The state is a key driver of corporate social responsibility across developed and developing countries. But the existing research provides comparatively little knowledge about: (1) how companies ...strategically manage the relationship with the state through corporate social responsibility (CSR); (2) how this strategy takes shape under the influence of political institutions. Understanding these questions captures a realistic picture of how a company applies CSR to interacting with the state, particularly in countries where the state relationship is critical to the business operation. This article draws on political legitimacy as a useful concept to directly address both strategic and politically embedded natures of CSR. This work extends the currently under-specified political implication of the strategic view of CSR and provides fresh insights to the political legitimacy research by specifying a typology of CSR-based legitimacy strategies and its contextual variation. China and Russia are the focal settings. A qualitative analysis of business—state interaction cases is done using a database that contains the majority of CSR reports published in Chinese and Russian as the end of 2009. As a result, this paper identifies four qualitatively different types of CSR-based political legitimacy strategies and reveals how the adoption of these strategies differs across Chinese companies, Russian companies, and multinational corporations.
Large scale synthesis and delamination of 2D Mo2CT
x
(where T is a surface termination group) has been achieved by selectively etching gallium from the recently discovered nanolaminated, ternary ...transition metal carbide Mo2Ga2C. Different synthesis and delamination routes result in different flake morphologies. The resistivity of free‐standing Mo2CT
x
films increases by an order of magnitude as the temperature is reduced from 300 to 10 K, suggesting semiconductor‐like behavior of this MXene, in contrast to Ti3C2T
x
which exhibits metallic behavior. At 10 K, the magnetoresistance is positive. Additionally, changes in electronic transport are observed upon annealing of the films. When 2 μm thick films are tested as electrodes in supercapacitors, capacitances as high as 700 F cm−3 in a 1 m sulfuric acid electrolyte and high capacity retention for at least 10,000 cycles at 10 A g−1 are obtained. Free‐standing Mo2CT
x
films, with ≈8 wt% carbon nanotubes, perform well when tested as an electrode material for Li‐ions, especially at high rates. At 20 and 131 C cycling rates, stable reversible capacities of 250 and 76 mAh g−1, respectively, are achieved for over 1000 cycles.
2D Mo2C (MXene) is produced using different synthesis routes, which lead to different flake morphologies. Mo2C exhibits a semiconductor‐like increase in resistivity from 300 to 10 K. Mo2C electrodes in a supercapacitor achieve 700 F cm−3 capacitance in 1 m H2SO4 for 10,000 cycles. Mo2C–Carbon nano tube (CNT) electrodes possess 250 mAh g−1 capacity for 1000 cycles, showing promise as anode for batteries and Li‐ion capacitors.
2D transition metal carbides and nitrides, named MXenes, are attracting increasing attentions and showing competitive performance in energy storage devices including electrochemical capacitors, ...lithium‐ and sodium‐ion batteries, and lithium–sulfur batteries. However, similar to other 2D materials, MXene nanosheets are inclined to stack together, limiting the device performance. In order to fully utilize MXenes' electrochemical energy storage capability, here, processing of 2D MXene flakes into hollow spheres and 3D architectures via a template method is reported. The MXene hollow spheres are stable and can be easily dispersed in solvents such as water and ethanol, demonstrating their potential applications in environmental and biomedical fields as well. The 3D macroporous MXene films are free‐standing, flexible, and highly conductive due to good contacts between spheres and metallic conductivity of MXenes. When used as anodes for sodium‐ion storage, these 3D MXene films exhibit much improved performances compared to multilayer MXenes and MXene/carbon nanotube hybrid architectures in terms of capacity, rate capability, and cycling stability. This work demonstrates the importance of MXene electrode architecture on the electrochemical performance and can guide future work on designing high‐performance MXene‐based materials for energy storage, catalysis, environmental, and biomedical applications.
Hollow Ti3C2Tx spheres and 3D macroporous MXene films are fabricated using a sacrificial template approach. The 3D MXene films are free‐standing, flexible, and highly conductive. They can serve directly as electrodes for Na‐ion storage and exhibit high capacities accompanied with excellent stabilities and rate performance.
2D Nb2CTx MXene flakes are produced using an amine‐assisted delamination process. Upon mixing with carbon nanotubes and filtration, freestanding, flexible paper is produced. The latter exhibits high ...capacity and excellent stability when used as the electrode for Li‐ion batteries and capacitors.
Lithium metal has been regarded as the future anode material for high-energy-density rechargeable batteries due to its favorable combination of negative electrochemical potential and high theoretical ...capacity. However, uncontrolled lithium deposition during lithium plating/stripping results in low Coulombic efficiency and severe safety hazards. Herein, we report that nanodiamonds work as an electrolyte additive to co-deposit with lithium ions and produce dendrite-free lithium deposits. First-principles calculations indicate that lithium prefers to adsorb onto nanodiamond surfaces with a low diffusion energy barrier, leading to uniformly deposited lithium arrays. The uniform lithium deposition morphology renders enhanced electrochemical cycling performance. The nanodiamond-modified electrolyte can lead to a stable cycling of lithium | lithium symmetrical cells up to 150 and 200 h at 2.0 and 1.0 mA cm
, respectively. The nanodiamond co-deposition can significantly alter the lithium plating behavior, affording a promising route to suppress lithium dendrite growth in lithium metal-based batteries.Lithium metal is an ideal anode material for rechargeable batteries but suffer from the growth of lithium dendrites and low Coulombic efficiency. Here the authors show that nanodiamonds serve as an electrolyte additive to co-deposit with lithium metal and suppress the formation of dendrites.
The combination of one‐dimensional and two‐dimensional building blocks leads to the formation of hierarchical composites that can take full advantages of each kind of material, which is an effective ...way for the preparation of multifunctional materials with extraordinary properties. Among various building blocks, nanocarbons (e.g., carbon nanotubes and graphene) and layered double hydroxides (LDHs) are two of the most powerful materials that have been widely used in human life. This Feature Article presents a state‐of‐the‐art review of hierarchical nanocomposites derived from nanocarbons and LDHs. The properties of nanocarbons, LDHs, as well as the combined nanocomposites, are described first. Then, efficient and effective fabrication methods for the hierarchical nanocomposites, including the reassembly of nanocarbons and LDHs, formation of LDHs on nanocarbons, and formation of nanocarbons on LDHs, are presented. The as‐obtained nanocomposites derived form nanocarbons and LDHs exhibited excellent performance as multifunctional materials for their promising applications in energy storage, nanocomposites, catalysis, environmental protection, and drug delivery. The fabrication of LDH/carbon nanocomposites provides a novel method for the development of novel multifunctional nanocomposites based on the existing nanomaterials. However, knowledge of their assembly mechanism, robust and precise route for LDH/nanocarbon hybrid with well designed structure, and the relationship between structure, properties, and applications are still inadequate. A multidisciplinary approach from the scope of materials, physics, chemistry, engineering, and other application areas, is highly required for the development of this advanced functional composite materials.
Hierarchical nanocomposites derived from nanocarbons and layered double hydroxides, representing the latest frontier for arrangement and construction of different low‐dimensional nanomaterials as building blocks, are reviewed. The article highlights the fabrication of novel hierarchical nanoarchitectures via bottom‐up self‐organization and their promising applications in energy storage, materials science, catalysis, environmental protection, and drug delivery, with a focus on hot topics and future challenges in this field.
Engineering electrode nanostructures is critical in developing high‐capacity, fast rate‐response, and safe Li‐ion batteries. This study demonstrates the synthesis of orthorhombic Nb2O5@Nb4C3Tx (or ...@Nb2CTx) hierarchical composites via a one‐step oxidation —in flowing CO2 at 850 °C —of 2D Nb4C3Tx (or Nb2CTx) MXene. The composites possess a layered architecture with orthorhombic Nb2O5 nanoparticles decorated uniformly on the surface of the MXene flakes and interconnected by disordered carbon. The composites have a capacity of 208 mAh g−1 at a rate of 50 mA g−1 (0.25 C) in 1–3 V versus Li+/Li, and retain 94% of the specific capacity with 100% Coulombic efficiency after 400 cycles. The good electrochemical performances could be attributed to three synergistic effects: (1) the high conductivity of the interior, unoxidized Nb4C3Tx layers, (2) the fast rate response and high capacity of the external Nb2O5 nanoparticles, and (3) the electron “bridge” effects of the disordered carbon. This oxidation method was successfully extended to Ti3C2Tx and Nb2CTx MXenes to prepare corresponding composites with similar hierarchical structures. Since this is an early report on producing this structure, there is much room to push the boundaries further and achieve better electrochemical performance.
The oxidation of Nb4C3Tx MXene in CO2 results in a hierarchical T‐Nb2O5@Nb4C3Tx layered composite, that combines the high capacity of the external orthorhombic T‐Nb2O5, coupled with the high electrical conductivity of the interior unoxidized Nb4C3Tx and the electron bridge effect of the disordered carbon. This composite exhibits high capacity at high rate when used as Li‐ion battery anode.
Free‐standing and flexible sandwich‐like MXene/carbon nanotube (CNT) paper, composed of alternating MXene and CNT layers, is fabricated using a simple filtration method. These sandwich‐like papers ...exhibit high volumetric capacitances, good rate performances, and excellent cycling stability when employed as electrodes in supercapacitors.