Millimeter-wave (mmWave) and sub-Terahertz (THz) frequencies are expected to play a vital role in 6G wireless systems and beyond due to the vast available bandwidth of many tens of GHz. This paper ...presents an indoor 3-D spatial statistical channel model for mmWave and sub-THz frequencies based on extensive radio propagation measurements at 28 and 140 GHz conducted in an indoor office environment from 2014 to 2020. Omnidirectional and directional path loss models and channel statistics such as the number of time clusters, cluster delays, and cluster powers were derived from over 15,000 measured power delay profiles. The resulting channel statistics show that the number of time clusters follows a Poisson distribution and the number of subpaths within each cluster follows a composite exponential distribution for both LOS and NLOS environments at 28 and 140 GHz. This paper proposes a unified indoor statistical channel model for mmWave and sub-Terahertz frequencies following the mathematical framework of the previous outdoor NYUSIM channel models. A corresponding indoor channel simulator is developed, which can recreate 3-D omnidirectional, directional, and multiple input multiple output (MIMO) channels for arbitrary mmWave and sub-THz carrier frequency up to 150 GHz, signal bandwidth, and antenna beamwidth. The presented statistical channel model and simulator will guide future air-interface, beamforming, and transceiver designs for 6G and beyond.
We report eclipse timing variation analyses of 26 compact hierarchical triple stars comprised of an eccentric eclipsing (‘inner’) binary and a relatively close tertiary component found in the Kepler ...field. We simultaneously fit the primary and secondary O − C curves of each system for the light-traveltime effect (LTTE), as well as dynamical perturbations caused by the tertiary on different time-scales. For the first time, we include those contributions of three-body interactions which originate from the eccentric nature of the inner binary. These effects manifest themselves both on the period of the triple system, P
2, and on the longer ‘apse-node’ time-scale. We demonstrate that consideration of the dynamically forced rapid apsidal motion yields an efficient and independent tool for the determination of the binary orbit's eccentricity and orientation, as well as the 3D configuration of the triple. Modelling the forced apsidal motion also helps to resolve the degeneracy between the shapes of the LTTE and the dynamical delay terms on the P
2 time-scale, due to the strong dependence of the apsidal motion period on the triple's mass ratio. This can lead to the independent determination of the binary and tertiary masses without the need for independent radial velocity measurements. Through the use of our analytic method for fitting O − C curves, we have obtained robust solutions for system parameters for the 10 most ideal triples of our sample, and only somewhat less robust, but yet acceptable, fits for the remaining systems. Finally, we study the results of our 26 system parameter fits via a set of distributions of various physically important parameters, including mutual inclination angle, and mass and period ratios.
We use a collection of 14 well-measured neutron-star masses to strengthen the case that a substantial fraction of these neutron stars were formed via electron-capture (e-capture) supernovae (SNe) as ...opposed to Fe core-collapse SNe. The e-capture SNe are characterized by lower resultant gravitational masses and smaller natal kicks, leading to lower orbital eccentricities when the e-capture SN has led to the formation of the second neutron star in a binary system. Based on the measured masses and eccentricities, we identify four neutron stars, which have a mean post-collapse gravitational mass of {approx}1.25 M {sub sun}, as the product of e-capture SNe. We associate the remaining 10 neutron stars, which have a mean mass of {approx}1.35 M {sub sun}, with Fe core-collapse SNe. If the e-capture SN occurs during the formation of the first neutron star, then this should substantially increase the formation probability for double neutron stars, given that more systems will remain bound with the smaller kicks. However, this does not appear to be the case for any of the observed systems and we discuss possible reasons for this.
Frequencies from 100 GHz to 3 THz are promising bands for the next generation of wireless communication systems because of the wide swaths of unused and unexplored spectrum. These frequencies also ...offer the potential for revolutionary applications that will be made possible by new thinking, and advances in devices, circuits, software, signal processing, and systems. This paper describes many of the technical challenges and opportunities for wireless communication and sensing applications above 100 GHz, and presents a number of promising discoveries, novel approaches, and recent results that will aid in the development and implementation of the sixth generation (6G) of wireless networks, and beyond. This paper shows recent regulatory and standard body rulings that are anticipating wireless products and services above 100 GHz and illustrates the viability of wireless cognition, hyper-accurate position location, sensing, and imaging. This paper also presents approaches and results that show how long distance mobile communications will be supported to above 800 GHz since the antenna gains are able to overcome air-induced attenuation, and present methods that reduce the computational complexity and simplify the signal processing used in adaptive antenna arrays, by exploiting the Special Theory of Relativity to create a cone of silence in over-sampled antenna arrays that improve performance for digital phased array antennas. Also, new results that give insights into power efficient beam steering algorithms, and new propagation and partition loss models above 100 GHz are given, and promising imaging, array processing, and position location results are presented. The implementation of spatial consistency at THz frequencies, an important component of channel modeling that considers minute changes and correlations over space, is also discussed. This paper offers the first in-depth look at the vast applications of THz wireless products and applications and provides approaches for how to reduce power and increase performance across several problem domains, giving early evidence that THz techniques are compelling and available for future wireless communications.
ABSTRACT We present a binary evolution study of cataclysmic variables (CVs) and related systems with white dwarf (WD) accretors, including for example, AM CVn systems, classical novae, supersoft ...X-ray sources (SXSs), and systems with giant donor stars. Our approach intentionally avoids the complications associated with population synthesis algorithms, thereby allowing us to present the first truly comprehensive exploration of all of the subsequent binary evolution pathways that zero-age CVs might follow (assuming fully non-conservative, Roche-lobe overflow onto an accreting WD) using the sophisticated binary stellar evolution code MESA. The grid consists of 56,000 initial models, including 14 WD accretor masses, 43 donor-star masses (0.1-4.7 M ), and 100 orbital periods. We explore evolution tracks in the orbital period and donor-mass (Porb-Mdon) plane in terms of evolution dwell times, masses of the WD accretor, accretion rate, and chemical composition of the center and surface of the donor star. We report on the differences among the standard CV tracks, those with giant donor stars, and ultrashort period systems. We show where in parameter space one can expect to find SXSs, present a diagnostic to distinguish among different evolutionary paths to forming AM CVn binaries, quantify how the minimum orbital period in CVs depends on the chemical composition of the donor star, and update the Porb(Mwd) relation for binaries containing WDs whose progenitors lost their envelopes via stable Roche-lobe overflow. Finally, we indicate where in the Porb-Mdon the accretion disks will tend to be stable against the thermal-viscous instability, and where gravitational radiation signatures may be found with LISA.
Ultra-wideband millimeter-wave (mmWave) propagation measurements were conducted in the 28- and 73-GHz frequency bands in a typical indoor office environment in downtown Brooklyn, New York, on the ...campus of New York University. The measurements provide large-scale path loss and temporal statistics that will be useful for ultra-dense indoor wireless networks for future mmWave bands. This paper presents the details of measurements that employed a 400 Megachips-per-second broadband sliding correlator channel sounder, using rotatable highly directional horn antennas for both co-polarized and cross-polarized antenna configurations. The measurement environment was a closed-plan in-building scenario that included a line-of-sight and non-line-of-sight corridor, a hallway, a cubicle farm, and adjacent-room communication links. Well-known and new single-frequency and multi-frequency directional and omnidirectional large-scale path loss models are presented and evaluated based on more than 14 000 directional power delay profiles acquired from unique transmitter and receiver antenna pointing angle combinations. Omnidirectional path loss models, synthesized from the directional measurements, are provided for the case of arbitrary polarization coupling, as well as for the specific cases of co-polarized and cross-polarized antenna orientations. The results show that novel large-scale path loss models provided here are simpler and more physically based compared to previous 3GPP and ITU indoor propagation models that require more model parameters and offer very little additional accuracy and lack a physical basis. Multipath time dispersion statistics for mmWave systems using directional antennas are presented for co-polarization, crosspolarization, and combined-polarization scenarios, and show that the multipath root mean square delay spread can be reduced when using transmitter and receiver antenna pointing angles that result in the strongest received power. Raw omnidirectional path loss data and closed-form optimization formulas for all path loss models are given in the Appendices.
This paper compares three candidate large-scale propagation path loss models for use over the entire microwave and millimeter-wave (mmWave) radio spectrum: the alpha-beta-gamma (ABG) model, the ...close-in (CI) free-space reference distance model, and the CI model with a frequency-weighted path loss exponent (CIF). Each of these models has been recently studied for use in standards bodies such as 3rd Generation Partnership Project (3GPP) and for use in the design of fifth-generation wireless systems in urban macrocell, urban microcell, and indoor office and shopping mall scenarios. Here, we compare the accuracy and sensitivity of these models using measured data from 30 propagation measurement data sets from 2 to 73 GHz over distances ranging from 4 to 1238 m. A series of sensitivity analyses of the three models shows that the four-parameter ABG model underpredicts path loss when relatively close to the transmitter, and overpredicts path loss far from the transmitter, and that the physically based two-parameter CI model and three-parameter CIF model offer computational simplicity, have very similar goodness of fit (i.e., the shadow fading standard deviation), exhibit more stable model parameter behavior across frequencies and distances, and yield smaller prediction error in sensitivity tests across distances and frequencies, when compared to the four-parameter ABG model. Results show the CI model with a 1-m reference distance is suitable for outdoor environments, while the CIF model is more appropriate for indoor modeling. The CI and CIF models are easily implemented in existing 3GPP models by making a very subtle modification - by replacing a floating non-physically based constant with a frequency-dependent constant that represents free-space path loss in the first meter of propagation. This paper shows this subtle change does not change the mathematical form of existing ITU/3GPP models and offers much easier analysis, intuitive appeal, better model parameter stability, and better accuracy in sensitivity tests over a vast range of microwave and mmWave frequencies, scenarios, and distances, while using a simpler model with fewer parameters.
Tidally trapped pulsations in binary stars Fuller, J; Kurtz, D W; Handler, G ...
Monthly notices of the Royal Astronomical Society,
11/2020, Letnik:
498, Številka:
4
Journal Article
Recenzirano
Odprti dostop
ABSTRACT
A new class of pulsating binary stars was recently discovered, whose pulsation amplitudes are strongly modulated with orbital phase. Stars in close binaries are tidally distorted, so we ...examine how a star’s tidally induced asphericity affects its oscillation mode frequencies and eigenfunctions. We explain the pulsation amplitude modulation via tidal mode coupling such that the pulsations are effectively confined to certain regions of the star, e.g. the tidal pole or the tidal equator. In addition to a rigorous mathematical formalism to compute this coupling, we provide a more intuitive semi-analytic description of the process. We discuss three resulting effects: (1) Tidal alignment, i.e. the alignment of oscillation modes about the tidal axis rather than the rotation axis; (2) Tidal trapping, e.g. the confinement of oscillations near the tidal poles or the tidal equator; (3) Tidal amplification, i.e. increased flux perturbations near the tidal poles where acoustic modes can propagate closer to the surface of the star. Together, these phenomena can account for the pulsation amplitude and phase modulation of the recently discovered class of ‘tidally tilted pulsators.’ We compare our theory to the three tidally tilted pulsators HD 74423, CO Cam, and TIC 63328020, finding that tidally trapped modes that are axisymmetric about the tidal axis can largely explain the first two, while a non-axisymmetric tidally aligned mode is present in the latter. Finally, we discuss implications and limitations of the theory, and we make predictions for the many new tidally tilted pulsators likely to be discovered in the near future.
We have observed several relatively deep transits of the white dwarf WD 1145+017 with the Gran Telescopio Canarias (GTC) in the wavelength range 480 to 920 nm. The observations covered approximately ...one hour on 2016 January 18 and two hours on 2016 January 20. There was variable extinction of the white dwarf during much of that time, but this extinction was punctuated by four sharp transits with depths ranging from 25% to 40%. The spectrum was dispersed with a grism and the flux data were ultimately summed into four bands centered at 0.53, 0.62, 0.71, and 0.84 μm. After careful normalization, we find that the flux light curves in all four bands are consistently the same, including through the deepest dips. We use these results to compute Ångström exponents, α, for the particles responsible for the extinction and find |⟨ α ⟩| ≲ 0.06, assuming that the extinction is relatively optically thin. We use the complex indices of refraction for common minerals to set constraints on the median sizes of possible dust grains and find that particle sizes ≲0.5 μm can be excluded for most common minerals.
Massive MIMO systems are well-suited for mm-Wave communications, as large arrays can be built with reasonable form factors, and the high array gains enable reasonable coverage even for outdoor ...communications. One of the main obstacles for using such systems in frequency-division duplex mode, namely, the high overhead for the feedback of channel state information (CSI) to the transmitter, can be mitigated by the recently proposed joint spatial division and multiplexing (JSDM) algorithm. In this paper, we analyze the performance of this algorithm in some realistic propagation channels that take into account the partial overlap of the angular spectra from different users, as well as the sparsity of mm-Wave channels. We formulate the problem of user grouping for two different objectives, namely, maximizing spatial multiplexing and maximizing total received power in a graph-theoretic framework. As the resulting problems are numerically difficult, we proposed (sub optimum) greedy algorithms as efficient solution methods. Numerical examples show that the different algorithms may be superior in different settings. We furthermore develop a new, "degenerate" version of JSDM that only requires average CSI at the transmitter and thus greatly reduces the computational burden. Evaluations in propagation channels obtained from ray tracing results, as well as in measured outdoor channels, show that this low-complexity version performs surprisingly well in mm-Wave channels.