E-viri
Recenzirano
Odprti dostop
-
Drušković, Morana; Vouk, Dražen; Kučić Grgić, Dajana; Šiljeg, Mario
Sustainability, 05/2024, Letnik: 16, Številka: 10Journal Article
Electrochemical wastewater treatment technologies are increasingly being used in practice, and the combination of electrocoagulation with advanced oxidation processes has been shown to increase treatment efficiency. The treatment of oily wastewater produces electrocoagulated metal sludge (EMS). In this work, the possibility of using different ratios of EMS produced during oily wastewater treatment was investigated. EMS was dried conventionally in an oven at 105 °C and used as a partial substitute for clay in the manufacture of laboratory bricks. The main research objectives of this study were to examine the possibility and justification of introducing EMS in brick production. The results show that an increase in the proportion of EMS in the manufacturing of bricks leads to a deterioration in the quality of the bricks. Bricks with an addition of 1 wt% and 5 wt% EMS showed the best properties. The loss on ignition (LOI), compressive strength, boiling water absorption and initial water absorption were determined at 5.7%; 49 N/mm2, 16%, 14 g/min/200 cm2, 15% for modified bricks with 1 wt% EMS and 6.3%, 48 N/mm2, 20%, 15 g/min/200 cm2 for modified brick with 5 wt%.
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|
Vir: Osebne bibliografije
in: SICRIS
To gradivo vam je dostopno v celotnem besedilu. Če kljub temu želite naročiti gradivo, kliknite gumb Nadaljuj.