Graphene-covering is a promising approach for achieving an acid-stable, non-noble-metal-catalysed hydrogen evolution reaction (HER). Optimization of the number of graphene-covering layers and the ...density of defects generated by chemical doping is crucial for achieving a balance between corrosion resistance and catalytic activity. Here, we investigate the influence of charge transfer and proton penetration through the graphene layers on the HER mechanisms of the non-noble metals Ni and Cu in an acidic electrolyte. We find that increasing the number of graphene-covering layers significantly alters the HER performances of Ni and Cu. The proton penetration explored through electrochemical experiments and simulations reveals that the HER activity of the graphene-covered catalysts is governed by the degree of proton penetration, as determined by the number of graphene-covering layers.
In the present study, we demonstrated a new concept for the direct electrochemical hydrogenation of toluene using an acidic microemulsion electrolyte with active Pt electrodes to pave the way for ...efficient methylcyclohexane mass production. We have achieved a Faradaic efficiency of 80% for the toluene/methylcyclohexane conversion at a Pt black electrode, under galvanostatic conditions and in a one-compartment cell. The reaction rate and selectivity of the toluene reduction were found to depend strongly on the surface structure of the Pt electrodes.
Display omitted
•We demonstrated the direct electrochemical hydrogenation of toluene in a microemulsion solution.•We achieved a Faradaic efficiency of 80% for the toluene conversion at a Pt black electrode.•The reaction rate and selectivity depend strongly on the surface structure of Pt electrodes.
CO tolerance at pure Pt, Pt-Co, and Pt-Ru alloys was investigated by X-ray photoelectron spectroscopy combined with an electrochemical cell (EC-XPS) in order to discover a hint for designing higher ...performance anode catalysts. After the electrochemical stabilization and/or CO adsorption, these electrodes were immediately transferred to the XPS chamber without exposure to air to avoid contamination of the surfaces. It was revealed that alloying with Co or Ru modified the electronic structures of Pt atoms, resulting in a positive core level (CL) shift of Pt 4f(7/2) which could weaken the Pt-CO interaction. For the Pt-Co alloy electrode, the Pt 4f(7/2) CL shift remained after the electrochemical stabilization despite Co dissolution and formation of a Pt skin layer. Changes in surface core level shifts (DeltaSCLSs) induced by CO adsorption were evaluated and related to the CO adsorption energy. The values of DeltaSCLS at these alloys were smaller than that of pure Pt, indicating that Ru and Co are effective elements to weaken the bond strength of Pt-CO.
We have positively identified oxygen species on Pt(111) single-crystal and polycrystalline Pt electrodes in N2-purged 0.1 M HF solution by X-ray photoelectron spectroscopy combined with an ...electrochemical cell. Four oxygen species (Oad, OHad, and two types of water molecules) were distinguished. The binding energies of each species were nearly constant over the whole potential region and independent of the single- or polycrystalline electrodes. The coverages, however, varied considerably and were dependent on the electrode potential. We have for the first time demonstrated clear differences in the surface oxidation processes for Pt(111) and polycrystalline Pt electrodes.
Carbon‐based metal‐free catalysts for the hydrogen evolution reaction (HER) are essential for the development of a sustainable hydrogen society. Identification of the active sites in heterogeneous ...catalysis is key for the rational design of low‐cost and efficient catalysts. Here, by fabricating holey graphene with chemically dopants, the atomic‐level mechanism for accelerating HER by chemical dopants is unveiled, through elemental mapping with atomistic characterizations, scanning electrochemical cell microscopy (SECCM), and density functional theory (DFT) calculations. It is found that the synergetic effects of two important factors—edge structure of graphene and nitrogen/phosphorous codoping—enhance HER activity. SECCM evidences that graphene edges with chemical dopants are electrochemically very active. Indeed, DFT calculation suggests that the pyridinic nitrogen atom could be the catalytically active sites. The HER activity is enhanced due to phosphorus dopants, because phosphorus dopants promote the charge accumulations on the catalytically active nitrogen atoms. These findings pave a path for engineering the edge structure of graphene in graphene‐based catalysts.
Edge engendering of holey graphene with the edge containing abundant chemical dopants can provide designable carbon‐based electrocatalysts for water splitting. The edge‐enhanced catalytically active sites facilitate hydrogen evolution reactions, directly confirmed by in situ electrochemical measurements with scanning electrochemical cell microscopy. The origin of the catalytic ability is also investigated by density functional theory.
We sought to establish a new standard for direct comparison of electrocatalytic activity with surface structure using in situ scanning tunneling microscopy (STM) by examining the electrooxidation of ...CO in a CO-saturated solution on Pt(111) electrodes with steps, with combined electrochemical measurements, in situ STM, and density functional theory (DFT). On pristine Pt(111) surfaces with initially disordered (111) steps, CO oxidation commences at least 0.5 V lower than that for the main oxidation peak at ca. 0.8-1.0 V vs the reversible hydrogen electrode in aqueous perchloric acid solution. As the potential was cycled between 0.07 and 0.95 V, the CO oxidation activity gradually decreased until only the main oxidation peak remained. In situ STM showed that the steps became perfectly straight. A plausible reason for the preference for (111) steps in the presence of CO is suggested by DFT calculations. In contrast, on a pristine Pt(111) surface with rather straight (100) steps, the low-potential CO oxidation activity was less than that for the pristine, uncycled (111) steps. As the potential was cycled, the activity also decreased greatly. Interestingly, after cycling, in situ STM showed that (111) microsteps were introduced at the (100) steps. Thus, potential cycling in the presence of dissolved CO highly favors formation of (111) steps. The CO oxidation activity in the low-potential region decreased in the following order: disordered (111) steps > straight (100) steps > (100) steps with local (111) microsteps ≈ straight (111) steps.
Bottom-up synthesis of porous NiMo alloy reduced by NiMoO4 nanofibers was systematically investigated to fabricate non-noble metal porous electrodes for hydrogen production. The different annealing ...temperatures of NiMoO4 nanofibers under hydrogen atmosphere reveal that the 950 °C annealing temperature is key for producing bicontinuous porous NiMo alloy without oxide phases. The porous NiMo alloy acts as a cathode in electrical water splitting, which demonstrates not only almost identical catalytic activity with commercial Pt/C in 1.0 M KOH solution, but also superb stability for 12 days at an electrode potential of −200 mV vs. reversible hydrogen electrode (RHE).
By the use of in situ scanning tunneling microscopy and surface X-ray scattering techniques, we have clarified the surface structure and the layer-by-layer compositions of a Pt skin/Pt3Co(111) ...single-crystal electrode, which exhibited extremely high activity for the oxygen reduction reaction. The topmost layer was found to be an atomically flat Pt skin with (1 × 1) structure. Cobalt was enriched in the second layer up to 98 atom %, whereas the Co content in the third and fourth layers was slightly smaller than that in the bulk. By X-ray photoelectron spectroscopy, the Co in the subsurface layers was found to be positively charged, which is consistent with an electronic modification of the Pt skin. The extremely high activity at the Pt skin/Pt3Co(111) single crystal is correlated with this specific surface structure.
PDF
