In order to achieve the challenging requirements on the CLIC vertex detector, a range of technology options have been considered in recent years. One prominent idea is the use of active sensors ...implemented in a commercial high-voltage CMOS process, capacitively coupled to hybrid pixel readout chips. Recent results have shown the approach to be feasible, though more detailed studies of the performance of such devices, including simulation, are required. The CLICdp collaboration has developed a number of ASICs as part of its vertex detector R&D programme, and here we present results on the performance of a CCPDv3 active sensor glued to a CLICpix readout chip. Charge collection characteristics and tracking performance have been measured over the full expected angular range of incident particles using 120 GeV/c secondary hadron beams from the CERN SPS. Single hit efficiencies have been observed above 99% in the full range of track incidence angles, down to shallow angles. The single hit resolution has also been observed to be stable over this range, with a resolution around 6µm. The measured charge collection characteristics have been compared to simulations carried out using the Sentaurus TCAD finite-element simulation package combined with circuit simulations and parametrisations of the readout chip response. The simulations have also been successfully used to reproduce electric fields, depletion depths and the current–voltage characteristics of the device, and have been further used to make predictions about future device designs.
We present a study of showers initiated by 1-100 GeV positrons, pions, kaons, and protons in the highly granular CALICE analogue scintillator-tungsten hadronic calorimeter. The data were taken at the ...CERN PS and SPS. The analysis includes measurements of the calorimeter response to each particle type and studies of the longitudinal and radial shower development. The results are compared to several Geant4 simulation models.
The Compact Linear Collider (CLIC) is an option for a future
e
+
e
-
collider operating at centre-of-mass energies up to
3
TeV
, providing sensitivity to a wide range of new physics phenomena and ...precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages:
s
=
350
GeV
, 1.4 and
3
TeV
. The initial stage of operation allows the study of Higgs boson production in Higgsstrahlung (
e
+
e
-
→
Z
H
) and
W
W
-fusion (
e
+
e
-
→
H
ν
e
ν
¯
e
), resulting in precise measurements of the production cross sections, the Higgs total decay width
Γ
H
, and model-independent determinations of the Higgs couplings. Operation at
s
>
1
TeV
provides high-statistics samples of Higgs bosons produced through
W
W
-fusion, enabling tight constraints on the Higgs boson couplings. Studies of the rarer processes
e
+
e
-
→
t
t
¯
H
and
e
+
e
-
→
H
H
ν
e
ν
¯
e
allow measurements of the top Yukawa coupling and the Higgs boson self-coupling. This paper presents detailed studies of the precision achievable with Higgs measurements at CLIC and describes the interpretation of these measurements in a global fit.
A
bstract
The Compact Linear Collider (CLIC) is a proposed future high-luminosity linear electron-positron collider operating at three energy stages, with nominal centre-of-mass energies
s
= 380 GeV, ...1
.
5 TeV, and 3 TeV. Its aim is to explore the energy frontier, providing sensitivity to physics beyond the Standard Model (BSM) and precision measurements of Standard Model processes with an emphasis on Higgs boson and top-quark physics. The opportunities for top-quark physics at CLIC are discussed in this paper. The initial stage of operation focuses on top-quark pair production measurements, as well as the search for rare flavour-changing neutral current (FCNC) top-quark decays. It also includes a top-quark pair production threshold scan around 350 GeV which provides a precise measurement of the top-quark mass in a well-defined theoretical framework. At the higher-energy stages, studies are made of top-quark pairs produced in association with other particles. A study of t
̄
tH production including the extraction of the top Yukawa coupling is presented as well as a study of vector boson fusion (VBF) production, which gives direct access to high-energy electroweak interactions. Operation above 1 TeV leads to more highly collimated jet environments where dedicated methods are used to analyse the jet constituents. These techniques enable studies of the top-quark pair production, and hence the sensitivity to BSM physics, to be extended to higher energies. This paper also includes phenomenological interpretations that may be performed using the results from the extensive top-quark physics programme at CLIC.
The ALICE Geant4 Simulation Hřivnáčová, I; Datskova, O; Gheata, A ...
Journal of physics. Conference series,
01/2011, Letnik:
331, Številka:
3
Journal Article
Recenzirano
Odprti dostop
ALICE adopted a strategy to develop a virtual interface to the detector simulation codes, the Virtual Monte Carlo 1, with which the transport of particles can be performed with three different ...detector simulation codes: GEANT 3.21 2, Geant4 3, and FLUKA 4. The Root geometrical modeller, TGeo 5, was adopted by ALICE as the unique geometry description in the simulation and reconstruction framework. This implied the integration of the TGeo geometrical modeller with all the transport codes used. GEANT3 was the most frequently used detector transport codes in past years, however, the recent LHC data production has created a greater interest in other transport codes. In this paper we will present our experience with Geant4. We will give an overview and the present status of the tools used in the Geant4 simulation: the implementation of the Virtual Monte Carlo interface, Geant4 VMC 6, and the implementation of Geant4 geometry navigation using directly the TGeo geometry, G4Root 7. We will also present the deployment of these tools on the Grid, the results obtained, as well as their comparison with GEANT3 and with real data.
The vertex detector at the proposed CLIC multi-TeV linear e+e− collider must have minimal material content and high spatial resolution, combined with accurate time-stamping to cope with the expected ...high rate of beam-induced backgrounds. One of the options being considered is the use of active sensors implemented in a commercial high-voltage CMOS process, capacitively coupled to hybrid pixel ASICs. A prototype of such an assembly, using two custom designed chips (CCPDv3 as active sensor glued to a CLICpix readout chip), has been characterised both in the lab and in beam tests at the CERN SPS using 120GeV/c positively charged hadrons. Results of these characterisation studies are presented both for single and dual amplification stages in the active sensor, where efficiencies of greater than 99% have been achieved at −60V substrate bias, with a single hit resolution of 6.1μm. Pixel cross-coupling results are also presented, showing the sensitivity to placement precision and planarity of the glue layer.
A new design of a detector plane of sub-millimetre thickness for an electromagnetic sampling calorimeter is presented. It is intended to be used in the luminometers LumiCal and BeamCal in future ...linear e
+
e
-
collider experiments. The detector planes were produced utilising novel connectivity scheme technologies. They were installed in a compact prototype of the calorimeter and tested at DESY with an electron beam of energy 1–5 GeV. The performance of a prototype of a compact LumiCal comprising eight detector planes was studied. The effective Molière radius at 5 GeV was determined to be (8.1 ± 0.1 (stat) ± 0.3 (syst)) mm, a value well reproduced by the Monte Carlo (MC) simulation (8.4 ± 0.1) mm. The dependence of the effective Molière radius on the electron energy in the range 1–5 GeV was also studied. Good agreement was obtained between data and MC simulation.