We propose a kinematical enhancement of the tt¯ charge asymmetry at the LHC by selecting events with the tt¯ centre of mass frame highly boosted along the beam axis. This kinematical selection ...increases the asymmetries and their significance up to a factor of two in a rather model-independent fashion. Hence, it can be a perfect complement to enhance model discrimination at the LHC.
ATLAS has formed strip CMOS project to study the use of CMOS MAPS devices as silicon strip sensors for the Phase-II Strip Tracker Upgrade. This choice of sensors promises several advantages over the ...conventional baseline design, such as better resolution, less material in the tracking volume, and faster construction speed. At the same time, many design features of the sensors are driven by the requirement of minimizing the impact on the rest of the detector. Hence the target devices feature long pixels which are grouped to form a virtual strip with binary-encoded z position. The key performance aspects are radiation hardness compatibility with HL-LHC environment, as well as extraction of the full hit position with full-reticle readout architecture. To date, several test chips have been submitted using two different CMOS technologies. The AMS 350nm is a high voltage CMOS process (HV-CMOS), that features the sensor bias of up to 120V. The TowerJazz 180nm high resistivity CMOS process (HR-CMOS) uses a high resistivity epitaxial layer to provide the depletion region on top of the substrate. We have evaluated passive pixel performance, and charge collection projections. The results strongly support the radiation tolerance of these devices to radiation dose of the HL-LHC in the strip tracker region. We also describe design features for the next chip submission that are motivated by our technology evaluation.
A
bstract
We investigate a charge asymmetry in
production at the LHC that provides complementary information to the measured asymmetries in
production. We estimate the experimental uncertainty in its ...measurement at the LHC with 8 TeV and 14 TeV. We argue that, for new physics models that simultaneously reproduce the asymmetry excess in
production at the Tevatron and the SM-like asymmetry at the LHC, the measurement in
production at the LHC is likely to deviate from the SM prediction. In two new physics models studied in detail we find that the deviations could be significant and observable at the 14 TeV run.
Charge collection in irradiated HV-CMOS detectors Hiti, B.; Affolder, A.; Arndt, K. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2019, Letnik:
924, Številka:
C
Journal Article
Recenzirano
Odprti dostop
Active silicon detectors built on p-type substrate are a promising technological solution for large area silicon trackers such as those at the High Luminosity LHC, but the radiation hardness of this ...novel approach has to be evaluated. Active n-in-p strip detector prototypes CHESS2 for ATLAS with different substrate resistivities in the range of 20–1000 Ωcm were irradiated with neutrons and protons up to a fluence of 2×1015neqcm−2 and 3.6×1015neqcm−2. Charge collection in passive test structures on the chip was evaluated using Edge-TCT and minimum ionising electrons from 90Sr. Results were used to assess radiation hardness of the detector in the given fluence range and to determine parameters of initial acceptor removal in different substrates.
•Irradiated samples of different initial resistivity between 20 and a few 1000 Ω cm.•Characterisation with edge transient current technique and 90Sr beta electrons.•Sensitive region increases after irradiation due to acceptor removal.•Parameters of acceptor removal estimated for neutron irradiation.•After proton irradiation larger sensitive region than after neutron irradiation.
In proton-proton collisions at the LHC, pairs of top and anti-top quarks are expected to be mostly produced through gluon fusion, in contrast to production at the Tevatron, where quark annihilation ...dominates. Making use of the large number of top quark pairs, we present measurements of the spin correlation between top and anti-top quarks as well as of the top quark charge asymmetry, which constitute important tests of QCD and are sensitive to new physics. We also discuss top production in association of photons and Z bosons.
The ATLAS jet trigger, in combination with other triggers, provides an important ingredient to studies of Standard Model physics and searches for new physics at the LHC. The ATLAS jet trigger system ...has undergone substantial modifications over the past few years of LHC operations, as experience developed with triggering in a high luminosity and high event pileup environment. In particular, the region-of-interest (ROI) based strategy has been replaced by a full scan of the calorimeter data at the third trigger level, and by a full scan of the level-1 trigger input at level-2 for some specific trigger chains. Hadronic calibration and cleaning techniques are applied in order to provide improved performance and increased stability in high luminosity data taking conditions. In this presentation we describe the structure and performance of the jet trigger in recent data taking conditions.
Study of CMOS strip sensor for future silicon tracker Han, Y.; Zhu, H.; Affolder, A. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
11/2020, Letnik:
981, Številka:
C
Journal Article
Recenzirano
Odprti dostop
Monolithic silicon sensors developed with High-Voltage CMOS (HV-CMOS) processes have become highly attractive for charged particle tracking. Compared with the standard CMOS sensors, HV-CMOS sensors ...can provide larger and deeper depletion regions that lead to larger signals and faster charge collection. They can provide high position resolution, low material budget, high radiation hardness and low cost that are desirable for high performance tracking in harsh collision environment. Various studies have been conducted to explore the technology feasibility for the large-area tracking systems at future collider experiments.
CHESS (CMOS HV/HR Evaluation for Strip Sensor) sensor series have been developed as an alternative solution to the conventional silicon micro-strip detectors for the ATLAS inner tracker upgrade. The first prototype (named CHESS1) was to evaluate the diode geometry and the in-pixel analog electronics. Obtained test results were used to optimize the second prototype (named CHESS2). CHESS2 was implemented with a full digital readout architecture and realized as a full reticle sized monolithic sensor. In this paper, the basic characteristics of the CHESS2 prototype sensors and their performance in response to different input signals are presented.