This study addressed to determine the flexural properties of hybrid composite laminates (HCAFRE) under the strain rate sensitivity. The hybrid composite laminate was formed as consecutive stacking of a sequence of plain woven carbon fiber reinforced epoxy (CFRE) and a plain-woven aramid fiber reinforced epoxy (AFRE) laminates. The flexural tests were carried out at four different strain rates (0.01, 0.11, 0.55, 1.1 s−1) to determine the strain rate sensitivity of the HCAFRE. Moreover, the strain rate sensitivity of CFRE and AFRE was also determined individually. The effect of different fiber orientations (0°, 45°, and 90°) on the flexural properties of the composite laminates were also investigated at the scope of this study. In numerical analysis, composite laminates (CFRE, AFRE, and HCAFRE) were constituted in LS-DYNA finite element program using the Cowper-Symonds material model (MAT 112) which includes strain rate dependency. Consequently, it was seen that the experimental and numerical results were indicated a similar tendency to each other. Therefore, it was understood that the Cowper-Symonds material model is suited for the flexural behavior model of composite laminates under different strain rates.