Edible insects are expected to become an important nutrient source for animals and humans in the Western world in the near future. However, before insects can be put on the market, the safety of ...their use for feed and food is warranted. This literature study was prepared to provide an overview of the actual knowledge of possible food safety hazards, including chemical, microbiological, and allergenic agents and prions, to human and animal health upon the use of insects for food and feed, and to highlight data gaps and suggest the way forward. From the data available, heavy metals of concern are cadmium in black soldier fly and arsenic in yellow mealworm larvae. Investigated mycotoxins do not seem to accumulate. Residues of pesticides, veterinary drugs, and hormones, as well as dioxins and PCBs, are sometimes found in insects. Contamination of insects with pathogens to human health is a consequence of a combination of the substrates used and the farming and processing steps applied. Insects harbor a wide variety of microorganisms, and some human pathogenic bacteria may be present. In addition, insects may harbor and transmit parasites. There is no evidence so far insects may harbor pathogenic viruses or prions, but they may act as vectors. Insects and insect‐derived products may have allergenic potential. In this review, evidence on some safety aspects is displayed, and data gaps are identified. Recommendations are given for future research to fill the most relevant data gaps.
Novel protein sources (like insects, algae, duckweed, and rapeseed) are expected to enter the European feed and food market as replacers for animal‐derived proteins. However, food safety aspects of ...these novel protein sources are not well‐known. The aim of this article is to review the state of the art on the safety of major novel protein sources for feed and food production, in particular insects, algae (microalgae and seaweed), duckweed, and rapeseed. Potential hazards for these protein sources are described and EU legislative requirements as regard to food and feed safety are explained. Potential hazards may include a range of contaminants, like heavy metals, mycotoxins, pesticide residues, as well as pathogens. Some safety aspects of novel protein sources are intrinsic to the product, but many potential hazards can also be due to production methods and processing conditions. These aspects should be considered in advance during product development. European law is unclear on several issues regarding the use of novel protein sources in food and feed products. For food product applications, the most important question for food producers is whether or not the product is considered a novel food. One of the major unclarities for feed applications is whether or not products with insects are considered animal‐derived products or not. Due to the unclarities in European law, it is not always clear which Regulation and maximum levels for contaminants apply. For market introduction, European legislation should be adjusted and clarified.
The potential cross-contamination of pathogens between clean and contaminated produce in the washing tank is highly dependent on the water quality. Process wash water disinfectants are applied to ...maintain the water quality during processing. The review examines the efficacy of process wash water disinfectants during produce processing with the aim to prevent cross-contamination of pathogens. Process wash water disinfection requires short contact times so microorganisms are rapidly inactivated. Free chlorine, chlorine dioxide, ozone, and peracetic acid were considered suitable disinfectants. A disinfectant's reactivity with the organic matter will determine the disinfectant residual, which is of paramount importance for microbial inactivation and should be monitored in situ. Furthermore, the chemical and worker safety, and the legislative framework will determine the suitability of a disinfection technique. Current research often focuses on produce decontamination and to a lesser extent on preventing cross-contamination. Further research on a sanitizer's efficacy in the washing water is recommended at the laboratory scale, in particular with experimental designs reflecting industrial conditions. Validation on the industrial scale is warranted to better understand the overall effects of a sanitizer.
This study aimed to obtain insights into the presence of cadmium, lead, mercury and arsenic in feed materials and feed over time for the purpose of guiding national monitoring. Data from the Dutch ...feed monitoring programme and from representatives of the feed industry during the period 2007-13 were used. Data covered a variety of feed materials and compound feeds in the Netherlands. Trends in the percentage of samples that exceeded the maximum limit (ML) set by the European Commission, and trends in average, median and 90th percentile concentrations of each of these elements were investigated. Based on the results, monitoring should focus on feed material of mineral origin, feed material of marine origin, especially fish meal, seaweed and algae, as well as feed additives belonging to the functional groups of (1) trace elements (notably cupric sulphate, zinc oxide and manganese oxide for arsenic) and (2) binders and anti-caking agents. Mycotoxin binders are a new group of feed additives that also need attention. For complementary feed it is important to make a proper distinction between mineral and non-mineral feed (lower ML). Forage crops in general do not need high priority in monitoring programmes, although for arsenic grass meal still needs attention.
The refining of vegetable oils leads to the formation of 2‐ and 3‐monochloropropane‐1,2‐diol esters (2‐ and 3‐MCPD‐E), and glycidyl esters (Gly‐E). A literature review was performed aiming to provide ...up‐to‐date knowledge on mitigation strategies during oil refining that can reduce the formation of these three processing contaminants. The review used the database Scopus and covered the period from 2009 to 2017. Most of the 18 papers dealt with palm oil and two papers with vegetable oil. Most studies focused on 3‐MCPD‐E, some on Gly‐E, and none on 2‐MCPD‐E. Water degumming was able to reduce the concentrations of 3‐MCPD‐E by 84% and Gly‐E by 26%. Neutralization of the oil reduced concentrations of 3‐MCPD‐E by 81% and Gly‐E by 84%. Bleaching with synthetic magnesium silicate reduced the 3‐MCPD‐E concentration by 67%. For the deodorization step, several mitigation strategies, such as double‐deodorization, the addition of various antioxidants, or a longer deodorization time, can reduce the formations of 3‐MCPD‐E by 82% and Gly‐E by 78%. Postrefining mitigation, including the use of absorbents, enzymes, or rebleaching of the oil, has also been reported to produce desirable contaminant reduction. Postrefining treatment with calcinated zeolite was able to reduce the 3‐MCPD‐E concentration by 19% and the Gly‐E concentration by 77%. Applying combined mitigation strategies to multiple steps of oil refining is likely crucial in order to adequately reduce levels of 3‐MCPD‐E and Gly‐E.
Insects have potential as a novel source of protein in feed and food production in Europe, provided they can be used safely. To date, limited information is available on the safety of insects, and ...toxic elements are one of the potential hazards of concern. Therefore, we aimed to investigate the potential accumulation of cadmium, lead and arsenic in larvae of two insect species, Tenebrio molitor (yellow mealworm) and Hermetia illucens (black soldier fly), which seem to hold potential as a source of food or feed. An experiment was designed with 14 treatments, each in triplicate, per insect species. Twelve treatments used feed that was spiked with cadmium, lead or arsenic at 0.5, 1 and 2 times the respective maximum allowable levels (ML) in complete feed, as established by the European Commission (EC). Two of the 14 treatments consisted of controls, using non-spiked feed. All insects per container (replicate) were harvested when the first larva in that container had completed its larval stage. Development time, survival rates and fresh weights were similar over all treatments, except for development time and total live weight of the half of the maximum limit treatment for cadmium of the black soldier fly. Bioaccumulation (bioaccumulation factor > 1) was seen in all treatments (including two controls) for lead and cadmium in black soldier fly larvae, and for the three arsenic treatments in the yellow mealworm larvae. In the three cadmium treatments, concentrations of cadmium in black soldier fly larvae are higher than the current EC maximum limit for feed materials. The same was seen for the 1.0 and 2.0 ML treatments of arsenic in the yellow mealworm larvae. From this study, it can be concluded that if insects are used as feed materials, the maximum limits of these elements in complete feed should be revised per insect species.
This study aimed to investigate the potential accumulation of mycotoxins in the lesser mealworm (
LMW) and black soldier fly (
BSF) larvae. Feed was spiked with aflatoxin B₁, deoxynivalenol (DON), ...ochratoxin A or zearalenone, and as a mixture of mycotoxins, to concentrations of 1, 10, and 25 times the maximum limits set by the European Commission for complete feed. This maximum limit is 0.02 mg/kg for aflatoxin B₁, 5 mg/kg for DON, 0.5 mg/kg for zearalenone and 0.1 mg/kg for ochratoxin A. The mycotoxins and some of their metabolites were analysed in the larvae and residual material using a validated and accredited LC-MS/MS-based method. Metabolites considered were aflatoxicol, aflatoxin P₁, aflatoxin Q₁, and aflatoxin M₁, 3-acetyl-DON, 15-acetyl-DON and DON-3-glycoside, and α- and β-zearalenol. No differences were observed between larvae reared on mycotoxins individually or as a mixture with regards to both larvae development and mycotoxin accumulation/excretion. None of the mycotoxins accumulated in the larvae and were only detected in BSF larvae several orders of magnitude lower than the concentration in feed. Mass balance calculations showed that BSF and LMW larvae metabolized the four mycotoxins to different extents. Metabolites accounted for minimal amounts of the mass balance, except for zearalenone metabolites in the BSF treatments, which accounted for an average maximum of 86% of the overall mass balance. Both insect species showed to excrete or metabolize the four mycotoxins present in their feed. Hence, safe limits for these mycotoxins in substrates to be used for these two insect species possibly could be higher than for production animals. However, additional analytical and toxicological research to fully understand the safe limits of mycotoxins in insect feed, and thus the safety of the insects, is required.
Machine learning (ML) has proven to be a useful technology for data analysis and modeling in a wide variety of domains, including food science and engineering. The use of ML models for the monitoring ...and prediction of food safety is growing in recent years. Currently, several studies have reviewed ML applications on foodborne disease and deep learning applications on food. This article presents a literature review on ML applications for monitoring and predicting food safety. The paper summarizes and categorizes ML applications in this domain, categorizes and discusses data types used for ML modeling, and provides suggestions for data sources and input variables for future ML applications. The review is based on three scientific literature databases: Scopus, CAB s, and IEEE. It includes studies that were published in English in the period from January 1, 2011 to April 1, 2021. Results show that most studies applied Bayesian networks, Neural networks, or Support vector machines. Of the various ML models reviewed, all relevant studies showed high prediction accuracy by the validation process. Based on the ML applications, this article identifies several avenues for future studies applying ML models for the monitoring and prediction of food safety, in addition to providing suggestions for data sources and input variables.
Salmonella spp. control in pork supply chains has always been a challenging issue and insufficient control can lead to high social and economic consequences. Conventional risk management and risk ...management approaches and models are not sufficient to address potential food safety shocks caused by Salmonella spp., as they mainly focus on assessing measures to reduce Salmonella spp. risks instead of developing the resilience capability (e.g., flexibility to adapt to sudden changes in the risks). Our study is the first that incorporated the resilience concept to the quantitative modeling of Salmonella spp. spread in the pork supply chain. The objective of this study was to explore the resilience performance of the pork supply chain under different food safety shocks caused by Salmonella spp., and to investigate the effectiveness of interventions on reducing the impact of these shocks on the resilience performance of the chain. Scenario analysis indicated that the effectiveness of the investigated resilience strategies or interventions depended on the risk profile (i.e., default, minimum, maximum level of Salmonella spp. contamination) of the pork supply chain. For pork supply chains with minimum and default risk profiles, more attention should be paid to increasing resilience of pigs towards Salmonella spp. infection. For supply chains with maximum risk profile, the focus should be on improving the performance of the slaughterhouse, such as careful evisceration, logistic slaughtering. To conclude, enhancing resilience performance of the pork supply chain can contribute to a safe pork supply.
•Acrylamide and HMF formation in 4 biscuit types baked at 200°C was studied.•Kinetic modelling of acrylamide and HMF formation in the baked biscuits was applied.•The “Acrylamide toolbox 2013” is not ...valid for the role of asparagine in the baked biscuits.
This study investigated acrylamide and 5-hydroxymethylfurfural (HMF) formation during biscuit baking. Four types of wheat flour with different molar ratios of total fructose and glucose to asparagine were investigated. Nevertheless, the molar ratio in all four biscuit doughs exceeded one after proofing due to enzyme action. Data obtained after baking were used to develop a mechanistic model, based on the asparagine-related pathway, for acrylamide and HMF formation in the four baked biscuit types. Asparagine reacted with fructose to form a Schiff base before decarboxylation to produce acrylamide without Amadori rearrangement product and sugar fragmentation. Fructose contributed considerably to acrylamide formation and to HMF formation via caramelization in all four biscuit types. No clear correlation was found between acrylamide and HMF in baked biscuits, nor between asparagine and the sum of glucose and fructose concentrations in the wheat flour.