on the thickness and thickness uniformity of these detectors.
Aims.
Research has been carried out to develop processes for fabricating detectors that are thinner than 15
μ
m, that have a thickness uniformity better than 0.2
μ
m over cm
2
areas, and that are rugged enough to survive the acoustic and vibration environments of a spacecraft launch.
Methods.
Silicon-on-insulator wafers that have a device layer of the desired detector thickness supported by a thick handle layer were used as starting material. Standard processing techniques were used to fabricate detectors on the device layer, and the underlying handle-layer material was etched away leaving a thin, uniform detector surrounded by a thick, supporting frame.
Results.
Detectors as thin as 12
μ
m were fabricated in two laboratories and successfully subjected to environmental and performance tests. Two detector designs were used in the High-energy Energetic Particles Instrument, which is part of the Integrated Science Investigation of the Sun instrument suite on NASA’s Parker Solar Probe spacecraft. These detectors have been performing well for more than two years in space.
Conclusions.
Thin silicon detectors in d
E
∕d
x
versus total energy instruments enable the identification of nuclei with energies down to ~1 MeV nuc
−1
. This research suggests that detectors at least a factor of two thinner should be achievable using this fabrication technique.
Context. In 2020 May-June, six solar energetic ion events were observed by the Parker Solar Probe/IS⊙IS instrument suite at ≈0.35 AU from the Sun. From standard velocity-dispersion analysis, the ...apparent ion path length is ≈0.625 AU at the onset of each event. Aims. We develop a formalism for estimating the path length of random-walking magnetic field lines to explain why the apparent ion path length at an event onset greatly exceeds the radial distance from the Sun for these events. Methods. We developed analytical estimates of the average increase in path length of random-walking magnetic field lines, relative to the unperturbed mean field. Monte Carlo simulations of field line and particle trajectories in a model of solar wind turbulence were used to validate the formalism and study the path lengths of particle guiding-center and full-orbital trajectories. The formalism was implemented in a global solar wind model, and the results are compared with ion path lengths inferred from IS⊙IS observations. Results. Both a simple estimate and a rigorous theoretical formulation are obtained for field-lines’ path length increase as a function of path length along the large-scale field. From simulated field line and particle trajectories, we find that particle guiding centers can have path lengths somewhat shorter than the average field line path length, while particle orbits can have substantially longer path lengths due to their gyromotion with a nonzero effective pitch angle. Conclusions. The long apparent path length during these solar energetic ion events can be explained by (1) a magnetic field line path length increase due to the field line random walk and (2) particle transport about the guiding center with a nonzero effective pitch angle due to pitch angle scattering. Our formalism for computing the magnetic field line path length, accounting for turbulent fluctuations, may be useful for application to solar particle transport in general.
Context. Silicon solid-state detectors are commonly used for measuring the specific ionization, dE∕dx, in instruments designed for identifying energetic nuclei using the dE∕dx versus total energy ...technique in space and in the laboratory. The energy threshold and species resolution of the technique strongly depend on the thickness and thickness uniformity of these detectors. Aims. Research has been carried out to develop processes for fabricating detectors that are thinner than 15 μm, that have a thickness uniformity better than 0.2 μm over cm2 areas, and that are rugged enough to survive the acoustic and vibration environments of a spacecraft launch. Methods. Silicon-on-insulator wafers that have a device layer of the desired detector thickness supported by a thick handle layer were used as starting material. Standard processing techniques were used to fabricate detectors on the device layer, and the underlying handle-layer material was etched away leaving a thin, uniform detector surrounded by a thick, supporting frame. Results. Detectors as thin as 12 μm were fabricated in two laboratories and successfully subjected to environmental and performance tests. Two detector designs were used in the High-energy Energetic Particles Instrument, which is part of the Integrated Science Investigation of the Sun instrument suite on NASA’s Parker Solar Probe spacecraft. These detectors have been performing well for more than two years in space. Conclusions. Thin silicon detectors in d E∕dx versus total energy instruments enable the identification of nuclei with energies down to ~1 MeV nuc−1. This research suggests that detectors at least a factor of two thinner should be achievable using this fabrication technique.
PDF
