We describe the incorporation of multiple fluorophores into a single stranded DNA (ssDNA) chain using terminal deoxynucleotidyl transferase (TdT), a template-independent DNA polymerase that catalyzes ...the sequential addition of deoxynucleotides (dNTPs) at the 3'-OH group of an oligonucleotide primer; we term this methodology surface initiated enzymatic polymerization (SIEP) of DNA. We found that long (>1 Kb) ssDNA homopolymer can be grown by SIEP, and that the length of the ssDNA product is determined by the monomer to oligonucleotide initiator ratio. We observed efficient initiation (≥50%) and narrow polydispersity of the extended product when fluorescently labeled nucleotides are incorporated. TdT's ability to incorporate fluorescent dNTPs into a ssDNA chain was characterized by examining the effect of the molar ratios of fluorescent dNTP to natural dNTP on the degree of fluorophore incorporation and the length of the polymerized DNA strand. These experiments allowed us to optimize the polymerization conditions to incorporate up to ~50 fluorescent Cy3-labeled dNTPs per kilobase into a ssDNA chain. With the goal of using TdT as an on-chip labeling method, we also quantified TdT mediated signal amplification on the surface by immobilizing ssDNA oligonucleotide initiators on a glass surface followed by SIEP of DNA. The incorporation of multiple fluorophores into the extended DNA chain by SIEP translated to a ~45 fold signal amplification compared to the incorporation of a single fluorophore. SIEP was then employed to detect hybridization of DNA, by the posthybridization, on-chip polymerization of fluorescently labeled ssDNA that was grown from the 3'-OH of target strands that hybridized to DNA probes that were printed on a surface. A dose-response curve for detection of DNA hybridization by SIEP was generated, with a ~1 pM limit of detection and a linear dynamic range of 2 logs.
Surface plasmon resonance (SPR) spectroscopy has been used to study DNA assembly, DNA hybridization, and protein–DNA interactions on two streptavidin (SA) sensor chips. On one chip, SA molecules are ...immobilized on a biotin-exposed surface, forming an ordered two-dimensional (2D) SA monolayer. The other chip, BIAcore's SA chip, contains SA molecules immobilized within a three-dimensional (3D) carboxylated dextran matrix. Compared to the 2D chip, the 3D SA matrix allows for a slower immobilization rate of biotinylated DNA due to diffusion limitation in the dextran matrix, but with twice the amount of the immobilized DNA due to the greater number of reactive sites, which in turn enables a higher sensitivity for DNA hybridization detection. Interestingly, having a greater DNA probe dispersion in the 3D matrix does not induce a higher DNA hybridization efficiency. In a study of protein binding to immobilized DNA (estrogen receptor to estrogen response elements), aiming at assessing the DNA sequence dependent protein binding behavior, the 2D and 3D chips produce different binding characteristics. On the 2D chip, the protein binding exhibits a better selectivity to the specific sequences, regardless of binding stringency (e.g. salt concentration), whereas on the 3D chip, the liquid handling system needs to be optimized in order to minimize transport limitations and to detect small affinity differences. Through this study we demonstrate that the physicochemical structure of SPR chips affects the apparent binding behaviors of biomolecules. When interpreting SPR binding curves and selecting a sensor chip, these effects should be taken into account.
"Smart" DNA interfaces Tjong, Vinalia; Tang, Lei; Zauscher, Stefan ...
Chemical Society reviews,
03/2014, Letnik:
43, Številka:
5
Journal Article
Recenzirano
This review focuses on surface-grafted DNA, and its use as a molecular building block that exploits its unique properties as a directional (poly)anion that exhibits molecular recognition. The ...selected examples highlight innovative applications of DNA at surfaces and interfaces ranging from molecular diagnostics and sequencing to biosensing.
We report the first demonstration of surface-initiated enzymatic polymerization (SIEP) for the direct detection of RNA in a fluorescence microarray format. This new method incorporates multiple ...fluorophores into an RNA strand using the two-step sequential and complementary reactions catalyzed by yeast poly(A) polymerase (PaP) to incorporate deoxyadenosine triphosphate (dATP) at the 3'-OH of an RNA molecule, followed by terminal deoxynucleotidyl transferase (TdT) to catalyze the sequential addition of a mixture of natural and fluorescent deoxynucleotides (dNTPs) at the 3'-OH of an RNA-DNA hybrid. We found that the 3'-end of RNA can be efficiently converted into DNA (∼50% conversion) by polymerization of dATP using yeast PaP, and the short DNA strand appended to the end of the RNA by PaP acts as the initiator for the TdT-catalyzed polymerization of longer DNA strands from a mixture of natural and fluorescent dNTPs that contain up to ∼45 Cy3 fluorophores per 1 kb DNA. We obtained an ∼2 pM limit of detection (LOD) and a 3 log-linear dynamic range for hybridization of a short 21 base-long RNA target to an immobilized peptide nucleic acid probe, while fragmented mRNA targets from three different full length mRNA transcripts yielded a ∼10 pM LOD with a similar dynamic range in a microarray format.
High molecular weight ssDNA amphiphiles are synthesized by enzymatic polymerization. These highly asymmetric diblock DNA copolymers self‐assemble into “hairy”, star‐like micelles, shown in the AFM ...image and the DPD snapshot.
Creative design: An approach to preparing mixed monolayers of thiolated single‐stranded DNA (ssDNA) and oligo(ethylene glycol)s (OEG‐AT) in a broad range of compositions as well as ssDNA/OEG‐AT ...patterns of any required shape (see top figure) has been shown. A combination of this approach with surface‐initiated enzymatic polymerization allows complex 3D DNA nanostructures to be sculpted with high spatial precision (bottom).
We used a combination of synchrotron-based X-ray photoelectron spectroscopy (XPS) and angle-resolved near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to study the chemical integrity, ...purity, and possible internal alignment of single-strand (ss) adenine deoxynucleotide (poly(A)) DNA brushes. The brushes were synthesized by surface-initiated enzymatic polymerization (SIEP) on a 25-mer of adenine self-assembled monolayer (SAM) on gold (A25-SH), wherein the terminal 3'-OH of the A25-SH serve as the initiation sites for SIEP of poly(A). XPS and NEXAFS spectra of poly(A) brushes were found to be almost identical to those of A25-SH initiator, with no unambiguous traces of contamination. Apart from the well-defined chemical integrity and contamination-free character, the brushes were found to have a high degree of orientational order, with an upright orientation of individual strands, despite their large thickness up to ~55 nm, that corresponds to a chain length of at least several hundred nucleotides for individual ssDNA molecules. The orientational order exhibited by these poly(A) DNA brushes, mediated presumably by base stacking, was found to be independent of the brush thickness as long as the packing density was high enough. The well-defined character and orientational ordering of the ssDNA brushes make them a potentially promising system for different applications.
Biodegradable stent prototypes were produced from poly
l-lactic acid polymers with different molecular weights. The effects of molecular weight, drug incorporation and stent design on the collapse ...pressure of the stents were evaluated. While molecular weights did not show a significant effect on the collapse pressure of the stents, drug incorporation at high percentage decreased the collapse pressure of the stents substantially. Cryogenic fracture surfaces showed significant drug agglomeration as the concentration increased. The design of the stent was also found to a have significant effect on the collapse pressure. The stent produced from the same material has a higher collapse pressure when the load bearing surface area is increased.
Current techniques for nucleic acid analysis often involve extensive sample preparation that requires skilled personnel and multiple purification steps. In this dissertation, we introduce an on-chip, ...isothermal, post-hybridization labeling and signal amplification technique that can directly interrogate unmodified DNA and RNA samples on a microarray format, eliminating the need for microarray sample pre-processing. We name this technique Surface Initiated Enzymatic Polymerization (SIEP), where we exploit the ability of a template independent DNA polymerase called Terminal Deoxynucleotidyl Transferase (TdT) to catalyze the formation of long single-stranded DNA (ssDNA) chain from the 3'-end of a short DNA primer, which is tethered on the surface, and TdT's ability to incorporate unnatural reporter nucleotides, such as fluorescent nucleotides. We hypothesize that polymerization of a long ssDNA chain while incorporating multiple fluorescent nucleotides on target DNA or RNA hybridized to probe printed on a surface will provide a simple and powerful, isothermal method for on-chip labeling and signal amplification. We developed the SIEP methodology by first characterizing TdT biochemical reaction to polymerize long homopolymer ssDNA (> 1000 bases) starting from the 3'-OH of ten bases oligonucleotides. We found that the preferred monomers (deoxynucleotide, dNTP) are dATP and dTTP, and that the length of the ssDNA extension is determined by the ratio of input monomer (dNTP) to initiator (short oligonucleotides). We also investigated TdT's ability to incorporate fluorescent dNTPs into a ssDNA chain by examining the effect of the molar ratios of fluorescent dNTP to natural dNTP on the initiation efficiency, the degree of fluorophore incorporation, the length and the polydispersity of the polymerized DNA strand. These experiments allowed us to incorporate up to ∼50 fluorescent Cy3-labeled dNTPs per kilobase into a ssDNA chain. With the goal of using SIEP as an on-chip labeling method, we also quantified TdT mediated signal amplification on the surface by immobilizing ssDNA oligonucleotide initiators on a glass surface followed by SIEP of DNA. The incorporation of multiple fluorophores into the extended DNA chain by SIEP translated to a up to ∼45 fold increase in signal amplification compared to the incorporation of a single fluorophore. SIEP was then employed to detect hybridization of DNA (25 bases), short miRNA (21 bases) and long mRNA (1400 bases) by the post-hybridization, on-chip polymerization of fluorescently labeled ssDNA that was grown from the 3'-OH of hybridized target strands. A dose-response curve for detection of DNA hybridization by SIEP was generated, with a ∼1 pM limit of detection (LOD) and a 2-log linear dynamic range while the detection of short miRNA and fragmented mRNA targets resulted in ∼2 pM and ∼10 pM LOD, respectively with a 3-log linear dynamic range. We further developed SIEP for colorimetric detection by exploiting the presence of negatively charged phosphate backbone on the surface as target DNA or RNA hybridizes on the immobilized probe. The net negative charge on the surface is further increased by TdT catalyzed polymerization of long ssDNA. We then used positively charged gold nanoparticles as reporters, which can be further amplified through electroless metallization, creating DNA spots that are visible by eye. We observed an increase of 100 fold in LOD due to SIEP amplification. Overall, we demonstrated the use of SIEP methodology to label unmodified target DNA and RNA on chip, which can be detected through fluorescence signal or colorimetric signal of metallized DNA spots. This methodology is straightforward and versatile, is compatible with current microarray technology, and can be implemented using commercially available reagents.
