The oxygen reduction reaction (ORR) is one of the most important reactions in life processes and energy conversion systems. To alleviate global warming and the energy crisis, the development of ...high‐performance electrocatalysts for the ORR for application in energy conversion and storage devices such as metal–air batteries and fuel cells is highly desirable. Inspired by the biological oxygen activation/reduction process associated with heme‐ and multicopper‐containing metalloenzymes, iron and copper‐based transition‐metal complexes have been extensively explored as ORR electrocatalysts. Herein, an outline into recent progress on non‐precious‐metal electrocatalysts for the ORR is provided; these electrocatalysts do not require pyrolysis treatment, which is regarded as desirable from the viewpoint of bioinspired molecular catalyst design, focusing on iron/cobalt macrocycles (porphyrins, phthalocyanines, and corroles) and copper complexes in which the ORR activity is tuned by ligand variation/substitution, the method of catalyst immobilization, and the underlying supporting materials. Current challenges and exciting imminent developments in bioinspired ORR electrocatalysts are summarized and proposed.
An outline of recent progress on non‐precious‐metal electrocatalysts for the oxygen reduction reaction (ORR) is presented from the viewpoint of bioinspired molecular catalyst design, with a focus on iron/cobalt macrocycles and copper complexes in which the ORR activity is tuned by ligand modification, the method of catalyst immobilization, and the underlying supporting materials (see scheme).
This paper introduces series work of common-mode (CM) voltage reduction for the paralleled inverters. The paralleled inverters' phase-legs are connected through coupling inductors and the combined ...three-phase currents are provided to the load. Interleaving is an approach to reduce the CM voltage for the paralleled inverters but it cannot eliminate CM voltage. A novel pulse-width-modulation (PWM) method for paralleled inverters which can theoretically achieve zero CM voltage is developed. Considering the basic voltage vectors in each inverter, novel paralleled voltage vectors which have zero CM voltage are proposed to combine the reference voltage vector. The action time's distribution and voltage vectors' sending sequence for each inverter are also introduced. The proposed PWM method can make sure the voltage of the two inverters are balanced in each switching cycle and limits the circulating current through small coupling inductors. Similar to interleaving space vector PWM, the proposed zero CM PWM also has the ability to reduce the output current ripple and electromagnetic interference (EMI). Simulation and experimental results are provided to show the advantage of paralleled inverters in CM voltage reduction and validate the proposed method has good performance to reduce CM current and CM EMI noise.
Parallel control and management have been proposed as a new mechanism for conducting operations of complex systems, especially those that involved complexity issues of both engineering and social ...dimensions, such as transportation systems. This paper presents an overview of the background, concepts, basic methods, major issues, and current applications of Parallel transportation Management Systems (PtMS). In essence, parallel control and management is a data-driven approach for modeling, analysis, and decision-making that considers both the engineering and social complexity in its processes. The developments and applications described here clearly indicate that PtMS is effective for use in networked complex traffic systems and is closely related to emerging technologies in cloud computing, social computing, and cyberphysical-social systems. A description of PtMS system architectures, processes, and components, including OTSt, Dyna CAS, aDAPTS, iTOP, and TransWorld is presented and discussed. Finally, the experiments and examples of real-world applications are illustrated and analyzed.
Compared with the widely used constant switching frequency pulse-width-modulation (PWM) method, variable switching frequency PWM can benefit more because of the extra freedom. Based on the analytical ...expression of current ripple of three-phase converters, variable switching frequency control methods are proposed to satisfy different ripple requirements. Switching cycle T_{s} is updated in DSP in every interruption period based on the ripple requirement. Two methods are discussed in this paper. The first method is designed to arrange the current ripple peak value within a certain value and can reduce the equivalent switching frequency and electromagnetic interference (EMI) noise; the second method is designed to keep ripple current RMS value constant and reduce the EMI noise. Simulation and experimental results show that variable switching frequency control could improve the performance of EMI and efficiency without impairing the power quality.
Single‐crystalline cathode materials have attracted intensive interest in offering greater capacity retention than their polycrystalline counterparts by reducing material surfaces and phase ...boundaries. However, the single‐crystalline LiCoO2 suffers severe structural instability and capacity fading when charged to high voltages (4.6 V) due to Co element dissolution and O loss, crack formation, and subsequent electrolyte penetration. Herein, by forming a robust cathode electrolyte interphase (CEI) in an all‐fluorinated electrolyte, reversible planar gliding along the (003) plane in a single‐crystalline LiCoO2 cathode is protected due to the prevention of element dissolution and electrolyte penetration. The robust CEI effectively controls the performance fading issue of the single‐crystalline cathode at a high operating voltage of 4.6 V, providing new insights for improved electrolyte design of high‐energy‐density battery cathode materials.
Single‐crystalline cathode materials have attracted intensive interest. However, the single‐crystalline LiCoO2 suffers severe structural instability and capacity fading when charged to high voltages (4.6 V vs Li/Li+) due to Co and O element dissolution, crack formation, and electrolyte penetration. In this work, the above problems are inhibited by forming a robust cathode electrolyte interphase (CEI) on the surface of LiCoO2.
Briefing: An investigation and outline of MetaControl and DeControl in Metaverses for control intelligence and knowledge automation are presented. Prescriptive control with prescriptive knowledge and ...parallel philosophy is proposed as the starting point for the new control philosophy and technology, especially for computational control of metasystems in cyber-physical-social systems. We argue that circular causality, the generalized feedback mechanism for complex and purposive systems, should be adapted as the fundamental principle for control and management of metasystems with metacomplexity in metaverses. Particularly, an interdisciplinary approach is suggested for MetaControl and DeControl as a new form of intelligent control based on five control metaverses: Meta Verses, MultiVerses, InterVerses, TransVerse, and Deep Verses.
The increasing demand for replacing conventional fossil fuels with clean energy or economical and sustainable energy storage drives better battery research today. Sodium‐ion batteries (SIBs) are ...considered as a promising alternative for grid‐scale storage applications due to their similar “rocking‐chair” sodium storage mechanism to lithium‐ion batteries, the natural abundance, and the low cost of Na resources. Searching for appropriate electrode materials with acceptable electrochemical performance is the key point for development of SIBs. Layered transition metal oxides represent one of the most fascinating electrode materials owing to their superior specific capacity, environmental benignity, and facile synthesis. However, three major challenges (irreversible phase transition, storage instability, and insufficient battery performance) are known for cathodes in SIBs. Herein, a comprehensive review on the latest advances and progresses in the exploration of layered oxides for SIBs is presented, and a detailed and deep understanding of the relationship of phase transition, air stability, and electrochemical performance in layered oxide cathodes is provided in terms of refining the structure–function–property relationship to design improved battery materials. Layered oxides will be a competitive and attractive choice as cathodes for SIBs in next‐generation energy storage devices.
The recent progress in layered oxide cathodes for sodium‐ion batteries is comprehensively reviewed. Some new perspectives concentrating on phase transition, air stability, and electrochemical performance in layered cathodes are provided, in terms of refining the structure–function–property relationship to rationally design better electrode materials.
The hierarchical aggregation of molecular nanostructures from multiple components is a grand synthetic challenge, which requires highly selective linkage control. We demonstrate how two orthogonal ...linkage groups, that is, organotin and lanthanide cations, can be used to drive the aggregation of a giant molecular metal oxide superstructure. The title compound {(Sn(CH3)2)2O4{CeW5O18 TeW4O16CeSn(CH3)24TeW8O314}2}46− (1 a) features dimensions of ca. 2.2×2.3×3.4 nm3 and a molecular weight of ca. 25 kDa. Structural analysis shows the hierarchical aggregation from several independent subunits. Initial biomedical tests show that 1 features an inhibitory effect on the proliferation of HeLa cells based on an apoptosis pathway. In vivo experiments in mice reveal the antiproliferative activity of 1 and open new paths for further development of this new compound class.
Hierarchical assembly of a giant heterometallic polyoxotungstate supercluster with a molecular weight of ca. 25 kDa is reported. Geometrically unrestricted cerium(III) and geometrically restricted dimethyl tin cation linkers are used to gain access to a giant molecular species featuring three different polyoxometalate building units. The compound demonstrates in vitro and in vivo antiproliferative activity against HeLa cervical cancer cell lines.
Metallic lithium is the most competitive anode material for next‐generation lithium (Li)‐ion batteries. However, one of its major issues is Li dendrite growth and detachment, which not only causes ...safety issues, but also continuously consumes electrolyte and Li, leading to low coulombic efficiency (CE) and short cycle life for Li metal batteries. Herein, the Li dendrite growth of metallic lithium anode is suppressed by forming a lithium fluoride (LiF)‐enriched solid electrolyte interphase (SEI) through the lithiation of surface‐fluorinated mesocarbon microbeads (MCMB‐F) anodes. The robust LiF‐enriched SEI with high interfacial energy to Li metal effectively promotes planar growth of Li metal on the Li surface and meanwhile prevents its vertical penetration into the LiF‐enriched SEI from forming Li dendrites. At a discharge capacity of 1.2 mAh cm−2, a high CE of >99.2% for Li plating/stripping in FEC‐based electrolyte is achieved within 25 cycles. Coupling the pre‐lithiated MCMB‐F (Li@MCMB‐F) anode with a commercial LiFePO4 cathode at the positive/negative (P/N) capacity ratio of 1:1, the LiFePO4//Li@MCMB‐F cells can be charged/discharged at a high areal capacity of 2.4 mAh cm−2 for 110 times at a negligible capacity decay of 0.01% per cycle.
A dendrite‐free lithium (Li) metal anode for Li metal batteries (LMBs) is realized by using surface‐fluorinated mesocarbon microbeads (MCMB‐F) as substrate. During the lithiation process, the fluorinated graphite on the outermost surface of MCMB‐F is reduced in situ to form a robust lithium‐fluoride‐enriched solid electrolyte interphase, providing an efficient avenue for LMBs with high Li metal coulombic efficiency and no Li dendrite growth.
P2‐type layered oxides suffer from an ordered Na+/vacancy arrangement and P2→O2/OP4 phase transitions, leading them to exhibit multiple voltage plateaus upon Na+ extraction/insertion. The deficient ...sodium in the P2‐type cathode easily induces the bad structural stability at deep desodiation states and limited reversible capacity during Na+ de/insertion. These drawbacks cause poor rate capability and fast capacity decay in most P2‐type layered oxides. To address these challenges, a novel high sodium content (0.85) and plateau‐free P2‐type cathode‐Na0.85Li0.12Ni0.22Mn0.66O2 (P2‐NLNMO) was developed. The complete solid‐solution reaction over a wide voltage range ensures both fast Na+ mobility (10−11 to 10−10 cm2 s−1) and small volume variation (1.7 %). The high sodium content P2‐NLNMO exhibits a higher reversible capacity of 123.4 mA h g−1, superior rate capability of 79.3 mA h g−1 at 20 C, and 85.4 % capacity retention after 500 cycles at 5 C. The sufficient Na and complete solid‐solution reaction are critical to realizing high‐performance P2‐type cathodes for sodium‐ion batteries.
A high sodium content (0.85) and plateau‐free P2‐type cathode, Na0.85Li0.12Ni0.22Mn0.66O2, is developed for sodium‐ion batteries. The sodium content promises a large specific capacity of 123.4 mA h g−1 with an average working voltage as high as 3.5 V. The complete solid‐solution reaction over a wide voltage range ensures small volume variation (1.7 %) and fast Na+ kinetics (10−10 to 10−11 cm2 s−1), contributing to both excellent cycling stability and rate capability.
PDF
