Precisely engineered magnetic nanoparticles (MNPs) have been widely explored for applications including theragnostic platforms, drug delivery systems, biomaterial/device coatings, tissue engineering ...scaffolds, performance-enhanced therapeutic alternatives, and even in SARS-CoV-2 detection strips. Such popularity is due to their unique, challenging, and tailorable physicochemical/magnetic properties. Given the wide biomedical-related potential applications of MNPs, significant achievements have been reached and published (exponentially) in the last five years, both in synthesis and application tailoring. Within this review, and in addition to essential works in this field, we have focused on the latest representative reports regarding the biomedical use of MNPs including characteristics related to their oriented synthesis, tailored geometry, and designed multibiofunctionality. Further, actual trends, needs, and limitations of magnetic-based nanostructures for biomedical applications will also be discussed.
•Classification of scheduling problems.•Summary of industrial requirements for scheduling.•Review of existing scheduling optimization methods, including heuristics, metaheuristics and constraint ...programming.•Lessons learned and success stories on real industrial scheduling implementations.•Future challenges for industry in the area of planning and scheduling.
This paper gives a review on existing scheduling methodologies developed for process industries. Above all, the aim of the paper is to focus on the industrial aspects of scheduling and discuss the main characteristics, including strengths and weaknesses of the presented approaches. It is claimed that optimization tools of today can effectively support the plant level production. However there is still clear potential for improvements, especially in transferring academic results into industry. For instance, usability, interfacing and integration are some aspects discussed in the paper. After the introduction and problem classification, the paper discusses some lessons learned from industry, provides an overview of models and methods and concludes with general guidelines and examples on the modeling and solution of industrial problems.
Ischemic stroke causes brain inflammation, which we postulate may result in lung damage. Several studies have focused on stroke-induced immunosuppression and lung infection; however, the possibility ...that strokes may trigger lung inflammation has been overlooked. We hypothesized that even focal ischemic stroke might induce acute systemic and pulmonary inflammation, thus altering respiratory parameters, lung tissue integrity, and alveolar macrophage behavior.
Forty-eight Wistar rats were randomly assigned to ischemic stroke (Stroke) or sham surgery (Sham). Lung function, histology, and inflammation in the lung, brain, bronchoalveolar lavage fluid (BALF), and circulating plasma were evaluated at 24 h. In vitro, alveolar macrophages from naïve rats (unstimulated) were exposed to serum or BALF from Sham or Stroke animals to elucidate possible mechanisms underlying alterations in alveolar macrophage phagocytic capability. Alveolar macrophages and epithelial and endothelial cells of Sham and Stroke animals were also isolated for evaluation of mRNA expression of interleukin (IL)-6 and tumor necrosis factor (TNF)-α.
Twenty-four hours following ischemic stroke, the tidal volume, expiratory time, and mean inspiratory flow were increased. Compared to Sham animals, the respiratory rate and duty cycle during spontaneous breathing were reduced, but this did not affect lung mechanics during mechanical ventilation. Lungs from Stroke animals showed clear evidence of increased diffuse alveolar damage, pulmonary edema, and inflammation markers. This was associated with an increase in ultrastructural damage, as evidenced by injury to type 2 pneumocytes and endothelial cells, cellular infiltration, and enlarged basement membrane thickness. Protein levels of proinflammatory mediators were documented in the lung, brain, and plasma (TNF-α and IL-6) and in BALF (TNF-α). The phagocytic ability of macrophages was significantly reduced. Unstimulated macrophages isolated from naïve rats only upregulated expression of TNF-α and IL-6 following exposure to serum from Stroke rats. Exposure to BALF from Stroke or Sham animals did not change alveolar macrophage behavior, or gene expression of TNF-α and IL-6. IL-6 expression was increased in macrophages and endothelial cells from Stroke animals.
In rats, focal ischemic stroke is associated with brain-lung crosstalk, leading to increased pulmonary damage and inflammation, as well as reduced alveolar macrophage phagocytic capability, which seems to be promoted by systemic inflammation.
This ex vivo study aimed to evaluate the shaping abilities and preservation of dentin with traditional and modern instruments after using sizes 25 and 40 in oval canals of mandibular incisors with ...conservative access.
Thirty mandibular incisors with single straight oval canals were selected and assigned into 2 groups (n = 15) according to the instrument system used during preparation, Slim Shaper (SS) plus Apical Shaper (AS) and Protaper Gold (PG). The samples were subjected to micro-computed tomography before and after preparation with sizes 25 and 40. The shaping parameters evaluated included canal volume and surface area, amount of unprepared root canal walls, and reduction in pericervical dentin.
Canal volume and surface area were significantly increased after enlargement with each instrument size (P < .01). The percentage of unprepared areas showed a significant intragroup decrease after using PG F2 and F4 or SS 3 and AS (P < .05). Intergroup comparison showed no significant differences. Pericervical dentin was reduced in all groups. The intragroup comparison only revealed a significant reduction (P < .01) between PG F2 and F4. In addition, a significant decrease in pericervical dentin (P < .05) was observed between PG F4 40/.06 and AS 40/.03. No significant differences were observed between PG F2 25/.08 and SS 3 25/.04.
Increasing the instrumentation size from 25 to 40 significantly reduces the percentage of unprepared areas regardless of the system used. In addition, using a modern system with a regressive taper allows the maintenance of pericervical dentin without compromising shaping efficacy in the apical third of the mandibular incisors with oval canals and conservative access.
Here, we report on the electrospinning of poly(vinylidene difluoride-co-trifluoroethylene) (P(VDF-TrFE)) copolymer fibrous membranes decorated with titanium dioxide/graphene oxide (TiO₂/GO). The ...presence of the TiO₂/GO increases the photocatalytic efficiency of the nanocomposite membrane towards the degradation of methylene blue (MB) when compared with the membranes prepared with naked TiO₂, in UV and particularly in the visible range. Even a low content (3 %, w/w) of TiO₂/GO in the fibers yields excellent photocatalytic performance by degrading ~100 % of a MB solution after 90 min of visible light exposure. This may be attributed to a rapid electron transport and the delayed recombination of electron–hole pairs due to improved ionic interaction between titanium and carbon combined with the advantageous electric properties of the polymer, such as high polarization and dielectric constant combined with low dielectric loss. Thus, a promising system to degrade organic pollutants in aqueous or gaseous systems under visible light irradiation has been developed.
The compounds found in industrial wastewater typically show high toxicity, and in this way, they have become a primary environmental concern. Several techniques have been applied in industrial ...effluent remediation. In spite of the efforts, these techniques are yet to be ineffective to treat oily wastewater before it can be discharged safely to the environment. Membrane technology is an attractive approach to treat oily wastewater. This is dedicated to the immobilisation of TiO
nanoparticles on poly(vinylidene fluoride-trifluoro ethylene) (PVDF-TrFE) porous matrix by solvent casting. Membranes with interconnected pores with an average diameter of 60 µm and a contact angle of 97°, decorated with TiO
nanoparticles, are obtained. The degradation of oily wastewater demonstrated the high photocatalytic efficiency of the nanocomposite membranes: Under sunlight irradiation for seven hours, colourless water was obtained.
Polymer-based piezoelectric biomaterials have already proven their relevance for tissue engineering applications. Furthermore, the morphology of the scaffolds plays also an important role in cell ...proliferation and differentiation. The present work reports on poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), a biocompatible, biodegradable, and piezoelectric biopolymer that has been processed in different morphologies, including films, fibers, microspheres, and 3D scaffolds. The corresponding magnetically active PHBV-based composites were also produced. The effect of the morphology on physico-chemical, thermal, magnetic, and mechanical properties of pristine and composite samples was evaluated, as well as their cytotoxicity. It was observed that the morphology does not strongly affect the properties of the pristine samples but the introduction of cobalt ferrites induces changes in the degree of crystallinity that could affect the applicability of prepared biomaterials. Young's modulus is dependent of the morphology and also increases with the addition of cobalt ferrites. Both pristine and PHBV/cobalt ferrite composite samples are not cytotoxic, indicating their suitability for tissue engineering applications.
TiO2:Au-based photocatalysis represents a promising alternative to remove contaminants of emerging concern (CECs) from wastewater under sunlight irradiation. However, spherical Au nanoparticles, ...generally used to sensitize TiO2, still limit the photocatalytic spectral band to the 520 nm region, neglecting a high part of sun radiation. Here, a ligand-free synthesis of TiO2:Au nanostars is reported, substantially expanding the light absorption spectral region. TiO2:Au nanostars with different Au component sizes and branching were generated and tested in the degradation of the antibiotic ciprofloxacin. Interestingly, nanoparticles with the smallest branching showed the highest photocatalytic degradation, 83% and 89% under UV and visible radiation, together with a threshold in photocatalytic activity in the red region. The applicability of these multicomponent nanoparticles was further explored with their incorporation into a porous matrix based on PVDF-HFP to open the way for a reusable energy cost-effective system in the photodegradation of polluted waters containing CECs.
Antibiotics represent one increasingly harmful type of contaminant of emerging concern in treated and non-treated water. They cause the generation of antibiotic-multiresistant organisms, one of the ...major challenges in current medicine. Plasmonic-photocatalysis using solar energy represents a promising solution for their removal with low energy consumption. Its successful application requires the improvement of photocatalysts' efficiency under sunlight and the development of robust, durable, and efficient substrates for photocatalysts immobilisation. In this work, hybrid TiO2:Au nanostars were initially synthesised. Then, two porous membranes were prepared to support this nanocatalyst based on poly (vinylidenefluoride-co-hexafluoropropylene) polymer. Doctor blade and salt leaching casting methods, combined with temperature-induced phase separation, were used to generate membranes with high porosity, 80–90%, which was maintained after nanoparticle incorporation (3, 8 and 10 wt%). The photocatalytic activity of the nanocomposite membranes was tested through the degradation of the antibiotic ciprofloxacin under UV and visible radiation. Salt-leaching membranes containing 10 wt% nanoparticles presented the highest degradation efficiencies, 45% under UV and 35% under visible radiation. In contrast, doctor blade membranes showed 36% and 32% degradation efficiencies, respectively. The reusability of the membranes was assessed in repeated cycles, presenting an average efficiency loss of only 2% after three uses. Finally, the reusability of these membranes was also tested in treated effluent water matrixes, presenting similar, or even better, degradation efficiencies, and a minimum reusability efficiency lost 0–1%. The results demonstrate that these membranes are a promising alternative for the degradation of a wide variety of contaminants under sunlight radiation.
Display omitted
•Synthesised TiO2:Au nanostars enhance sunlight absorption at visible wavelengths.•High control on polyvinylidene fluoride porous membrane morphologies.•Efficient degradation of ciprofloxacin under UV and visible radiation.•Membranes with 10 wt% of nanoparticles maintained efficiency after many uses.•Reusable membranes were fully functional in real water effluents.
PDF
