Univerza na Primorskem Univerzitetna knjižnica - vsi oddelki (UPUK)
-
Bending properties of deconstructable cross-laminated timber-concrete composite floor elementsDerikvand, Mohammad ; Fink, Gerhard, lesarDesign for disassembly using deconstructable connections facilitates recycling and reusing of building materials and, therefore, reduces waste management problems at the end of service life. In this ... regard, a deconstructable timber-concrete composite connector using self-tapping screws has been developed at Aalto University. In the presented research, an experimental investigation was performed to further evaluate the effectiveness of this connector in fabricating deconstructable cross-laminated timber (CLT)-concrete composite floors. For this purpose, several CLT-concrete composite beams were fabricated using 5-layer CLT and low-shrinkage concrete. Each beam contained one row of connectors to represent a strip of a full-scale floor. The vibration performance, bending properties, interface slip, failure modes, and ease of disassembly of the beams were investigated. The results were compared with the ones from a reference group of beams fabricated with regular screws. Overall, the deconstructable beams performed exceptionally well by attaining 98.5% of the average bending stiffness of the regular beams. The load-carrying capacity was also similar but governed by the CLT plate. The vibration characteristics were comparable in both groups. After the bending test, the deconstructable beams were disassembled. Although the beams had been exposed to unproportionally large deformations under the bending load, the disassembly process was performed successfully.Vir: Wood Material Science & Engineering. - ISSN 1748-0272 (Vol. 17, iss. 4, 2022, str. 253-260)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2022Jezik - angleškiCOBISS.SI-ID - 179742723
Avtor
Derikvand, Mohammad |
Fink, Gerhard, lesar
Teme
vibration |
stiffness |
design for disassembly |
vibracije |
togost |
zasnova za demontažo
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Derikvand, Mohammad | 58359 |
Fink, Gerhard, lesar |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: