Display omitted
•A novel water-soluble lignin-based N-P flame retardant was synthesized.•Modified wood showed good mechanical properties and dimensional stability.•Modified wood achieved a reduction ...of 56.8% in THR and 92.3% decrease in TSP.•The flame-retardant mechanism of modified wood has been revealed.
The development of effective and eco-friendly wood-based functional composites is crucial for maximizing the value of forest resources. In this paper, we propose a novel method for preparing an aqueous-phase flame retardant (MPUC) using carboxymethylation alkali lignin, phytic acid, and melamine-urea-glyoxal resin. This approach aims to manufacture modified wood (MW/MPUC) with exceptional flame-retardant and smoke-suppressing properties. The results from the cone calorimeter test indicate that the modified wood achieved a remarkable reduction of up to 56.8 % in total heat release and an impressive 92.3 % decrease in total smoke production. Furthermore, the limiting oxygen index increased significantly from 23.6 % (natural wood) to 41.5 % (MW/MPUC-2). Notably, all modified wood successfully passed the V-1 test for UL-94 flammability rating. Further, our investigation into the gas-phase products formed during pyrolysis and the condensed-phase system created after combustion has led us to propose potential flame-retardant mechanisms for these flame retardants. Moreover, modified wood had improved mechanical properties and dimensional stability than natural wood. In addition, we extended the application of MPUC-2 flame-retardant to other flammable materials and demonstrated its excellent flame-retardant properties. Thus, the proposed strategy provided a new approach for preparing wood-based flame-retardant composites with lignin-based N-P flame retardants.
The treatment of wood using in-situ polyesterification with citric acid and D-sorbitol (SCA) is a novel method for enhancing wood properties. This method can effectively improve the dimensional ...stability and biological durability of wood. However, achieving effective fixation of polyester in wood at lower curing temperatures has not been achieved. In this study, phytic acid was used to catalyze in-situ polyesterification of SCA. The autocatalytic reaction pattern of SCA polyesterification was elucidated through an investigation of the kinetics of the curing reaction. It was also confirmed that phytic acid reduces the curing temperature and activation energy of SCA. The investigation of polyesters revealed that phytic acid catalysis enhances the esterification degree and thermal stability of the polyester. Wood treated with SCA and 2%wt phytic acid exhibited a 44% reduction in polyester leaching. Moreover, it demonstrated high water resistance and dimensional stability, with water repellency efficiency of up to 33.8% and anti-swelling efficiency of up to 46.2%. Remarkably, it exhibited excellent flame retardancy, with an oxygen index of 33.1% and a 47.5% reduction in total heat release. The outstanding flame retardancy is attributed to the dual action of phytic acid in both the solid phase and gas phase.
Display omitted
•A whole biobased modification strategy for preparing highly water resistant and flame-retardant wood has been proposed.•Phytic acid catalyzes polyesterification and enhancing wood flame retardancy.•The reaction pattern of citric acid with D-sorbitol catalyzed by phytic acid has been revealed.
Wood has gained popularity as a building and decorative material due to its environmentally friendly and sustainable characteristics. Yet, its long maturation time poses a limitation on meeting the ...growing demand for wood products. This challenge has led to the plantation of fast-growing wood as an alternative solution. Unfortunately, the poor mechanical properties of fast-growing wood hinder its application. In this study, we developed novel densification-modified wood by combining alkali chemical pretreatment, cyclic impregnation, and mechanical hot-pressing techniques. Additionally, the response surface method was employed to rapidly determine the optimal preparation parameters, reducing the cost of preparation under various conditions. The optimized parameters resulted in densification-modified wood with a flexural strength and modulus of elasticity of 337.04 MPa and 27.43 GPa, respectively. Furthermore, the densified wood achieved excellent dimensional stability by reducing the water-absorbing thickness swelling to 1.15 % for 72-h water soaking. The findings indicated that the densification-modified wood possessed high tensile strength and elastic modulus, along with excellent dimensional stability. The proposed densified wood modification technology in this study offers new perspectives and design guidance for the application of outdoor engineering structures, energy-efficient buildings, and decorative materials.
Display omitted
•Alkaline lignin and DM resins were utilized to modify poplar fast-growing wood.•The materials used were green and environment friendly.•The DM-AL modified wood obviously increased ...dimensional stability.•The DM-AL modified wood with 12 %AL displayed excellent mechanical properties.•The DM-AL modified wood was found effective against decay fungus.
Fast-growing poplar wood was modified by using 1,3-dihydroxymethyl-4,5-dihydroxyethylideneurea (DM) and alkaline lignin (AL) to improve its mechanical properties and decay resistance. AL was first used in combination with DM for wood impregnation modification. The weight percent gain, dimensional stability, mechanical properties, decay resistance and microcosmic changes of all wood samples were evaluated systematically. The results indicated that the maximum weight percent gain and anti-swelling efficiency of poplar wood after modification with DM-AL reached 46.2 % and 52 %, respectively. Compared with the unmodified samples, the bending strength, modulus of elasticity and hardness of the wood samples modified with DM-AL increased by 40 % – 60 %. Notably, the impact strength of samples modified with DM-AL was 18–26 % higher than that of samples modified with DM only, which may be due to the fact that the AL macromolecules slowed down the infiltration of DM-AL into the wood cell walls. The decay resistance of optimal modified samples against the decay fungus was improved by ∼80 % compared with unmodified sample. Furthermore, scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) confirmed that DM-AL modifiers impregnated into wood cell lumens. Fourier transform infrared spectroscopy (FTIR) demonstrated that the DM resin crosslinked with wood cell walls and AL macromolecules. In general, this study provides a facile, low-cost and green method to improve the comprehensive performance of fast-growing poplar, including mechanical properties and decay resistance.
Trees, and their derivative products, have been used by societies around the world for thousands of years. Contemporary construction of tall buildings from timber, in whole or in part, suggests a ...growing interest in the potential for building with wood at a scale not previously attainable. As wood is the only significant building material that is grown, we have a natural inclination that building in wood is good for the environment. But under what conditions is this really the case? The environmental benefits of using timber are not straightforward; although it is a natural product, a large amount of energy is used to dry and process it. Much of this can come from the biomass of the tree itself, but that requires investment in plant, which is not always possible in an industry that is widely distributed among many small producers. And what should we build with wood? Are skyscrapers in timber a good use of this natural resource, or are there other aspects of civil and structural engineering, or large-scale infrastructure, that would be a better use of wood? Here, we consider a holistic picture ranging in scale from the science of the cell wall to the engineering and global policies that could maximise forestry and timber construction as a boon to both people and the planet.
Display omitted
•Transparent wood-based functional materials via a top-down approach are critical.•The process–structure–property–application relationship of TWMs is provided.•Nanoscience and ...nanotechnologies can manipulate and functionalize wood materials.•Tunable properties based on structural design and chemical decoration are summarized.•The sustainable development and emerging applications of TWMs are highlighted.
Transparent wood-based materials (TWMs), made by either bottom-up or top-down strategies, have attracted great attention owing to their transparency, sustainability and multifunctionality. Compared with materials prepared by a traditional bottom-up method, TWMs fabricated via a top-down approach are promising as the natural hierarchical structure of wood is preserved with a high production efficiency, energy savings and scalability. Wood nanotechnologies, various chemical treatments and polymer impregnation or densification techniques have been developed to fabricate TWMs, including transparent wood and transparent wood films, sharing similar sustainability and optical transmittance while also preserving some uniqueness in applications and compositions. Herein, we systematically provide an up-to-date summary on the state-of-the-art for transparent wood and transparent wood films, with a special highlight on the process–structure–property–application perspective, establishing the combination of wood science, material chemistry and physics with new horizons in TWM science. The integrated topics of TWMs emphasize the relationship between nanostructure and properties. The structural and functional design concepts are described for engineering production purposes. The emerging applications of TWMs are also discussed for the potential replacement of glass and petroleum-based plastics. Finally, an outlook and challenges are proposed for the future potential of functional TWMs in engineered production.
Magnetic wood is a composite material that achieves harmony between both woody and magnetic functions through the active addition of magnetic characteristics to the wood itself. In addition to ...showing magnetic characteristics, magnetic wood offers low specific gravity, humidity control and acoustic absorption ability. It has potential for broad applications in the fields of electromagnetic wave absorption, electromagnetic interference shielding, furniture, etc. This work reports on the synthesis of Fe3O4 nanoparticles (NPs) in wood from three tropical species (Pinus oocarpa, Vochysia ferruginea and Vochysia guatemalensis) using a solution of iron (III) hexahydrate and iron (II) chloride tetrahydrate with a molar ratio of 1.6:1 at a concentration of 1.2 mol/L ferric chlorate under 700 kPa pressure for 2 h. Afterward, the wood samples were impregnated with an ammonia solution with three different immersion times. The treated wood (wood composites) was evaluated for the weight gain percentage (WPG), density, ash content and Fe3O4 content by the Fourier transform infrared spectroscopy (FTIR) spectrum, X-ray diffraction (XRD) and vibrating sample magnetometry (VSM). The results show that the species P. oocarpa had the lowest values of WPG, and its density decreased in relation to the untreated wood, with lower ash and Fe3O4 NP content. The XRD and some FTIR signals associated with changes in the wood component showed small differences from the untreated wood. Fe3O4 NPs presented nanoparticles with the smallest diameter of (approx. 7.3 to 8.5 nm), and its saturation magnetization (Ms) parameters were the lowest. On the other hand, V. guatemalensis was the species with the best Ms values, but the wood composite had the lowest density. In relation to the different immersion times, the magnetic properties were not statistically affected. Finally, the magnetization values of the studied species were lower than those of the pure Fe3O4 nanoparticles, since the species only have a certain amount of these nanoparticles (NPs), and this was reflected proportionally in the magnetization of saturation.
This article aimed at thermally treating and charactering the Eucalyptus grandis wood under three different temperatures. For this, pristine eucalypt samples were treated by heating in a laboratory ...oven at 160 °C, 200 °C and 240 °C, always for 2 h. Treatment parameters (based on weight percentage loss and specific gravity), as well as mechanical (by hardness tests), chemical (by infrared spectroscopy), thermal (by thermogravimetry), and colorimetric (by CIELab method) features were evaluated. Compared to the pristine ones, the treated woods have there was a drop in apparent density at 12 % and consecutively greater thermal stability which is probably related to a previous partial degradation of some major amorphous components (namely cellulose, hemicellulose and lignin), as suggested by the treatment parameters and infrared spectra. Besides of that, the higher the temperature treatment, the higher the loss in surface hardness and the higher the colour darkening.
Display omitted
Transparent wood (TW) biocomposites combine high optical transmittance and good mechanical properties and can contribute to sustainable development. The safety against fire is ...important for building applications. Here, a “green” bleached wood reinforcement is impregnated by water soluble and flame-retardant melamine formaldehyde (MF) in a scalable process, for a wood content of 25 vol%. FE-SEM is used for characterization of optical defects and EDX to examine MF distribution at nanoscale cell wall pore space. Curing (FTIR-ATR), mechanical properties, optical transmittance (74% at 1.2 mm thickness) and flame-retardant properties are also characterized (self-extinguishing behavior and cone calorimetry), and scattering mechanisms are discussed. The fire growth rate of transparent wood was less than half the values for neat wood. Transparent wood/MF biocomposites show interesting wood-MF synergies and are of practical interest in building applications. Critical aspects of processing are analyzed for minimization of optical defects.
Display omitted
•A short-time impregnation process (70 min) achieves high weight percentage gain and uniform impregnation effect.•The modification can simultaneously enhance and toughen wood with ...improved effects of more than 100%.•The modified wood exhibited recyclability and retained satisfactory strength after reprocessing.
It is indeed challenging to simultaneously strengthen and toughen woody material while maintaining its recyclability using existing modification technology. In this study, we have successfully fabricated high-performance and re-processable basswood with outstanding dimensional stability through reactive waterborne acrylic resin impregnation. The pathways of resin movement within the basswood’s multi-scale structure were discussed in detail. In comparison with unmodified wood, the compressive strength parallel/perpendicular to the grain, hardness, and modulus of rupture (MOR) were increased by 73.8 %, 179.4 %, 406.1 %, and 113.6 %, respectively. The compressive strength reached the standard of C70 degree for concrete, and MOR complied with the highest standard (TB20) of hardwood used as a building material. Moreover, the impact bending strength was enhanced by 113.1 % compared with the unmodified wood. Additionally, the water uptake of modified wood was 85.4 % lower than the unmodified wood, and the anti-swelling effect reached up to 42.8 %. Furthermore, the modified wood demonstrated recyclability and retained satisfactory strength after reprocessing, with the tensile strength of the first recovery reaching 22.5 MPa and the flexural strength reaching 31.5 MPa. This study thus provided a novel strategy for creating high-performance and recyclable wood, which holds significant promise for expanding the application area of woody materials, especially as a replacement for non-renewable materials such as concrete in the construction field.
PDF
