Compared with stainless steel and Co–Cr‐based alloys, Ti and its alloys are widely used as biomedical implants due to many fascinating properties, such as superior mechanical properties, strong ...corrosion resistance, and excellent biocompatibility. After briefly introducing several most commonly used biomedical materials, this article reviews the recent development in Ti alloys and their biomedical applications, especially the low‐modulus β‐type Ti alloys and their design methods. This review also systemically investigates the recently attractive progress in preparation of biomedical Ti alloys, including additive manufacturing, porous powder metallurgy, and severe plastic deformation, applied in the manufacturing and the influenced microstructures and properties. Nevertheless, there are still some problems with the long‐term performance of Ti alloys, and therefore several surface modification methods are reviewed to further improve their biological activity, wear resistance, and corrosion resistance. Finally, the biocompatibility of Ti and its alloys is concluded. Summarizing the findings from literature, future prediction is also conducted.
This paper reviews the recent development in Ti alloys and their biomedical applications, including additive manufacturing, porous powder metallurgy, and severe plastic deformation applied in the manufacturing and the influenced microstructures and properties. Nevertheless, some problems exist in long‐term performance of Ti alloys. Hence, several surface modification methods are reviewed to improve their biological activity, wear resistance, and corrosion resistance.
The oxygen evolution reaction (OER) is an important half reaction in many energy conversion and storage techniques. However, the development of a low‐cost easy‐prepared OER electrocatalyst with high ...mass activity and rapid kinetics is still challenging. Herein, we report the facile deposition of tannin‐NiFe (TANF) complex film on carbon fiber paper (CP) as a highly efficient OER electrocatalyst. TANF gives rapid OER reaction kinetics with a very small Tafel slope of 28 mV dec−1. The mass activity of TANF reaches 9.17×103 Ag−1 at an overpotential of 300 mV, which is nearly 200‐times larger than that of NiFe double layered hydroxide. Furthermore, tannic acid in TANF can be electrochemically extracted under anodic potential, leaving the inorganic composite NixFe1−xOyHz as the OER‐active species. This work may provide a guide to probing the electrochemical transformation and investigating the reactive species of other metal–organic complexes as heterogeneous electrocatalysts.
Get it down on paper: A tannin‐NiFe complex (TANF) ultrathin film is deposited on carbon fiber paper by coordinating tannin with Ni and Fe ions to give an efficient oxygen evolution reaction (OER) electrocatalyst with high mass activity and rapid kinetics. The inorganic species NixFe1−xOyHz is shown to be the OER‐active species.
Lattice structures, which are also known as architected cellular structures, have been applied in various industrial sectors, owing to their fascinated performances, such as low elastic modulus, high ...stiffness-to-weight ratio, low thermal expansion coefficient, and large specific surface area. The lattice structures fabricated by conventional manufacturing technologies always involve complicated process control, additional assembly steps, or other uncontrollable factors. Furthermore, limited types of unit cells can be used to construct lattice structures when using conventional processes. Fortunately, additive manufacturing technology, based on a layer-by-layer process from computer-aided design models, demonstrates the unique capability and flexibility and provides an ideal platform in manufacturing complex components like lattice structures, resulting in an effective reduction in the processing time to actual application and minimum of material waste. Therefore, additive manufacturing relieves the constraint of structure design and provides accurate fabrication for lattice structures with good quality. This work systematically presents an overview of conventional manufacturing methods and novel additive manufacturing technologies for metallic lattice structures. Afterward, the design, optimization, a variety of properties, and applications of metallic lattice structures produced by additive manufacturing are elaborated. By summarizing state-of-the-art progress of the additively manufactured metallic lattice structures, limitations and future perspectives are also discussed.
Floral homeotic transcription factors (TFs) act in a combinatorial manner to specify the organ identities in the flower. However, the architecture and the function of the gene regulatory network ...(GRN) controlling floral organ specification is still poorly understood. In particular, the interconnections of homeotic TFs, microRNAs (miRNAs) and other factors controlling organ initiation and growth have not been studied systematically so far. Here, using a combination of genome-wide TF binding, mRNA and miRNA expression data, we reconstruct the dynamic GRN controlling floral meristem development and organ differentiation. We identify prevalent feed-forward loops (FFLs) mediated by floral homeotic TFs and miRNAs that regulate common targets. Experimental validation of a coherent FFL shows that petal size is controlled by the SEPALLATA3-regulated miR319/TCP4 module. We further show that combinatorial DNA-binding of homeotic factors and selected other TFs is predictive of organ-specific patterns of gene expression. Our results provide a valuable resource for studying molecular regulatory processes underlying floral organ specification in plants.
Thanks to a considerable number of fascinating properties, titanium (Ti) and Ti alloys play important roles in a variety of industrial sectors. However, Ti and Ti alloys could not satisfy all ...industrial requirements; the degradation of Ti and Ti alloys always commences on their surfaces in service, which declines the performances of Ti workpieces. Therefore, with aim to further improve their mechanical, corrosion and biological properties, surface modification is often required for Ti and Ti alloys. This article reviews the technologies and recent developments of surface‐modification methods with respect to Ti and Ti alloys, including mechanical, physical, chemical, and biochemical technologies. Conventional methods have limited improvement in the properties and/or restriction on the geometry of workpieces. Therefore, many advanced surface‐modification technologies have emerged in recent decades. New methods make Ti and Ti alloys have better performance and extended applications. With requirement of high surface properties in future. Understanding the mechanism in various surface‐modification methods, combining the advantages of current technologies and developing new coating materials with high performance are required urgently. As such, incorporation of different surface‐modification technologies with high‐performance modified layers may be the mainstream of surface modifications for Ti and Ti alloys.
The technologies and recent development of surface‐modification methods for titanium (Ti) and Ti alloys are reviewed. Such technologies have expanded the applications of Ti and Ti alloys in the past and present due to their enhanced surface properties. Likewise, the mainstream of surface modifications for Ti and Ti alloys in the future is also discussed.
A cationic cobalt(III)‐catalyzed direct CH amidation of unactivated (hetero)arenes and alkenes by using 1,4,2‐dioxazol‐5‐ones as the amidating reagent has been developed. This transformation ...proceeds efficiently under external oxidant‐free conditions with a broad substrate scope. Moreover, 6‐arylpurine compounds, which often exhibit high potency in antimycobacterial, cytostatic, and anti‐HCV activities, can be smoothly amidated, thus offering a mild protocol for their late stage functionalization.
Operationally simple: A cationic cobalt(III) catalyzed direct CH amidation of unactivated (hetero)arenes and alkenes has been developed (see scheme; DCE=1,2‐dichloroethane). This reaction proceeded efficiently under external oxidant‐free conditions with ample substrate scope, as well as excellent chemo‐ and regioselectivity. Moreover, 6‐arylpurine compounds, which often exhibit important biological activities, can be smoothly modified by this mild protocol.
For electrocatalytic water splitting, the sluggish anodic oxygen evolution reaction (OER) restricts the cathodic hydrogen evolution reaction (HER). Therefore, developing an alternative anodic ...reaction with accelerating kinetics to produce value‐added chemicals, especially coupled with HER, is of great importance. Now, a thermodynamically more favorable primary amine (−CH2−NH2) electrooxidation catalyzed by NiSe nanorod arrays in water is reported to replace OER for enhancing HER. The increased H2 production can be obtained at cathode; meanwhile, a variety of aromatic and aliphatic primary amines are selectively electrooxidized to nitriles with good yields at the anode. Mechanistic investigations suggest that NiII/NiIII may serve as the redox active species for the primary amines transformation. Hydrophobic nitrile products can readily escape from aqueous electrolyte/electrode interface, avoiding the deactivation of the catalyst and thus contributing to continuous gram‐scale synthesis.
Substitution, higher efficiency: Hydrogen (H2) production is achieved at lower potential by replacing the OER with the electrooxidation of primary amines in water. The hydrophilic primary amines at the NiSe anode can be converted oxidant‐free into the corresponding hydrophobic nitriles with high yields (>93 %) and selectivity. The process is easily scalable and free of organic solvent, and the product easily isolable.
Pooling plays an important role in generating a discriminative video representation. In this paper, we propose a new semantic pooling approach for challenging event analysis tasks (e.g., event ...detection, recognition, and recounting) in long untrimmed Internet videos, especially when only a few shots/segments are relevant to the event of interest while many other shots are irrelevant or even misleading. The commonly adopted pooling strategies aggregate the shots indifferently in one way or another, resulting in a great loss of information. Instead, in this work we first define a novel notion of semantic saliency that assesses the relevance of each shot with the event of interest. We then prioritize the shots according to their saliency scores since shots that are semantically more salient are expected to contribute more to the final event analysis. Next, we propose a new isotonic regularizer that is able to exploit the constructed semantic ordering information. The resulting nearly-isotonic support vector machine classifier exhibits higher discriminative power in event analysis tasks. Computationally, we develop an efficient implementation using the proximal gradient algorithm, and we prove new and closed-form proximal steps. We conduct extensive experiments on three real-world video datasets and achieve promising improvements.
β-type titanium (Ti) alloys have attracted a lot of attention as novel biomedical materials in the past decades due to their low elastic moduli and good biocompatibility. This article provides a ...broad and extensive review of β-type Ti alloys in terms of alloy design, preparation methods, mechanical properties, corrosion behavior, and biocompatibility. After briefly introducing the development of Ti and Ti alloys for biomedical applications, this article reviews the design of β-type Ti alloys from the perspective of the molybdenum equivalency (Moeq) method and DV-Xα molecular orbital method. Based on these methods, a considerable number of β-type Ti alloys are developed. Although β-type Ti alloys have lower elastic moduli compared with other types of Ti alloys, they still possess higher elastic moduli than human bones. Therefore, porous β-type Ti alloys with declined elastic modulus have been developed by some preparation methods, such as powder metallurgy, additive manufacture and so on. As reviewed, β-type Ti alloys have comparable or even better mechanical properties, corrosion behavior, and biocompatibility compared with other types of Ti alloys. Hence, β-type Ti alloys are the more suitable materials used as implant materials. However, there are still some problems with β-type Ti alloys, such as biological inertness. As such, summarizing the findings from the current literature, suggestions forβ-type Ti alloys with bioactive coatings are proposed for the future development.
Perfluorooctane sulfonate (PFOS) is a prominent perfluorinated compound commonly found in the environment, known to pose various risks to human health. However, the removal of PFOS presents ...significant challenges, primarily due to the limited discovery of bacteria capable of effectively degrading PFOS. Moreover, single degradation bacteria often encounter obstacles in individual cultivation and the breakdown of complex pollutants. In contrast, microbial consortia have shown promise in pollutant degradation. This study employed a continuous enrichment method, combined with multiple co-metabolic substrates, to investigate a microbial consortium with the potential for PFOS degradation. By employing this methodology, we effectively identified a microbial consortium that demonstrated the capacity to reduce PFOS when exposed to an optimal concentration of methanol. The consortium predominantly comprised of Hyphomicrobium species (46.7%) along with unclassified microorganisms (53.0%). Over a duration of 20 days, the PFOS concentration exhibited a notable decrease of 56.7% in comparison to the initial level, while considering the exclusion of adsorption effects. Furthermore, by comparing the predicted metabolic pathways of the microbial consortium with the genome of a known chloromethane-degrading bacterium, Hyphomicrobium sp. MC1, using the KEGG database, we observed distinct variations in the metabolic pathways, suggesting the potential role of the unclassified microorganisms. These findings underscore the potential effectiveness of a "top-down" functional microbial screening approach in the degradation of stubborn pollutants.
PDF
