One of the friction-stir welding (FSW) limitations is joining thin sheets in sheet-metal manufacturing. To solve this limitation, thicker sheets can be welded with FSW and then rolled to a thinner ...thickness. This can improve the mechanical properties and save the weld zone soundly. In this work, 3-mm aluminum sheets were joined with FSW. The microstructure and mechanical properties of the samples were assessed at various rotational speeds (w) and travel speeds (v). Then, the welded samples were cold worked (CW) by rolling them at different percentages so that the samples were 2 mm and 1 mm thick. The effects of welding and post rolling on the mechanical properties and a failure analysis were deliberated. It was shown that welding reduces the transverse ultimate tensile strength (UTS) of FSWed samples by up to 29 % compared to the UTS of the base metal (BM), while rolling FSWed samples increased the UTS of the cold-worked FSWed samples by up to 94.7 % in comparison to the UTS of FSWed samples. Also, during the tensile test of the specimens FSWed at a lower travel speed, a fracture occurred at the stir zone (SZ)/thermo-mechanically affected zone (TMAZ) interface, on the advancing part; however, at a higher travel speed, it occurred at the interface of the heat-affected zone (HAZ) and TMAZ, on the retreating part. Moreover, during the tensile test of the cold-worked FSWed samples, the failure took place at the HAZ and the interface of the SZ and TMAZ, respectively. The UTS was risen by increasing the cold work. The UTS of a specimen FSWed at 50 mm/min and 1200 min–1 went up from 76 MPa to 124 MPa due to 33-% cold work and to 148 MPa due to 66-% cold work; meanwhile, the fracture occurred at the SZ/TMAZ interface or TMAZ of most of the post-rolled FSWed samples.
V članku avtorica analizira in ovrednoti dva zgleda razčlenjevalnih meril za ocenjevanje razlagalnih/utemeljevalnih sestavkov, in sicer Meril Holly L. Jacobs et al. (1981) in Navodil za ocenjevanje ...Vicki Spandlove et al. (1990). Avtorica prispevka je obravnavana merila izbrala zato, ker so med učitelji in učiteljicami še vedno zelo priljubljena. Pri pretresanju dobrih in slabih plati meril se osredotoča na lastnosti opisnikov. V skladu s priporočili Splošnega evropskega jezikovnega okvira/SEJO (2001: 205–207) ugotavlja, do kakšne mere so dorečeni, jasni, kratki in neodvisni. Analiza razkriva, koliko sta si zgleda meril podobna in v čem se razlikujeta, obravnava njune dobre in šibke plati in pripelje do zaključka, da bi učitelji in učiteljice morali navodila za ocenjevanje kritično ovrednotiti, po potrebi izboljšati in prilagoditi izobraževalnemu kontekstu, v katerem delujejo, preden jih začnejo uporabljati.
The objective of this work was to study the suitability of three types of cast iron for the manufacture of a ship engine: EN-GJS-500-7U for the manufacture of the engine block, EN-GJS-400-15U for the ...cylinder head and EN-GJL-200 for the liner. Tensile tests were carried out to obtain the ultimate tensile strength (UTS) of each material. The results for the UTS were: 460 MPa for EN-GJS-500-7U, 390 MPa for EN-GJS-400-15U and 170 MPa for EN-GJL-200. Likewise, Brinell-hardness measurements were carried out and the elements present in the materials were determined with spectrometry. Finally, the size of graphite particles in each sample was determined.
Translations of instruments for measuring quality of life developed in certain, mostly more developed, parts of the world usually do not cover regionally specific aspects of health-related quality of ...life, even after transcultural validation. The aim of this study was to develop and validate a reliable questionnaire in Serbian, Croatian, Bosnian, and Montenegrin languages suitable for measuring health-related quality of life in adults.
The study was of a cross-sectional type, assessing the reliability and validity of a newly developed questionnaire for measuring health-related quality of life (HRQoL) in adults residing in western Balkan states (WB-HRQoL). It was conducted on a sample of 489 adults from Serbia, Croatia, Bosnia & Herzegovina, and Montenegro, with a mean age of 52.2±14.4 years and a male/female ratio of 195/294 (39.9%/60.1%).
The definitive version of the WB-HRQoL scale with 19 items showed very good reliability, with Cronbach's alpha 0.905. The scale was temporally stable, and satisfactory results were obtained for divergent and convergent validity tests. Exploratory factorial analysis brought to the surface four domains of health-related quality of life, namely the physical, psychical, social, and environmental.
The WB-HRQoL scale is a reliable and valid generic instrument for measuring HRQoL that takes into account the cultural specifics of the western Balkan region.
Traumatic experience in childhood or adolescence has a significant impact on the development of chronic mental and physical conditions in adulthood. Thus, it is very important for health ...professionals, especially primary care physicians to have an inventory in order to detect early trauma for planning appropriate treatment, such as the Early Trauma Inventory (ETI). The aim of this paper is to test the psychometric properties of the Slovenian translation of the short, self-rated version (ETISR-SF), and to further validate the instrument.
The research was done in two parts - qualitative and quantitative. In the qualitative part, a questionnaire was translated and culturally adapted using the Delphi method. For the quantitative part, 51 patients with substance use disorders hospitalized at the Centre for the Treatment of Drug Addictions were recruited, along with 133 controls. The psychometric properties of the questionnaire were checked. Internal consistency was calculated using Cronbach's alpha, test-retest reliability was examined graphically using a Bland-Altman plot. Discriminant validity between groups was gauged using the independent samples t-test.
Consensus in the Delphi study was reached in the second round. Cronbach's alpha varied between 0.60 - 0.85. Of the four domains, physical abuse had the lowest Cronbach's alpha. The test-retest reliability is high for all domains, with correlation coefficients ranging from 0.82 to 0.96. The non-clinical sample differed significantly from the clinical sample.
The Slovenian translation of ETISR-SF is a satisfactory instrument for the evaluation of trauma before the age of 18.