Knee injuries are one of the most common injuries. Falls during the immobilization period can deteriorate the postoperative outcome. The risk factors causing falls after initial injury and the ...question of whether a rigid orthosis serves as a protective factor remain unclear. The primary aim of the study was to record the fall rate in the first six weeks after arthroscopic intervention. The secondary aim was to assess the influences of risk factors and protective factors on these fall ratios. Different scores were examined and compared in the groups ‘fall event’ and ‘no fall’. Data from 51 patients (39 males, 12 females) with a mean age of 31.2 years (19–57 years) were collected. A total of 20 patients suffered at least one fall event within the observation period. A total of 18 of 23 fall events happened within the first three weeks postoperatively. The Extra Short Musculoskeletal Function Assessment Questionnaire (XSMFA) showed a significant difference between the groups (p = 0.02). People with multiple injuries to the knee joint were more likely to suffer fall events. Conclusively, patients with limited knee functions appeared to fall more frequently within the first three weeks postoperatively. Therefore, appropriate measures should be taken to protect the postoperative outcome. Physical therapy and patient behavioural training should be practiced perioperatively in patients at risk.
The Online Monitoring System (OMS) at the Compact Muon Solenoid experiment (CMS) at CERN aggregates and integrates different sources of information into a central place and allows users to view, ...compare and correlate information. It displays real-time and historical information. The tool is heavily used by run coordinators, trigger experts and shift crews, to ensure the quality and efficiency of data taking. It provides aggregated information for many use cases including data certification. OMS is the successor of Web Based Monitoring (WBM), which was in use during Run 1 and Run 2 of the LHC. WBM started as a small tool and grew substantially over the years so that maintenance became challenging. OMS was developed from scratch following several design ideas: to strictly separate the presentation layer from the data aggregation layer, to use a well-defined standard for the communication between presentation layer and aggregation layer, and to employ widely used frameworks from outside the HEP community. A report on the experience from the operation of OMS for the first year of data taking of Run 3 in 2022 is presented.
The CMS data acquisition (DAQ) is implemented as a service-oriented architecture where DAQ applications, as well as general applications such as monitoring and error reporting, are run as ...self-contained services. The task of deployment and operation of services is achieved by using several heterogeneous facilities, custom configuration data and scripts in several languages. In this work, we restructure the existing system into a homogeneous, scalable cloud architecture adopting a uniform paradigm, where all applications are orchestrated in a uniform environment with standardized facilities. In this new paradigm DAQ applications are organized as groups of containers and the required software is packaged into container images. Automation of all aspects of coordinating and managing containers is provided by the Kubernetes environment, where a set of physical and virtual machines is unified in a single pool of compute resources. We demonstrate that a container-based cloud architecture provides an acrossthe-board solution that can be applied for DAQ in CMS. We show strengths and advantages of running DAQ applications in a container infrastructure as compared to a traditional application model.
The CMS Orbit Builder for the HL-LHC at CERN Amoiridis, Vassileios; Behrens, Ulf; Bocci, Andrea ...
EPJ Web of Conferences,
2024, Letnik:
295
Journal Article, Conference Proceeding
Recenzirano
Odprti dostop
The Compact Muon Solenoid (CMS) experiment at CERN incorporates one of the highest throughput data acquisition systems in the world and is expected to increase its throughput by more than a factor of ...ten for High-Luminosity phase of Large Hadron Collider (HL-LHC). To achieve this goal, the system will be upgraded in most of its components. Among them, the event builder software, in charge of assembling all the data read out from the different sub-detectors, is planned to be modified from a single event builder to an orbit builder that assembles multiple events at the same time. The throughput of the event builder will be increased from the current 1.6 Tb/s to 51 Tb/s for the HL-LHC orbit builder. This paper presents preliminary network transfer studies in preparation for the upgrade. The key conceptual characteristics are discussed, concerning differences between the CMS event builder in Run 3 and the CMS Orbit Builder for the HL-LHC. For the feasibility studies, a pipestream benchmark, mimicking event-builder-like traffic has been developed. Preliminary performance tests and results are discussed.
The data acquisition (DAQ) of the Compact Muon Solenoid (CMS) experiment at CERN, collects data for events accepted by the Level-1 Trigger from the different detector systems and assembles them in an ...event builder prior to making them available for further selection in the High Level Trigger, and finally storing the selected events for offline analysis. In addition to the central DAQ providing global acquisition functionality, several separate, so-called “MiniDAQ” setups allow operating independent data acquisition runs using an arbitrary subset of the CMS subdetectors. During Run 2 of the LHC, MiniDAQ setups were running their event builder and High Level Trigger applications on dedicated resources, separate from those used for the central DAQ. This cleanly separated MiniDAQ setups from the central DAQ system, but also meant limited throughput and a fixed number of possible MiniDAQ setups. In Run 3, MiniDAQ-3 setups share production resources with the new central DAQ system, allowing each setup to operate at the maximum Level-1 rate thanks to the reuse of the resources and network bandwidth. Configuration management tools had to be significantly extended to support the synchronization of the DAQ configurations needed for the various setups. We report on the new configuration management features and on the first year of operational experience with the new MiniDAQ-3 system.
The High Luminosity LHC (HL-LHC) will start operating in 2027 after the third Long Shutdown (LS3), and is designed to provide an ultimate instantaneous luminosity of 7:5 × 10
34
cm
−2
s
−1
, at the ...price of extreme pileup of up to 200 interactions per crossing. The number of overlapping interactions in HL-LHC collisions, their density, and the resulting intense radiation environment, warrant an almost complete upgrade of the CMS detector. The upgraded CMS detector will be read out by approximately fifty thousand highspeed front-end optical links at an unprecedented data rate of up to 80 Tb/s, for an average expected total event size of approximately 8 − 10 MB. Following the present established design, the CMS trigger and data acquisition system will continue to feature two trigger levels, with only one synchronous hardware-based Level-1 Trigger (L1), consisting of custom electronic boards and operating on dedicated data streams, and a second level, the High Level Trigger (HLT), using software algorithms running asynchronously on standard processors and making use of the full detector data to select events for offline storage and analysis. The upgraded CMS data acquisition system will collect data fragments for Level-1 accepted events from the detector back-end modules at a rate up to 750 kHz, aggregate fragments corresponding to individual Level- 1 accepts into events, and distribute them to the HLT processors where they will be filtered further. Events accepted by the HLT will be stored permanently at a rate of up to 7.5 kHz. This paper describes the baseline design of the DAQ and HLT systems for the Phase-2 of CMS.
This paper outlines a software architecture where zero-copy operations are used comprehensively at every processing point from the Application layer to the Physical layer. The proposed architecture ...is being used during feasibility studies on advanced networking technologies for the CMS experiment at CERN. The design relies on a homogeneous peer-to-peer message passing system, which is built around memory pool caches allowing efficient and deterministic latency handling of messages of any size through the different software layers. In this scheme portable distributed applications can be programmed to process input to output operations by mere pointer arithmetic and DMA operations only. The approach combined with the open fabric protocol stack (OFED) allows one to attain near wire-speed message transfer at application level. The architecture supports full portability of user applications by encapsulating the protocol details and network into modular peer transport services whereas a transparent replacement of the underlying protocol facilitates deployment of several network technologies like Gigabit Ethernet, Myrinet, Infiniband, etc. Therefore, this solution provides a protocol-independent communication framework and prevents having to deal with potentially difficult couplings when the underlying communication infrastructure is changed. We demonstrate the feasibility of this approach by giving efficiency and performance measurements of the software in the context of the CMS distributed event building studies.
40 MHz Level-1 Trigger Scouting for CMS Badaro, Gilbert; Behrens, Ulf; Branson, James ...
EPJ Web of Conferences,
01/2020, Letnik:
245
Journal Article, Conference Proceeding
Recenzirano
Odprti dostop
The CMS experiment will be upgraded for operation at the HighLuminosity LHC to maintain and extend its physics performance under extreme pileup conditions. Upgrades will include an entirely new ...tracking system, supplemented by a track finder processor providing tracks at Level-1, as well as a high-granularity calorimeter in the endcap region. New front-end and back-end electronics will also provide the Level-1 trigger with high-resolution information from the barrel calorimeter and the muon systems. The upgraded Level-1 processors, based on powerful FPGAs, will be able to carry out sophisticated feature searches with resolutions often similar to the offline ones, while keeping pileup effects under control. In this paper, we discuss the feasibility of a system capturing Level-1 intermediate data at the beam-crossing rate of 40 MHz and carrying out online analyzes based on these limited-resolution data. This 40 MHz scouting system would provide fast and virtually unlimited statistics for detector diagnostics, alternative luminosity measurements and, in some cases, calibrations. It has the potential to enable the study of otherwise inaccessible signatures, either too common to fit in the Level-1 accept budget, or with requirements which are orthogonal to “mainstream” physics, such as long-lived particles. We discuss the requirements and possible architecture of a 40 MHz scouting system, as well as some of the physics potential, and results from a demonstrator operated at the end of Run-2 using the Global Muon Trigger data from CMS. Plans for further demonstrators envisaged for Run-3 are also discussed.
The Data Acquisition (DAQ) system of the Compact Muon Solenoid (CMS) experiment at the LHC is a complex system responsible for the data readout, event building and recording of accepted events. Its ...proper functioning plays a critical role in the data-taking efficiency of the CMS experiment. In order to ensure high availability and recover promptly in the event of hardware or software failure of the subsystems, an expert system, the DAQ Expert, has been developed. It aims at improving the data taking efficiency, reducing the human error in the operations and minimising the on-call expert demand. Introduced in the beginning of 2017, it assists the shift crew and the system experts in recovering from operational faults, streamlining the post mortem analysis and, at the end of Run 2, triggering fully automatic recovery without human intervention. DAQ Expert analyses the real-time monitoring data originating from the DAQ components and the high-level trigger updated every few seconds. It pinpoints data flow problems, and recovers them automatically or after given operator approval. We analyse the CMS downtime in the 2018 run focusing on what was improved with the introduction of automated recovery; present challenges and design of encoding the expert knowledge into automated recovery jobs. Furthermore, we demonstrate the web-based, ReactJS interfaces that ensure an effective cooperation between the human operators in the control room and the automated recovery system. We report on the operational experience with automated recovery.
The part of the CMS Data Acquisition (DAQ) system responsible for data readout and event building is a complex network of interdependent distributed applications. To ensure successful data taking, ...these programs have to be constantly monitored in order to facilitate the timeliness of necessary corrections in case of any deviation from specified behaviour. A large number of diverse monitoring data samples are periodically collected from multiple sources across the network. Monitoring data are kept in memory for online operations and optionally stored on disk for post-mortem analysis. We present a generic, reusable solution based on an open source NoSQL database, Elasticsearch, which is fully compatible and non-intrusive with respect to the existing system. The motivation is to benefit from an offthe-shelf software to facilitate the development, maintenance and support efforts. Elasticsearch provides failover and data redundancy capabilities as well as a programming language independent JSON-over-HTTP interface. The possibility of horizontal scaling matches the requirements of a DAQ
monitoring system. The data load from all sources is balanced by redistribution over an Elasticsearch cluster that can be hosted on a computer cloud. In order to achieve the necessary robustness and to validate the scalability of the approach the above monitoring solution currently runs in parallel with an existing in-house developed DAQ monitoring system.
PDF
