Powder metallurgy is a competitive technology to produce ferrous near net shape parts for diverse engineering applications. However, their inherent porosity increases the susceptibility to oxidation ...and sealing their surface is mandatory to avoid premature degradation. Alongside, polymer derived ceramics (PDCs), such as silicon-carbonitride, have drawn attention concerning their high temperature and chemical stability. However, PDCs undergo volume shrinkage during ceramization that leads to defect formation. The shrinkage can be compensated by the addition of fillers, which are also capable of tailoring the ceramic resulting properties. This work evaluates the processing of PDC-based coatings loaded with ZrO₂ and glass fillers to compensate for the shrinkage, densify the coating and seal the sintered steel surface. Therefore, polymeric slurries were sprayed onto sintered steel substrates, which were pyrolyzed at different temperatures for microstructural and oxidation resistance evaluation. Microstructural modifications caused by the enhanced glass viscous flow during pyrolysis at 800 °C resulted in more homogeneous, dense and protective coatings, which reduced the mass gain up to 40 wt% after 100 h of oxidation at 450 °C in air in comparison to the uncoated substrate. Moreover, no macrocracks or spallation were detected, confirming the feasibility of PDC composite barrier coatings for sintered steels.
In August 2015, the CALorimetric Electron Telescope (CALET), designed for long exposure observations of high energy cosmic rays, docked with the International Space Station (ISS) and shortly ...thereafter began to collect data. CALET will measure the cosmic ray electron spectrum over the energy range of 1 GeV to 20 TeV with a very high resolution of 2% above 100 GeV, based on a dedicated instrument incorporating an exceptionally thick 30 radiation-length calorimeter with both total absorption and imaging (TASC and IMC) units. Each TASC readout channel must be carefully calibrated over the extremely wide dynamic range of CALET that spans six orders of magnitude in order to obtain a degree of calibration accuracy matching the resolution of energy measurements. These calibrations consist of calculating the conversion factors between ADC units and energy deposits, ensuring linearity over each gain range, and providing a seamless transition between neighboring gain ranges. This paper describes these calibration methods in detail, along with the resulting data and associated accuracies. The results presented in this paper show that a sufficient accuracy was achieved for the calibrations of each channel in order to obtain a suitable resolution over the entire dynamic range of the electron spectrum measurement.
The Calorimetric Electron Telescope, CALET, is an astroparticle physics mission installed on the International Space Station, ISS. The primary objective of the mission is studying the details of ...galactic cosmic-ray acceleration and propagation, and searching for the possible nearby sources of high-energy electrons and dark matter signatures. The CALET experiment measure the flux of cosmic-ray electrons (including positrons) to 20 TeV, gamma-rays to 10 TeV and nuclei to 1000 TeV. The detector is an all-calorimetric instrument with a total vertical thickness of 30 radiation lengths and fine imaging capability, optimized for the measurement of the electron and positron (all-electron) spectrum well into the TeV energy region. It consists of a charge detector (CHD) with two layers of segmented plastic scintillators for the identification of cosmic-rays via a measurement of their charge over the range Z=1∼40, a 3 radiation length thick tungsten-scintillating fiber imaging calorimeter (IMC) and a 27 radiation length thick lead-tungstate calorimeter (TASC). The instrument was launched on August 19, 2015 to the ISS and installed on the Japanese Experiment Module-Exposed Facility. Since the start of operation in October, 2015, CALET has been collecting scientific data without any major interruption for more than eight years. The number of triggered events over 10 GeV is nearly 1.97 billion events as of November 30, 2023. In this paper, we present the results of the CALET mission so far, including the all-electron energy spectrum, the spectra of protons and other nuclei, gamma-ray observations, as well as the characterization of on-orbit performance. Some results on the electromagnetic counterpart search for LIGO/Virgo gravitational wave events and the observations of solar modulation and gamma-ray bursts are also included.
Iron and nickel cosmic ray nuclei play a key role in the understanding of the acceleration and propagation mechanisms of charged particles in our Galaxy. In fact, iron and nickel are the most ...abundant nuclei among the heavy elements and provide favorable conditions for a low background measurement thanks to the negligible contamination from spallation of higher mass elements. CALET, operating on the ISS since 2015, has excellent capabilities of charge discrimination up to nickel and can measure the energy of cosmic ray nuclei thanks to a lead tungstate calorimeter providing a direct and precise measurement of heavy charged nuclei spectra. In this contribution, a direct measurement of iron and nickel nuclei spectra in the energy range from 10 GeV/n to 2 TeV/n and from 8.8 GeV/n to 240 GeV/n, respectively is presented. More than five years of data collected by CALET were used. A detailed study of systematic uncertainties is also illustrated. The measured spectra are compared with the ones measured by other experiments and are compatible with a single power law fit in the energy region from 50 GeV/n to 2 TeV/n and from 20 GeV/n to 240 GeV/n for iron and nickel respectively. Also, the ratio between nickel and iron spectra is reported.
The CALorimetric Electron Telescope (CALET), launched for installation on the International Space Station (ISS) in August, 2015, has been accumulating scientific data since October, 2015. CALET is ...intended to perform long-duration observations of high-energy cosmic rays onboard the ISS. CALET directly measures the cosmic-ray electron spectrum in the energy range of 1 GeV to 20 TeV with a 2% energy resolution above 30 GeV. In addition, the instrument can measure the spectrum of gamma rays well into the TeV range, and the spectra of protons and nuclei up to a PeV.
In order to operate the CALET onboard ISS, JAXA Ground Support Equipment (JAXA-GSE) and the Waseda CALET Operations Center (WCOC) have been established at JAXA and Waseda University, respectively. Scientific operations using CALET are planned at WCOC, taking into account orbital variations of geomagnetic rigidity cutoff. Scheduled command sequences are used to control the CALET observation modes on orbit. Calibration data acquisition by, for example, recording pedestal and penetrating particle events, a low-energy electron trigger mode operating at high geomagnetic latitude, a low-energy gamma-ray trigger mode operating at low geomagnetic latitude, and an ultra heavy trigger mode, are scheduled around the ISS orbit while maintaining maximum exposure to high-energy electrons and other high-energy shower events by always having the high-energy trigger mode active. The WCOC also prepares and distributes CALET flight data to collaborators in Italy and the United States.
As of August 31, 2017, the total observation time is 689 days with a live time fraction of the total time of ∼ 84%. Nearly 450 million events are collected with a high-energy (E > 10 GeV) trigger. In addition, calibration data acquisition and low-energy trigger modes, as well as an ultra-heavy trigger mode, are consistently scheduled around the ISS orbit. By combining all operation modes with the excellent-quality on-orbit data collected thus far, it is expected that a five-year observation period will provide a wealth of new and interesting results.
PDF
