-
Effects of selected printing parameters on the fire properties of 3D-printed neat polylactic acid (PLA) and wood/PLA composites [Elektronski vir]Knez, Nataša, 1970- ...The effects of selected printing parameters on the fire properties of additively produced composites from neat polylactic acid (PLA) and wood/PLA filaments were investigated. The reaction to fire of ... the 3D-printed specimens was tested according to the ISO 5660-1 cone calorimeter test method. The results showed that the properties of the specimens when exposed to fire were significantly affected by the incorporation of wood flour into the PLA filament. It was also interesting that PLA specimens had much better reactions to fire than the wood/PLA specimens. Time to ignition was found to be much longer in the 3D-printed PLA specimens. Although the maximal heat release rate was a little higher in the PLA than the wood/PLA specimens, the duration of HRR was longer for the wood/PLA specimens. The initial mass of the specimens was smaller in the wood/PLA composites, but during the radiant heat exposure the mass typically decreased slower than in the PLA specimens.Vir: Journal of renewable materials. - ISSN 2164-6341 (Vol. 9, no. 11, May 2021, str. 1883-1895)Vrsta gradiva - e-članek ; neleposlovje za odrasleLeto - 2021Jezik - angleškiCOBISS.SI-ID - 64464899
Avtor
Knez, Nataša, 1970- |
Kariž, Mirko |
Knez, Friderik |
Ayrilmis, Nadir |
Kitek Kuzman, Manja
Teme
protipožarna odpornost |
les |
polilaktična kislina (PLA) |
filament |
3D tiskalnik |
biokompozit |
odprti dostop |
reaction to fire |
wood |
polylactic acid (PLA) |
filament |
3D printer |
biocomposite |
open access
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Avtor | Knez, Nataša, 1970- ... |
Naslov | Effects of selected printing parameters on the fire properties of 3D-printed neat polylactic acid (PLA) and wood/PLA composites [Elektronski vir] |
Datum objave | 2021-05-25 |
COBISS.SI-ID | 64464899 |
Verzija objave v repozitoriju | Založnikova različica |
Licenca objave v repozitoriju | Creative Commons Priznanje avtorstva 4.0 Mednarodna |
Embargo | Takojšnja javna objava |
Projekti, iz katerih je bila financirana objava
Naziv | Akronim | Številka projekta | Financer |
---|---|---|---|
Les in lignocelulozni kompoziti | P4-0015-2020 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
|
Study on the functional properties and thermal safety performance of wood materials and adhesives for 3D printing technology | BI-CN/18-20-016 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
Datoteke, ki spadajo k objavi
Povezava |
---|
![]() |
![]() |
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Knez, Nataša, 1970- | 14926 |
Kariž, Mirko | 29227 |
Knez, Friderik | 14943 |
Ayrilmis, Nadir | ![]() |
Kitek Kuzman, Manja | 20385 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.