This research provides a characterization of ancient Roman mortars from “Villa del Capo di Sorrento” (commonly known as “Villa di Pollio Felice” or “Bagni della Regina Giovanna”). A deepened analysis ...of cementitious binding matrix and aggregates was conducted with the aims of determining possible sources of raw materials and the mix recipe, and to evaluate the minerogenetic secondary processes. Twenty samples taken from the Villa were investigated by means of a multi-analytical approach, including polarized optical microscopy on thin sections, X-ray powder diffraction, scanning electron microscopy analysis, energy dispersed spectrometry, simultaneous thermal analyses, and mercury intrusion porosimetry. Bedding mortars were made with slaked lime mixed with volcanic materials, whereas coating mortars were made adding to previous recipe as ceramic fragments. All samples were classified as hydraulic mortars. Cementitious binding matrix was characterized by gel-like C-A-S-H, calcite, hydrocalumite, and gypsum, deriving from lime/pozzolanic material. Geomaterials used for mortar production had a local origin. Pozzolanic materials, such as volcanic fragments, scoriae, pumice, and crystal fragments derived from both pyroclastic rocks of the Campi Flegrei district and from rocks of the Somma-Vesuvio complex; porosity test suggest that the products related to minerogenetic secondary processes, make mortars more resistant.
This paper deals with the “modern” plaster mortars based on air lime, hydraulic lime, and cement used between the 1950s and 1990s of the last century, taking, as a case study, a historical building ...of the Cagliari city whose foundations and ground floor are cut into in-situ limestone. Different plaster layers (i.e., arriccio and intonachino, paint), applied on the excavated limestone walls, were collected from cave-room. All samples were analysed by optical and electron (SEM-EDS) microscopy and X-ray diffractometry (XRD) in order to define their microstructures, textures and compositional features. In addition, real and bulk density, water and helium open porosity, water absorption kinetic, and saturation index were measured. By microscopic imaging analyses, the binder/aggregate ratio as vol.% was determined. Results revealed that cement mortars, composed mainly of C-S-H, C-A-H, and C-F-H phases, given their high hydraulicity, low open porosity, and a rigid behaviour, showed a good chemical but not physical–mechanical adherence, as they were often found detached from the substrate and frequently loaded with salt efflorescence. On the contrary, the hydraulic lime-based mortars, characterised by a binder composed of C-S-H and C-A-H phases and calcite derived from the portlandite carbonation, showed a greater affinity with limestone substrate and other plasters. Thus, they are more suitable to be used as a repair mortar, showing a long durability on the time. The thin air lime-based plasters (intonachino) showed a good adhesion to the substrate, exerting their coating function better than the harder, cement-based mortars. Lime-based wall paints have a good chemical adhesion and adaptability to the irregular surface of the substrate, due to low thickness of lime paint layers (<1 mm) that confers an elastic physical behaviour.
The present paper assesses petrographic, mineralogical, chemical, and technological features of different zeolitic tuff samples from various western USA districts of the Basin and Range Province ...containing mainly erionite, mordenite, clinoptilolite/heulandite and phillipsite. The aim of this characterization is to evaluate the pozzolanic activity of these samples according to European normative UNI-EN 196/5 (Fratini test) to program a possible use as addition for blended cements. Petrographic and mineralogical results show that the two phillipsite-bearing tuffs have a higher theoretical Cation Exchange Capacity (CEC) than the other samples; technological characterization shows a pozzolanic behavior for all the samples but higher for the tuff samples containing phillipsite, which shows a higher reactivity with CaO. All the samples could be thus advantageously employed for the preparation of blended cements, potentially reducing CO
emissions by 70-90%.
Alteration of basaltic glass and in situ mineral growth are fundamental processes that influence the chemical and material properties of Earth's oceanic crust. These processes have evolved at the ...basaltic island of Surtsey (SW Iceland) since eruptions terminated in 1967. Here, subaerial and submarine lapilli tuff samples from a 192 m-deep borehole drilled in 2017 (SE-02b) are characterized through petrographic studies, X-ray powder diffraction analyses, and SEM-EDS imaging and chemical analyses. The integrated results reveal (i) multi-stage palagonitization processes in basaltic glass and precipitation of secondary minerals from matrix pore fluids, (ii) multi-stage crystallization of secondary phillipsite, analcime and Al-tobermorite in the vesicles of basaltic pyroclasts and (iii) variations in palagonitization processes as a function of thermal and hydrological domains. Although temperature appears to be an important factor in controlling rates of secondary mineralization, the chemistry of original basaltic components and interstitial fluids also influences reaction pathways in the young pyroclastic deposits. The integration of systematic mineralogical analyses of the 50-year-old tuff from one of the most carefully monitored volcanic sites on Earth, together with temperature monitoring in boreholes since 1980, provide a reference framework for evaluating mineralogical evolution in other Surtseyan-type volcanoes worldwide.
Aim of this study is the characterisation of ancient Roman mortars collected in
Piscina Mirabilis
, located in the important geological, archaeological and historical area of the Campania Region ...(southern Italy): the
Campi Flegrei
. Goals of this research were (a) improving knowledge of Roman construction techniques by means of detailed microstructural and compositional examination of cementitious binding matrix and aggregates, to point out both mortar mix-design and provenance of raw materials, (b) the study of secondary minerogenetic processes and (c) comparison with modern mortars. Thanks to the permission by the former
Soprintendenza Archeologia della Campania
(authority of the archaeological heritage) current
“Parco Archeologico dei Campi Flegrei”,
it was possible to collect small, non-invasive, but representative samples of mortars. Samples were studied by combined methodologies such as optical microscopy (OM) on thin sections, X-ray powder diffraction (XRPD), scanning electron microscopy analysis (SEM), energy-dispersion X-ray spectroscopy (EDS), simultaneous thermal analyses (STA) and mercury intrusion porosimetry (MIP). Results showed that local geomaterials were used in this archaeological site, as they are well consistent with the surrounding geological setting. A relevant characteristic is the hydraulicity of these mortars shown by the reaction rims of pozzolanic materials. Composition of the cementitious binding matrix is characterized by various products of reaction, including amorphous C-A-S-H gel, calcite and Al-tobermorite. Results also highlighted that porosity represents the main difference between ancient Roman mortars and modern hydraulic ones.
The topic of this study is the archaeometric characterization of mortars from Villa del Pezzolo, a Roman Villa located in Seiano (Napoli-Campania, Italy), dated between the 1st century B.C. and the ...3rd century A.D. Mortars were analyzed by means of a multi-analytical approach (polarized optical microscopy, X-ray powder diffraction, scanning electron microscopy and energy-dispersed spectrometry, thermal analyses and mercury intrusion porosimetry) according to existing recommendations. Analytical results evidenced the use of local geomaterials composed of sedimentary and volcanic aggregates in the mix design and confirmed the three distinct building phases identified by archaeologists. Volcanic tuff fragments, identified in the 1st building phase can be ascribed to Campanian Ignimbrite formation, widely cropping out in the Sorrento Peninsula, as confirmed by the presence of glassy shards, partially devitrified and replaced by authigenic feldspar, a typical feature of welded grey ignimbrite lithofacies (WGI). Volcanic aggregates in samples of the 2nd and 3rd building phases show, instead, the presence of leucite-bearing volcanic scoriae and garnet crystal fragments related to Somma-Vesuvius products. Study of these mortars allowed us to: (1) understand the production technologies; (2) highlight use of materials with hydraulic behavior, such as volcanic and fictile fragments; (3) confirm the three building phases from compositional features of mortars and (4) highlight the change over time of the volcanic aggregate for mortars mix-design.
Natural stones have represented one of the main building materials since ancient times. In recent decades, a worsening in degradation phenomena related mostly to environmental pollution was observed, ...threatening their conservation. The present work is focused on the minero-petrographic and geochemical characterization of black crust (BC) samples taken from the historical center of Naples, after selecting two pilot monumental areas. The latter were chosen based on their historical importance, type of material, state of preservation and position in the urban context (i.e., high vehicular traffic area, limited traffic area, industrial area, etc.). The building materials used and their interaction with environmental pollutions were studied comparing the results obtained by means of different analytical techniques such as polarized light Optical Microscopy (OM), scanning electron microscopy with energy dispersion system (SEM-EDS), X-ray powder diffraction (XRPD) and laser ablation coupled with inductive plasma mass spectrometry (LA-ICP-MS).
Antifouling Mortars for Underwater Restoration Ricca, Michela; Ruffolo, Silvestro Antonio; La Russa, Mauro Francesco ...
Nanomaterials,
04/2022, Letnik:
12, Številka:
9
Journal Article
Recenzirano
Odprti dostop
This research has focused on the assessment of the compositional features and mechanical and antifouling performances of two different mortars formulated for an underwater setting, and which contain ...Mg(OH)
as an antifouling agent. Regarding the mechanical characterization, the uniaxial compressive strength and flexural strength were measured. The composition of the materials was explored by differential thermal/thermogravimetric analysis (DTA-TG), X-ray diffraction analysis (XRPD), and scanning electronic microscopy (SEM) coupled with EDS microanalysis. The assessment of the biological colonization was evaluated with colorimetric analysis and image analysis. The results suggest that both mortars have good mechanical resistance once set underwater. Moreover, the adding of Mg(OH)
improves the resistance toward biofouling; this was observed both in laboratory and sea-exposed specimens.