In recent decades, electrochemical detection of arsenic(III) has been undergoing revolutionary developments with higher sensitivity and lower detection limit. Despite great success, electrochemical detection of As(III) still depends heavily on noble metals (predominantly Au) in a strong acid condition, thus increasing the cost and hampering the widespread application. Here, we report a disposable platform completely free from noble metals for electrochemical detection of As(III) in drinking water under nearly neutral condition by square wave anodic stripping voltammetry. By combining the high adsorptivity of Fe3O4 microspheres toward As(III) and the advantages of room temperature ionic liquid (RTIL), the Fe3O4-RTIL composite modified screen-printed carbon electrode (SPCE) showed even better electrochemical performance than commonly used noble metals. Several ionic liquids with different viscosities and surface tensions were found to have a different effect on the voltammetric behavior toward As(III). Under the optimized conditions, the Fe3O4-RTIL composites offered direct detection of As(III) within the desirable range (10 ppb) in drinking water as specified by the World Health Organization (WHO), with a detection limit (3σ method) of 8 × 10(-4) ppb. The obtained sensitivity was 4.91 μA ppb(-1), which is the highest as far as we know. In addition, a possible mechanism for As(III) preconcentration based on adsorption has been proposed and supported by designed experiments. Finally, this platform was successfully applied to analyzing a real sample collected from Inner Mongolia, China.