Hierarchical organization plays an important role in the stunning physical properties of natural and synthetic composites. Limits on the physical properties of such composites are generally defined ...by percolation theory and can be systematically altered using the volumetric filler fraction of the inorganic/organic phase. In natural composites, organic materials such as proteins that interact with inorganic filler materials can further alter the hierarchical order and organization of the composite
topological interactions, expanding the limits of the physical properties defined by percolation theory. However, existing polymer systems do not offer a topological parameter that can systematically modulate the assembly characteristics of composites. Here, we present a composite based on proteins and titanium carbide (Ti
C
T
) MXene that manifests a topological network that regulates the organization, and hence physical properties, of these biomimetic composites. We designed, recombinantly expressed, and purified synthetic proteins consisting of polypeptides with repeating amino acid sequences (tandem repeats) that have the ability to self-assemble into topologically networked biomaterials. We demonstrated that the interlayer distance between MXene sheets can be controlled systematically by the number of tandem repeat units. We varied the filler fraction and number of tandem repeat units to regulate the in-plane and out-of-plane electrical conductivities of these composites. Once Ti
C
T
MXene sheets are separated enough to facilitate formation of cross-links in our proteins with the number of tandem repeat units reaching 11, the linear
characteristics of the composites switched into nonlinear
curves with a distinct hysteresis for out-of-plane electron transport, while the in-plane
characteristics remained linear. This highlights the impact of synthetic protein templates, which can be designed to modulate electronic transport in composites both isotropically and anisotropically.
Conducting polymers (CPs) find applications in energy conversion and storage, sensors, and biomedical technologies once processed into thin films. Hydrophobic CPs, like ...poly(3,4-ethylenedioxythiophene) (PEDOT), typically require surfactant additives, such as poly(styrenesulfonate) (PSS), to aid their aqueous processability as thin films. However, excess PSS diminishes CP electrochemical performance, biocompatibility, and device stability. Here, we report the electrosynthesis of PEDOT thin films at a polarized liquid|liquid interface, a method nonreliant on conductive solid substrates that produces free-standing, additive-free, biocompatible, easily transferrable, and scalable 2D PEDOT thin films of any shape or size in a single step at ambient conditions. Electrochemical control of thin film nucleation and growth at the polarized liquid|liquid interface allows control over the morphology, transitioning from 2D (flat on both sides with a thickness of <50 nm) to "Janus" 3D (with flat and rough sides, each showing distinct physical properties, and a thickness of >850 nm) films. The PEDOT thin films were
-doped (approaching the theoretical limit), showed high π-π conjugation, were processed directly as thin films without insulating PSS and were thus highly conductive without post-processing. This work demonstrates that interfacial electrosynthesis directly produces PEDOT thin films with distinctive molecular architectures inaccessible in bulk solution or at solid electrode-electrolyte interfaces and emergent properties that facilitate technological advances. In this regard, we demonstrate the PEDOT thin film's superior biocompatibility as scaffolds for cellular growth, opening immediate applications in organic electrochemical transistor (OECT) devices for monitoring cell behavior over extended time periods, bioscaffolds, and medical devices, without needing physiologically unstable and poorly biocompatible PSS.
Exploration of high-performance aqueous ammonium-ions hybrid supercapacitor has attracted tremendous research attention recently. Herein, structural reconstructed cobalt-iron layered double ...hydroxides (SR-CoFe LDHs) featuring copious structure defects (i. e., oxygen-vacancies, M-O bonds, MOO
bonds, coexistence of Co
/Co
and Fe
/Fe
) are reported as a high-capacity cathode for NH
storage. The resulting SR-CoFe LDHs can deliver a reversible capacity of 167.9 mAh g
at 0.5 A g
, which is 3.3 folds higher than that of pristine CoFe-LDHs. Ex-situ experimental results and theoretical studies denote that the presence of structural defects in the CoFe-LDHs can lower the NH
adsorption energy and induced electron delocalization to enhance the electrical conductivity, rendering the CoFe-LDHs exhibits excellent performance for NH
storage. As a proof of concept, ammonium-ion hybrid supercapacitor has been assembled with CoFe-LDHs as the cathode and hierarchical carbon as the anode, which can deliver a large specific capacitance of 238.3 F g
, long cycle stability over 10000 cycles, and high energy density of 66.2 Wh kg
within a wide working voltage of 2 V. Overall, this work offers some insights into the design of high capacity cathode for aqueous NH
storage and also illustrates the construction of aqueous hybrid devices with NH
as the charge carrier.
Surface passivation is a general issue for Si-based photoelectrodes because it progressively hinders electron conduction at the semiconductor/electrolyte interface. In this work, we show that a ...sputtered 100 nm TiO(2) layer on top of a thin Ti metal layer may be used to protect an n(+)p Si photocathode during photocatalytic H(2) evolution. Although TiO(2) is a semiconductor, we show that it behaves like a metallic conductor would under photocathodic H(2) evolution conditions. This behavior is due to the fortunate alignment of the TiO(2) conduction band with respect to the hydrogen evolution potential, which allows it to conduct electrons from the Si while simultaneously protecting the Si from surface passivation. By using a Pt catalyst the electrode achieves an H(2) evolution onset of 520 mV vs NHE and a Tafel slope of 30 mV when illuminated by the red part (λ > 635 nm) of the AM 1.5 spectrum. The saturation photocurrent (H(2) evolution) was also significantly enhanced by the antireflective properties of the TiO(2) layer. It was shown that with proper annealing conditions these electrodes could run 72 h without significant degradation. An Fe(2+)/Fe(3+) redox couple was used to help elucidate details of the band diagram.
Hydrogen transport in solids, applied in electrochemical devices such as fuel cells and electrolysis cells, is key to sustainable energy societies. Although using proton (H
) conductors is an ...attractive choice, practical conductivity at intermediate temperatures (200-400 °C), which would be ideal for most energy and chemical conversion applications, remains a challenge. Alternatively, hydride ions (H
), that is, monovalent anions with high polarizability, can be considered a promising charge carrier that facilitates fast ionic conduction in solids. Here, we report a K
NiF
-type Ba-Li oxyhydride with an appreciable amount of hydrogen vacancies that presents long-range order at room temperature. Increasing the temperature results in the disappearance of the vacancy ordering, triggering a high and essentially temperature-independent H
conductivity of more than 0.01 S cm
above 315 °C. Such a remarkable H
conducting nature at intermediate temperatures is anticipated to be important for energy and chemical conversion devices.
MXene-based structural materials with high mechanical robustness and excellent electrical conductivity are highly desirable for multifunctional applications. The incorporation of macromolecular ...polymers has been verified to be beneficial to alleviate the mechanical brittleness of pristine MXene films. However, the intercalation of a large amount of insulating macromolecules inevitably compromises their electrical conductivity. Inspired by wood, short-chained hemicellulose (xylo-oligosaccharide) acts as a molecular binder to bind adjacent MXene nanosheets together; this work shows that this can significantly enhance the mechanical properties without introducing a large number of insulating phases. As a result, MXene-hemicellulose films can integrate a high electrical conductivity (64,300 S m
) and a high mechanical strength (125 MPa) simultaneously, making them capable of being high-performance electrode materials for supercapacitors and humidity sensors. This work proposes an alternative method to manufacture robust MXene-based structural materials for multifunctional applications.
The rapid development of consumer electronics, artificial intelligence, and clinical medicine generates an increasing demand for flexible pressure sensors, whose performance depends significantly on ...sensitive materials with high flexibility and proper conductivity. MXene, a type of 2D nanomaterial, has attracted extensive attention due to its good electrical conductivity, hydrophilicity, and flexibility. The synthesis methods for MXenes make it relatively easy to control their microstructure and surface termination groups. Hence, MXenes can obtain peculiar microstructures and facilely combine with other functional materials, making them promising prospects for use in flexible pressure sensors. In this Review, recent advances in MXenes are summarized, mainly focusing on the synthesis methods and their application in flexible pressure sensors. Finally, the challenges and potential solutions for future development are also discussed.
Transition metal dichalcogenides have attracted research interest over the last few decades due to their interesting structural chemistry, unusual electronic properties, rich intercalation chemistry ...and wide spectrum of potential applications. Despite the fact that the majority of related research focuses on semiconducting transition-metal dichalcogenides (for example, MoS2), recently discovered unexpected properties of WTe2 are provoking strong interest in semimetallic transition metal dichalcogenides featuring large magnetoresistance, pressure-driven superconductivity and Weyl semimetal states. We investigate the sister compound of WTe2, MoTe2, predicted to be a Weyl semimetal and a quantum spin Hall insulator in bulk and monolayer form, respectively. We find that bulk MoTe2 exhibits superconductivity with a transition temperature of 0.10 K. Application of external pressure dramatically enhances the transition temperature up to maximum value of 8.2 K at 11.7 GPa. The observed dome-shaped superconductivity phase diagram provides insights into the interplay between superconductivity and topological physics.
Topological materials Yan, Binghai; Zhang, Shou-Cheng
Reports on progress in physics,
09/2012, Letnik:
75, Številka:
9
Journal Article
Recenzirano
Recently, topological insulator materials have been theoretically predicted and experimentally observed in both 2D and 3D systems. We first review the basic models and physical properties of ...topological insulators, using HgTe and Bi(2)Se(3) as prime examples. We then give a comprehensive survey of topological insulators which have been predicted so far, and discuss the current experimental status.
PDF