We describe, for the first time the use of hydrogel-forming microneedle (MN) arrays for minimally-invasive extraction and quantification of drug substances and glucose from skin in vitro and in vivo. ...MN prepared from aqueous blends of hydrolysed poly(methyl-vinylether-co-maleic anhydride) (11.1% w/w) and poly(ethyleneglycol) 10,000 daltons (5.6% w/w) and crosslinked by esterification swelled upon skin insertion by uptake of fluid. Post-removal, theophylline and caffeine were extracted from MN and determined using HPLC, with glucose quantified using a proprietary kit. In vitro studies using excised neonatal porcine skin bathed on the underside by physiologically-relevant analyte concentrations showed rapid (5 min) analyte uptake. For example, mean concentrations of 0.16 μg/mL and 0.85 μg/mL, respectively, were detected for the lowest (5 μg/mL) and highest (35 μg/mL) Franz cell concentrations of theophylline after 5 min insertion. A mean concentration of 0.10 μg/mL was obtained by extraction of MN inserted for 5 min into skin bathed with 5 μg/mL caffeine, while the mean concentration obtained by extraction of MN inserted into skin bathed with 15 μg/mL caffeine was 0.33 μg/mL. The mean detected glucose concentration after 5 min insertion into skin bathed with 4 mmol/L was 19.46 nmol/L. The highest theophylline concentration detected following extraction from a hydrogel-forming MN inserted for 1 h into the skin of a rat dosed orally with 10 mg/kg was of 0.363 μg/mL, whilst a maximum concentration of 0.063 μg/mL was detected following extraction from a MN inserted for 1 h into the skin of a rat dosed with 5 mg/kg theophylline. In human volunteers, the highest mean concentration of caffeine detected using MN was 91.31 μg/mL over the period from 1 to 2 h post-consumption of 100 mg Proplus® tablets. The highest mean blood glucose level was 7.89 nmol/L detected 1 h following ingestion of 75 g of glucose, while the highest mean glucose concentration extracted from MN was 4.29 nmol/L, detected after 3 hours skin insertion in human volunteers. Whilst not directly correlated, concentrations extracted from MN were clearly indicative of trends in blood in both rats and human volunteers. This work strongly illustrates the potential of hydrogel-forming MN in minimally-invasive patient monitoring and diagnosis. Further studies are now ongoing to reduce clinical insertion times and develop mathematical algorithms enabling determination of blood levels directly from MN measurements.
Engineered cocrystals offer an alternative solid drug form with tailored physicochemical properties. Interestingly, although cocrystals provide many new possibilities, they also present new ...challenges, particularly in regard to their design and large-scale manufacture. Current literature has primarily focused on the preparation and characterization of novel cocrystals typically containing only the drug and coformer, leaving the subsequent formulation less explored. In this paper we propose, for the first time, the use of hot melt extrusion for the mechanochemical synthesis of pharmaceutical cocrystals in the presence of a meltable binder. In this approach, we examine excipients that are amenable to hot melt extrusion, forming a suspension of cocrystal particulates embedded in a pharmaceutical matrix. Using ibuprofen and isonicotinamide as a model cocrystal reagent pair, formulations extruded with a small molecular matrix carrier (xylitol) were examined to be intimate mixtures wherein the newly formed cocrystal particulates were physically suspended in a matrix. With respect to formulations extruded using polymeric carriers (Soluplus and Eudragit EPO, respectively), however, there was no evidence within PXRD patterns of either crystalline ibuprofen or the cocrystal. Importantly, it was established in this study that an appropriate carrier for a cocrystal reagent pair during HME processing should satisfy certain criteria including limited interaction with parent reagents and cocrystal product, processing temperature sufficiently lower than the onset of cocrystal Tm, low melt viscosity, and rapid solidification upon cooling.
Display omitted
Amorphous solid dispersion (ASD) is a formulation strategy extensively used to enhance the bioavailability of poorly water soluble drugs. Despite this, they are limited by various ...factors such as limited drug loading, poor stability, drug-excipient miscibility and the choice of process platforms. In this work, we have developed a strategy for the manufacture of high drug loaded ASD (HDASD) using hot-melt extrusion (HME) based platform. Three drug-polymer combinations, indomethacin-Eudragit®E, naproxen-Eudragit®E and ibuprofen-Eudragit®E, were used as the model systems. The design spaces were predicted through Flory-Huggins based theory, and the selected HDASDs at pre-defined conditions were manufactured using HME and quench-cooled melt methods. These HDASD systems were also extensively characterised via small angle/wide angle x-ray scattering, differential scanning calorimetry, Infrared and Raman spectroscopy and atomic force microscopy. It was verified that HDASDs were successfully produced via HME platform at the pre-defined conditions, with maximum drug loadings of 0.65, 0.70 and 0.60 w/w for drug indomethacin, ibuprofen and naproxen respectively. Enhanced physical stability was further confirmed by high humidity (95%RH) storage stability studies. Through this work, we have demonstrated that by the implementation of predictive thermodynamic modelling, HDASD formulation design can be integrated into the HME process design to ensure the desired quality of the final dosage form.
Display omitted
Microwave-induced in situ amorphization is a novel technology for preparing amorphous solid dispersions (ASDs) to address the challenges of their long-term physical stability and ...downstream processing. To date, only few types of dielectric materials have been reported for microwave-induced in situ amorphization, which restricted the extensive research of this technology. This study aimed to investigate the feasibility and mechanisms of utilizing the non-ionic surfactants, i.e. Kollisolv P124, Kolliphor RH40, D-ɑ-tocopheryl polyethylene glycol succinate (TPGS), Tween (T) 60 (T60), T65, T80 and T85, as plasticizers to facilitate microwave-induced in situ amorphization. It was found that the successful application of surfactants could be related with their low Tm, low Mw and high HLB. Kolliphor RH40 was selected as a typical surfactant due to its excellent dielectric heating ability, plasticizing effect and solubilizing effect when facilitating amorphization. Then, the dissolution-mediated in situ amorphization mechanism was investigated and intuitively demonstrated. For the most promising formulation, i.e. microwaved systems with Korlliphor RH40 at 1.5 (w/w) plasticizer/polymer ratio, a complete and fast in vitro dissolution was observed relative to the untreated systems. In conclusion, non-ionic surfactants had the potential to facilitate microwave-induced in situ amorphization, which provided a new direction in the formulation designation for microwave-able systems.
Room temperature atmospheric pressure microplasma (APM) was deployed for the first time for the in situ synthesis of antibacterial silver nanoparticle/chitosan (AgNP/CS) nanocomposites. The plasma ...induced liquid chemistry plays a role in the in situ formation of AgNP, the size distribution of which depends on the silver salt precursor concentration. The microplasma process has also simultaneously tailored the physical properties of the composites, through molecular chain scission and formation of physically crosslinked polymer network. The formation of AgNP within the in situ modified chitosan has led to nanocomposites with overall improved mechanical properties and better stability in simulated body fluid. Our plasma synthesized AgNP/CS nanocomposites also demonstrate effective antibacterial properties against E. coli and S. aureus bacterial strains, showing their promise in potential antimicrobial applications.
2D arrays of metal nanoparticles formed at liquid–liquid interfaces have been fixed in situ to a thin polymer support to create freestanding large (cm2) composite films where the particles remain ...exposed rather than being trapped within the polymer. Applications of these flexible robust 2D nanoparticle arrays as sensors, thin film conductors, antimicrobial coatings, and dip‐in catalysts are shown.
Display omitted
Moisture was frequently used as dielectric heating source in classical microwave-able systems to facilitate microwave-induced in situ amorphization, however such systems may face the ...potential of drug hydrolysis. In this study, solid thermolytic salts were proposed to function as moisture substitutes and their feasibility and impacts on microwave-induced in situ amorphization were investigated. It was found that NH4HCO3 was a promising solid alkaline salt to facilitate both microwave-induced in situ amorphization and in situ salt formation of acidic indomethacin (IND). Moreover, it could improve the chemical stability of the drug and the dissolution performance of compacts relative to classical moisture-based compacts upon microwaving. Further mechanistic study suggested that the in situ amorphization occurred prior to the in situ salt formation, especially in formulations with low drug loadings and high solid salt mass ratios. For compacts with low polymer ratios, in situ salt formation took place subsequently, where the previously amorphized IND within compacts could interact with the NH3 gas produced in situ by the decomposition of NH4HCO3 and form the ammonium IND salt. Microwaving time showed great impacts on the decomposition of NH4HCO3 and the in situ generation of water and NH3, which indirectly affected the amorphization and salt formation of IND. In comparison to the moisture-based systems, the NH4HCO3-based system showed a number of advantages, including the reduced potential of IND hydrolysis due to the absence of absorbed moisture, a wider category of applicable polymeric carriers other than hygroscopic polymers, and an increase in drug loading up to 50% (w/w).
Herein we present a supramolecular (delayed luminescent) Eu(III)-based pH-responsive probe/sensor with the ability to detect the urease-mediated hydrolysis of urea in aqueous solution. A series of ...photophysical titrations show this Eu(III) chelate behaves as an "on-off" luminescent switching probe, with its luminescence being quenched upon urea being enzymatically converted into ammonia and carbon dioxide. Calculation of the rate constant (k) and activation energy (E
) for this hydrolysis reaction are detailed; the results demonstrate a direct observation of enzymatic activity in solution by the sensor. The potential application of this probe in detecting the onset of catheter-associated urinary tract infections (CAUTIs) is also demonstrated by incorporating 1.Eu into water-permeable hydrogels that can be utilized as an alternative coating for catheters.
PDF
